From owner-freebsd-bugs Mon Mar 2 20:10:17 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id UAA25770 for freebsd-bugs-outgoing; Mon, 2 Mar 1998 20:10:17 -0800 (PST) (envelope-from owner-freebsd-bugs@FreeBSD.ORG) Received: (from gnats@localhost) by hub.freebsd.org (8.8.8/8.8.8) id UAA25763; Mon, 2 Mar 1998 20:10:14 -0800 (PST) (envelope-from gnats) Received: (from nobody@localhost) by hub.freebsd.org (8.8.8/8.8.8) id UAA25318; Mon, 2 Mar 1998 20:07:58 -0800 (PST) (envelope-from nobody) Message-Id: <199803030407.UAA25318@hub.freebsd.org> Date: Mon, 2 Mar 1998 20:07:58 -0800 (PST) From: jason_smethers@bigfoot.com To: freebsd-gnats-submit@FreeBSD.ORG X-Send-Pr-Version: www-1.0 Subject: kern/5904: panic: newfs Sender: owner-freebsd-bugs@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org >Number: 5904 >Category: kern >Synopsis: panic: newfs >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Mar 2 20:10:01 PST 1998 >Last-Modified: >Originator: Jason Smethers >Organization: >Release: 3.0-current >Environment: FreeBSD p90unix.vipersystems.com 3.0-CURRENT FreeBSD 3.0-CURRENT #8: Sun Mar 1 12:32:53 CST 1998 jason@p90unix.vipersystems.com:/usr/src/sys/compile/P90UNIX i386 >Description: When newfs a drive with: su-2.01#umount /dev/wd3c su-2.01#newfs -b 8192 -f 1024 /dev/wd3c the system panics with: panic: bremfree removing a buffer whan not on a queue and the machine is unable to sync disks. newfs gets as far as: Warning: 3568 sector(s) in last cylinder unallocated /dev/wd3c: 332304 sectors in 82 cylinders of 1 tracks, 4096 sectors 162.3MB in 6 cyl groups (16 c/g, 32.00MB/g, 6784 i/g) super-block backups (for fsck -b #) at: dmesg: su-2.01# dmesg Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-CURRENT #8: Sun Mar 1 12:32:53 CST 1998 jason@p90unix.vipersystems.com:/usr/src/sys/compile/P90UNIX Timecounter "i8254" frequency 1193182 Hz cost 3241 ns CPU: Pentium (0.00-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x521 Stepping=1 Features=0x1bf real memory = 33554432 (32768K bytes) avail memory = 30449664 (29736K bytes) Probing for devices on PCI bus 0: chip0: rev 0x02 on pci0.0.0 chip1: rev 0x02 on pci0.7.0 ide_pci0: rev 0x02 on pci0.7.1 ahc0: rev 0x00 int a irq 11 on pci0.18.0 ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs ahc0: waiting for scsi devices to settle scbus0 at ahc0 bus 0 ahc0:A:1: refuses synchronous negotiation. Using asynchronous transfers cd0 at scbus0 target 1 lun 0 cd0: type 5 removable SCSI 2 cd0: CD-ROM cd present [-1263529487 x -326294800 byte records] vga0: rev 0x00 on pci0.19.0 fxp0: rev 0x01 int a irq 10 on pci0.20.0 fxp0: Ethernet address 00:a0:c9:00:ad:f3 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 flags 0xfccf80ff on isa wdc0: unit 0 (wd0): , 32-bit wd0: 124MB (255255 sectors), 1001 cyls, 15 heads, 17 S/T, 512 B/S wdc0: unit 1 (wd1): , 32-bit, multi-block-8, sleep-hack wd1: 1039MB (2128896 sectors), 2816 cyls, 12 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 flags 0x80ff80ff on isa wdc1: unit 0 (wd2): , 32-bit, multi-block-8 wd2: 162MB (333630 sectors), 1011 cyls, 15 heads, 22 S/T, 512 B/S wdc1: unit 1 (wd3): , 32-bit, multi-block-16 wd3: 162MB (332304 sectors), 903 cyls, 8 heads, 46 S/T, 512 B/S npx0 on motherboard npx0: INT 16 interface Intel Pentium F00F detected, installing workaround WARNING: / was not properly dismounted. kernel config: su-2.01# cat P90UNIX # # P90UNIX -- Custom kernel # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.105 1998/01/24 02:54:09 eivind Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" cpu "I586_CPU" #cpu "I686_CPU" ident "P90UNIX" maxusers 10 #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem #options "CD9660_ROOT" #CD-ROM usable as root device options FFS_ROOT #FFS usable as root device [keep this!] options NFS_ROOT #NFS usable as root device options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=10 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options USER_LDT #allow user-level control of i386 ldt options "MD5" options "VM86" options QUOTA #enable disk quotas config kernel root on wd0 controller isa0 #controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 #tape ft0 at fdc0 drive 2 #options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0x80fccf80ff vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 flags 0x80ff80ff vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 #options ATAPI #Enable ATAPI support for IDE bus #options ATAPI_STATIC #Don't do it as an LKM #device wcd0 #IDE CD-ROM #device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. #controller ncr0 #controller amd0 #controller ahb0 controller ahc0 #controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr controller scbus0 #base SCSI code device sd0 #SCSI disks device od0 #See LINT for possible `od' options. device st0 #SCSI CD-ROMs device cd0 #SCSI optical disk #Only need one of these, the code dynamically grows #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std options SC_HISTORY_SIZE=200 device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr #device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr #device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr #device lpt1 at isa? port? tty #device mse0 at isa? port 0x23c tty irq 5 vector mseintr #device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. #device de0 device fxp0 #device tx0 #device vx0 #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device ex0 at isa? port? net irq? vector exintr #device fe0 at isa? port 0x300 net irq ? vector feintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr pseudo-device loop pseudo-device ether #pseudo-device sl 1 pseudo-device ppp 1 pseudo-device tun 1 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM options SYSVSEM options SYSVMSG rc.conf: su-2.01# cat rc.conf #!/bin/sh # # This is rc.conf - a file full of useful variables that you can set # to change the default startup behavior of your system. # # All arguments must be in double or single quotes. # # $Id: rc.conf,v 1.37 1998/02/01 00:20:53 wollman Exp $ ############################################################## ### Important initial Boot-time options ##################### ############################################################## swapfile="NO" # Set to name of swapfile if aux swapfile desired." # Set to name of swapfile if aux swapfile desired." # Set to name of swapfile if aux swapfile desired." # Set to name of swapfile if aux swapfile desired. apm_enable="NO" # Set to YES if you want APM enabled." # Set to YES if you want APM enabled." # Set to YES if you want APM enabled." # Set to YES if you want APM enabled. pccard_enable="NO" # Set to YES if you want to configure PCCARD devices." # Set to YES if you want to configure PCCARD devices." # Set to YES if you want to configure PCCARD devices." # Set to YES if you want to configure PCCARD devices. pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address." # If pccard_enable=YES, this is card memory address." # If pccard_enable=YES, this is card memory address." # If pccard_enable=YES, this is card memory address. pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO)." # Specialized pccard ethernet configuration (or NO)." # Specialized pccard ethernet configuration (or NO)." # Specialized pccard ethernet configuration (or NO). local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs." # startup script dirs." # startup script dirs." # startup script dirs. local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs" # periodic script dirs" # periodic script dirs" # periodic script dirs ############################################################## ### Network configuration sub-section ###################### ############################################################## ### Basic network options: ### hostname="p90unix.vipersystems.com" # Set this!" # Set this!" # Set this!" # Set this! nisdomainname="NO" # Set to NIS domain if using NIS (or NO)." # Set to NIS domain if using NIS (or NO)." # Set to NIS domain if using NIS (or NO)." # Set to NIS domain if using NIS (or NO). firewall_enable="NO" # Set to YES to enable firewall functionality" # Set to YES to enable firewall functionality" # Set to YES to enable firewall functionality" # Set to YES to enable firewall functionality firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)" # Firewall type (see /etc/rc.firewall)" # Firewall type (see /etc/rc.firewall)" # Firewall type (see /etc/rc.firewall) firewall_quiet="NO" # Set to YES to suppress rule display" # Set to YES to suppress rule display" # Set to YES to suppress rule display" # Set to YES to suppress rule display tcp_extensions="YES" # Allow RFC1323 & RFC1644 extensions (or NO)." # Allow RFC1323 & RFC1644 extensions (or NO)." # Allow RFC1323 & RFC1644 extensions (or NO)." # Allow RFC1323 & RFC1644 extensions (or NO). network_interfaces="fxp0 lo0" # List of network interfaces (lo0 is loopback)." # List of network interfaces (lo0 is loopback)." # List of network interfaces (lo0 is loopback)." # List of network interfaces (lo0 is loopback). ifconfig_fxp0="inet 111.111.111.6 netmask 255.255.255.0" ifconfig_fxp0_alias0="inet 111.111.111.9 netmask 255.255.255.0" ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration." # default loopback device configuration." # default loopback device configuration." # default loopback device configuration. #ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. ### Network daemon (miscellaneous) & NFS options: ### syslogd_enable="YES" # Run syslog daemon (or NO)." # Run syslog daemon (or NO)." # Run syslog daemon (or NO)." # Run syslog daemon (or NO). syslogd_flags="" # Flags to syslogd (if enabled)." # Flags to syslogd (if enabled)." # Flags to syslogd (if enabled)." # Flags to syslogd (if enabled). inetd_enable="YES" # Run the network daemon dispatcher (or NO)." # Run the network daemon dispatcher (or NO)." # Run the network daemon dispatcher (or NO)." # Run the network daemon dispatcher (or NO). inetd_flags="" # Optional flags to inetd." # Optional flags to inetd." # Optional flags to inetd." # Optional flags to inetd. named_enable="YES" # Run named, the DNS server (or NO)." # Run named, the DNS server (or NO)." # Run named, the DNS server (or NO)." # Run named, the DNS server (or NO). named_program="/usr/local/sbin/named" # named program, in case we want bind8 instead." # named program, in case we want bind8 instead." # named program, in case we want bind8 instead." # named program, in case we want bind8 instead. named_flags="-b /etc/namedb/named.conf" # Flags to named (if enabled)." # Flags to named (if enabled)." # Flags to named (if enabled)." # Flags to named (if enabled). kerberos_server_enable="YES" # Run a kerberos master server (or NO)." # Run a kerberos master server (or NO)." # Run a kerberos master server (or NO)." # Run a kerberos master server (or NO). kadmind_server_enable="YES" # Run kadmind (or NO) -- do not run on" # Run kadmind (or NO) -- do not run on" # Run kadmind (or NO) -- do not run on" # Run kadmind (or NO) -- do not run on # a slave kerberos server kerberos_stash="YES" # Is the kerberos master key stashed?" # Is the kerberos master key stashed?" # Is the kerberos master key stashed?" # Is the kerberos master key stashed? rwhod_enable="NO" # Run the rwho daemon (or NO)." # Run the rwho daemon (or NO)." # Run the rwho daemon (or NO)." # Run the rwho daemon (or NO). amd_enable="NO" # Run amd service with $amd_flags (or NO)." # Run amd service with $amd_flags (or NO)."# Run amd service with $amd_flags (or NO)." # Run amd service with $amd_flags (or NO). amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map" nfs_client_enable="YES" # This host is an NFS client (or NO)." # This host is an NFS client (or NO)." # This host is an NFS client (or NO)." # This host is an NFS client (or NO). nfs_client_flags="-n 4" # Flags to nfsiod (if enabled)." # Flags to nfsiod (if enabled)." # Flags to nfsiod (if enabled)." # Flags to nfsiod (if enabled). nfs_server_enable="YES" # This host is an NFS server (or NO)." # This host is an NFS server (or NO)." # This host is an NFS server (or NO)." # This host is an NFS server (or NO). nfs_server_flags="-u -t 4" # Flags to nfsd (if enabled)." # Flags to nfsd (if enabled)." # Flags to nfsd (if enabled)." # Flags to nfsd (if enabled). mountd_flags="-r" # Flags to mountd (if NFS server enabled)." # Flags to mountd (if NFS server enabled)."# Flags to mountd (if NFS server enabled)." # Flags to mountd (if NFS server enabled). nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO)." # Provide NFS only on secure port (or NO)."# Provide NFS only on secure port (or NO)." # Provide NFS only on secure port (or NO). rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server." # Run NFS rpc.lockd (*broken!*) if nfs_server." # Run NFS rpc.lockd (*broken!*) if nfs_server." # Run NFS rpc.lockd (*broken!*) if nfs_server. rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO)." # Run NFS rpc.statd if nfs_server (or NO)."# Run NFS rpc.statd if nfs_server (or NO)." # Run NFS rpc.statd if nfs_server (or NO). portmap_enable="YES" # Run the portmapper service (or NO)." # Run the portmapper service (or NO)." # Run the portmapper service (or NO)." # Run the portmapper service (or NO). portmap_flags="" # Flags to portmap (if enabled)." # Flags to portmap (if enabled)." # Flags to portmap (if enabled)." # Flags to portmap (if enabled). xtend_enable="NO" # Run the X-10 power controller daemon." # Run the X-10 power controller daemon." # Run the X-10 power controller daemon." # Run the X-10 power controller daemon. xtend_flags="" # Flags to xtend (if enabled)." # Flags to xtend (if enabled)." # Flags to xtend (if enabled)." # Flags to xtend (if enabled). ### Network Time Services options: ### timed_enable="NO" # Run the time daemon (or NO)." # Run the time daemon (or NO)." # Run the time daemon (or NO)." # Run the time daemon (or NO). timed_flags="" # Flags to timed (if enabled)." # Flags to timed (if enabled)." # Flags to timed (if enabled)." # Flags to timed (if enabled). ntpdate_enable="NO" # Run the ntpdate to sync time (or NO)." # Run the ntpdate to sync time (or NO)." # Run the ntpdate to sync time (or NO)." # Run the ntpdate to sync time (or NO). ntpdate_flags="" # Flags to ntpdate (if enabled)." # Flags to ntpdate (if enabled)." # Flags to ntpdate (if enabled)." # Flags to ntpdate (if enabled). xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO)." # Run xntpd Network Time Protocol (or NO)."# Run xntpd Network Time Protocol (or NO)." # Run xntpd Network Time Protocol (or NO). xntpd_flags="" # Flags to xntpd (if enabled)." # Flags to xntpd (if enabled)." # Flags to xntpd (if enabled)." # Flags to xntpd (if enabled). tickadj_enable="NO" # Run tickadj (or NO)." # Run tickadj (or NO)." # Run tickadj (or NO)." # Run tickadj (or NO). tickadj_flags="-Aq" # Flags to tickadj (if enabled)." # Flags to tickadj (if enabled)." # Flags to tickadj (if enabled)." # Flags to tickadj (if enabled). # Network Information Services (NIS) options: ### nis_client_enable="NO" # We're an NIS client (or NO)." # We're an NIS client (or NO)." # We're an NIS client (or NO)." # We're an NIS client (or NO). nis_client_flags="" # Flags to ypbind (if enabled)." # Flags to ypbind (if enabled)." # Flags to ypbind (if enabled)." # Flags to ypbind (if enabled). nis_ypset_enable="NO" # Run ypset at boot time (or NO)." # Run ypset at boot time (or NO)." # Run ypset at boot time (or NO)." # Run ypset at boot time (or NO). nis_ypset_flags="" # Flags to ypset (if enabled)." # Flags to ypset (if enabled)." # Flags to ypset (if enabled)." # Flags to ypset (if enabled). nis_server_enable="NO" # We're an NIS server (or NO)." # We're an NIS server (or NO)." # We're an NIS server (or NO)." # We're an NIS server (or NO). nis_server_flags="" # Flags to ypserv (if enabled)." # Flags to ypserv (if enabled)." # Flags to ypserv (if enabled)." # Flags to ypserv (if enabled). nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO)." # Run rpc.ypxfrd at boot time (or NO)." # Run rpc.ypxfrd at boot time (or NO)." # Run rpc.ypxfrd at boot time (or NO). nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled)." # Flags to rpc.ypxfrd (if enabled)." # Flags to rpc.ypxfrd (if enabled)." # Flags to rpc.ypxfrd (if enabled). nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO)." # Run rpc.yppasswdd at boot time (or NO)." # Run rpc.yppasswdd at boot time (or NO)." # Run rpc.yppasswdd at boot time (or NO). nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled)." # Flags to rpc.yppasswdd (if enabled)." # Flags to rpc.yppasswdd (if enabled)." # Flags to rpc.yppasswdd (if enabled). ### Network routing options: ### defaultrouter="111.111.111.1" # Set to default gateway (or NO)." # Set to default gateway (or NO)." # Set to default gateway (or NO)." # Set to default gateway (or NO). static_routes="" # Set to static route list (or leave empty)." # Set to static route list (or leave empty)." # Set to static route list (or leave empty)." # Set to static route list (or leave empty). gateway_enable="YES" # Set to YES if this host will be a gateway." # Set to YES if this host will be a gateway." # Set to YES if this host will be a gateway." # Set to YES if this host will be a gateway. router_enable="NO" # Set to YES to enable a routing daemon." # Set to YES to enable a routing daemon." # Set to YES to enable a routing daemon." # Set to YES to enable a routing daemon. router="routed" # Name of routing daemon to use if enabled." # Name of routing daemon to use if enabled.# Name of routing daemon to use if enabled." # Name of routing daemon to use if enabled. router_flags="-q" # Flags for routing daemon." # Flags for routing daemon." # Flags for routing daemon." # Flags for routing daemon. mrouted_enable="YES" # Do multicast routing (see /etc/mrouted.conf)." # Do multicast routing (see /etc/mrouted.conf)." # Do multicast routing (see /etc/mrouted.conf)." # Do multicast routing (see /etc/mrouted.conf). mrouted_flags="" # Flags for multicast routing daemon." # Flags for multicast routing daemon." # Flags for multicast routing daemon." # Flags for multicast routing daemon. ipxgateway_enable="NO" # Set to YES to enable IPX routing." # Set to YES to enable IPX routing." # Set to YES to enable IPX routing." # Set to YES to enable IPX routing. ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon." # Set to YES to run the IPX routing daemon.# Set to YES to run the IPX routing daemon." # Set to YES to run the IPX routing daemon. ipxrouted_flags="" # Flags for IPX routing daemon." # Flags for IPX routing daemon." # Flags for IPX routing daemon." # Flags for IPX routing daemon. arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL." # replaces obsolete kernel option ARP_PROXYALL." # replaces obsolete kernel option ARP_PROXYALL." # replaces obsolete kernel option ARP_PROXYALL. ############################################################## ### System console options ################################# ############################################################## keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO)." # keymap in /usr/share/syscons/keymaps/* (or NO)." # keymap in /usr/share/syscons/keymaps/* (or NO)." # keymap in /usr/share/syscons/keymaps/* (or NO). keyrate="NO" # keyboard rate to: slow, normal, fast (or NO)." # keyboard rate to: slow, normal, fast (or NO)." # keyboard rate to: slow, normal, fast (or NO)." # keyboard rate to: slow, normal, fast (or NO). keybell="NO" # bell to duration.pitch or normal or visual (or NO)." # bell to duration.pitch or normal or visual (or NO)." # bell to duration.pitch or normal or visual (or NO)." # bell to duration.pitch or normal or visual (or NO). keychange="NO" # function keys default values (or NO)." # function keys default values (or NO)." # function keys default values (or NO)." # function keys default values (or NO). cursor="NO" # cursor type {normal|blink|destructive} (or NO)." # cursor type {normal|blink|destructive} (or NO)." # cursor type {normal|blink|destructive} (or NO)." # cursor type {normal|blink|destructive} (or NO). scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO)." # screen map in /usr/share/syscons/scrnmaps/* (or NO)." # screen map in /usr/share/syscons/scrnmaps/* (or NO)." # screen map in /usr/share/syscons/scrnmaps/* (or NO). font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO)." # font 8x16 from /usr/share/syscons/fonts/* (or NO)." # font 8x16 from /usr/share/syscons/fonts/* (or NO)." # font 8x16 from /usr/share/syscons/fonts/* (or NO). font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO)." # font 8x14 from /usr/share/syscons/fonts/* (or NO)." # font 8x14 from /usr/share/syscons/fonts/* (or NO)." # font 8x14 from /usr/share/syscons/fonts/* (or NO). font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO)." # font 8x8 from /usr/share/syscons/fonts/* (or NO)." # font 8x8 from /usr/share/syscons/fonts/* (or NO)." # font 8x8 from /usr/share/syscons/fonts/* (or NO). blanktime="300" # blank time (in seconds) or "NO" to turn it off." # blank time (in seconds) or "NO" to turn it off." # blank time (in seconds) or "NO" to turn it off." # blank time (in seconds) or "NO" to turn it off. saver="blank" # screen saver: blank/daemon/green/snake/star/NO." # screen saver: blank/daemon/green/snake/star/NO." # screen saver: blank/daemon/green/snake/star/NO." # screen saver: blank/daemon/green/snake/star/NO. moused_type="NO" # See man page for rc.conf(5) for available settings." # See man page for rc.conf(5) for available settings." # See man page for rc.conf(5) for available settings." # See man page for rc.conf(5) for available settings. moused_port="/dev/cuaa0" # Set to your mouse port (required if mousetype set)." # Set to your mouse port (required if mousetype set)." # Set to your mouse port (required if mousetype set)." # Set to your mouse port (required if mousetype set). moused_flags="" # Any additional flags to moused." # Any additional flags to moused." # Any additional flags to moused." # Any additional flags to moused. ############################################################## ### Miscellaneous administrative options ################### ############################################################## cron_enable="YES" # Run the periodic job daemon." # Run the periodic job daemon." # Run the periodic job daemon." # Run the periodic job daemon. lpd_enable="NO" # Run the line printer daemon." # Run the line printer daemon." # Run the line printer daemon." # Run the line printer daemon. lpd_flags="" # Flags to lpd (if enabled)." # Flags to lpd (if enabled)." # Flags to lpd (if enabled)." # Flags to lpd (if enabled). sendmail_enable="YES" # Run the sendmail daemon (or NO)." # Run the sendmail daemon (or NO)." # Run the sendmail daemon (or NO)." # Run the sendmail daemon (or NO). sendmail_flags="-bd -q30m" # -bd is pretty mandatory." # -bd is pretty mandatory." # -bd is pretty mandatory."# -bd is pretty mandatory. dumpdev="NO" # Device name to crashdump to (if enabled)." # Device name to crashdump to (if enabled)." # Device name to crashdump to (if enabled)." # Device name to crashdump to (if enabled). check_quotas="YES" # Check quotas (or NO)." # Check quotas (or NO)." # Check quotas (or NO)." # Check quotas (or NO). accounting_enable="NO" # Turn on process accounting (or NO)." # Turn on process accounting (or NO)." # Turn on process accounting (or NO)." # Turn on process accounting (or NO). ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO)." # Ibcs2 (SCO) emulation loaded at startup (or NO)." # Ibcs2 (SCO) emulation loaded at startup (or NO)." # Ibcs2 (SCO) emulation loaded at startup (or NO). linux_enable="YES" # Linux emulation loaded at startup (or NO)." # Linux emulation loaded at startup (or NO)." # Linux emulation loaded at startup (or NO)." # Linux emulation loaded at startup (or NO). rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO)." # Stir the entropy pool (like "5 11" or NO)." # Stir the entropy pool (like "5 11" or NO)." # Stir the entropy pool (like "5 11" or NO). clear_tmp_enable="NO" # Clear /tmp at startup." # Clear /tmp at startup." # Clear /tmp at startup." # Clear /tmp at startup. ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" # shared library search paths" # shared library search paths" # shared library search paths" # shared library search paths ############################################################## ### Allow local configuration override at the very end here ## ############################################################## if [ -f /etc/rc.conf.local ]; then . /etc/rc.conf.local fi >How-To-Repeat: See above. >Fix: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message