Date: Mon, 2 Mar 2015 21:31:47 +0100 (CET) From: Wojciech Puchar <wojtek@puchar.net> To: FreeBSD-hackers@freebsd.org Subject: SATA set features failed Message-ID: <alpine.BSF.2.11.1503022129550.728@laptop.wojtek.intra>
next in thread | raw e-mail | index | archive | help
this shows on booting on my new crucial M100 SSD in lenovo B590 (aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 05 00 (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 05 00 (aprobe0:ahcich0:0:0:0): Retrying command (aprobe0:ahcich0:0:0:0): SETFEATURES ENABLE SATA FEATURE. ACB: ef 10 00 00 00 40 00 00 00 00 05 00 (aprobe0:ahcich0:0:0:0): CAM status: ATA Status Error (aprobe0:ahcich0:0:0:0): ATA status: 51 (DRDY SERV ERR), error: 04 (ABRT ) (aprobe0:ahcich0:0:0:0): RES: 51 04 00 00 00 40 00 00 00 05 00 (aprobe0:ahcich0:0:0:0): Error 5, Retries exhausted ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <Crucial CT128MX100SSD1 MU01> ATA-9 SATA 3.x device ada0: Serial Number 14450DBF9558 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device what does it means? what feature cannot be enabled? otherwise - SSD works fine.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.11.1503022129550.728>