Date: Mon, 21 Sep 2020 09:54:09 +0200 From: Niclas Zeising <zeising+freebsd@daemonic.se> To: KIRIYAMA Kazuhiko <kiri@truefc.org>, x11@FreeBSD.org Subject: Re: GTX 1050Ti can't plugin-play usb devices Message-ID: <9eb6fce2-61d3-9938-6d3c-73440399b8d4@daemonic.se> In-Reply-To: <202009210642.08L6gdmb037247@kx.truefc.org> References: <202009210642.08L6gdmb037247@kx.truefc.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2020-09-21 08:42, KIRIYAMA Kazuhiko wrote: > Hi, folks > > I've implemented NVIDIA GTX 1050Ti in Supermicro X11SPM-F > machine and built up X environment on 13.0-CURRENT > (r363381). All went right and `startx' successfully done. > But usb tools could not plugin-played. After pull out usb > and pull in, keyboard, mouse and usbaudio all were not > responded. I killed X at remote machine, then all worked > again. Is there any keybord or mouse device fixed by xorg ? > You need to remove the configuration for keyboard and mouse, and have it use libinput instead, to get auto configuration of input devices in X on FreeBSD 12.1 and later. > /etc/X11/xorg.conf: > # nvidia-xconfig: X configuration file generated by nvidia-xconfig > # nvidia-xconfig: version 440.100 > > > Section "ServerLayout" > Identifier "X.org Configured" > Screen 0 "Screen0" 0 0 > Screen 1 "Screen1" RightOf "Screen0" > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" Remove the two lines above. > EndSection > > Section "Files" > ModulePath "/usr/local/lib/xorg/modules" > FontPath "/usr/local/share/fonts/misc/" > FontPath "/usr/local/share/fonts/TTF/" > FontPath "/usr/local/share/fonts/OTF/" > FontPath "/usr/local/share/fonts/Type1/" > FontPath "/usr/local/share/fonts/100dpi/" > FontPath "/usr/local/share/fonts/75dpi/" > FontPath "catalogue:/usr/local/etc/X11/fontpath.d" > EndSection > > Section "Module" > Load "glxserver_nvidia" > Load "glx" > EndSection > > Section "InputDevice" > Identifier "Keyboard0" > Driver "kbd" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "auto" > Option "Device" "/dev/sysmouse" > Option "ZAxisMapping" "4 5 6 7" > EndSection Remove the two sections above. > > Section "Monitor" > Identifier "Monitor0" > VendorName "Monitor Vendor" > ModelName "Monitor Model" > HorizSync 28.0 - 33.0 > VertRefresh 43.0 - 72.0 > Option "DPMS" > EndSection > > Section "Monitor" > Identifier "Monitor1" > VendorName "Monitor Vendor" > ModelName "Monitor Model" > HorizSync 28.0 - 33.0 > VertRefresh 43.0 - 72.0 > Option "DPMS" > EndSection > > Section "Device" > Identifier "Card0" > Driver "nvidia" > BusID "PCI:101:0:0" > EndSection > > Section "Device" > > ### Available Driver options are:- > ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", > ### <percent>: "<f>%" > ### [arg]: arg optional > #Option "SWcursor" # [<bool>] > #Option "kmsdev" # <str> > #Option "ShadowFB" # [<bool>] > #Option "AccelMethod" # <str> > #Option "PageFlip" # [<bool>] > #Option "ZaphodHeads" # <str> > #Option "DoubleShadow" # [<bool>] > #Option "Atomic" # [<bool>] > Identifier "Card1" > Driver "nvidia" > BusID "PCI:3:0:0" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Card0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > Depth 1 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 4 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 8 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 15 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 16 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "1920x1080" > EndSubSection > EndSection > > Section "Screen" > Identifier "Screen1" > Device "Card1" > Monitor "Monitor1" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > Depth 1 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 4 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 8 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 15 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 16 > EndSubSection > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "1920x1080" > EndSubSection > EndSection > Regards -- Niclas
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?9eb6fce2-61d3-9938-6d3c-73440399b8d4>