Date: Sun, 3 Jun 2012 21:25:36 +0200 From: Baptiste Daroussin <bapt@FreeBSD.org> To: Roland Smith <rsmith@xs4all.nl> Cc: freebsd-ports@FreeBSD.org Subject: Re: optionsng ignores /var/db/ports/<portname>/options Message-ID: <20120603192536.GA98939@ithaqua.etoilebsd.net> In-Reply-To: <20120603192023.GA8350@slackbox.erewhon.net> References: <20120603192023.GA8350@slackbox.erewhon.net>
next in thread | previous in thread | raw e-mail | index | archive | help
--n8g4imXOkfNTN/H1 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sun, Jun 03, 2012 at 09:20:23PM +0200, Roland Smith wrote: > [Please cc me, since I'm not subscribed to this list. I originally asked = this > on questions@.] >=20 > Hi, >=20 > With the release of the new options framework for ports, I've run into a > problem trying to convert one of my ports. >=20 > The nature of the problem is that the port seems to ignore the setting st= ored > in /var/db/ports/<portname>/options: >=20 > I've used 'make config' to set the PYCAIRO option to on; >=20 > slackbox# cat /var/db/ports/py27-py-stl/options > # This file is auto-generated by 'make config'. > # Options for py27-py-stl-3.1 > _OPTIONS_READ=3Dpy27-py-stl-3.1 > _FILE_COMPLETE_OPTIONS_LIST=3DPYCAIRO > OPTIONS_FILE_SET+=3DPYCAIRO >=20 > But the port seems to ignore it: >=20 > slackbox# make showconfig > =3D=3D=3D> The following configuration options are available for py27-py-= stl-3.1: > PYCAIRO=3Doff: Use (py)Cairo to enable stl2pdf > =3D=3D=3D> Use 'make config' to modify these settings >=20 > slackbox# make -V PORT_OPTIONS > DOCS EXAMPLES NLS >=20 > Every time I do 'make config', the PYCAIRO option will be unset, even if = it > shows as set in /var/db/ports/<portname>/options! >=20 > My port Makefile is as follows: > ------------ port Makefile ---------------- > # New ports collection makefile for: py-stl > # Date created: 28 Dec 2011 > # Whom: rsmith@xs4all.nl > # > # $FreeBSD$ >=20 > PORTNAME=3D py-stl > PORTVERSION=3D 3.1 > CATEGORIES=3D graphics python > MASTER_SITES=3D http://rsmith.home.xs4all.nl/software/ > PKGNAMEPREFIX=3D ${PYTHON_PKGNAMEPREFIX} >=20 > MAINTAINER=3D rsmith@xs4all.nl > COMMENT=3D Converts STL models to POV-Ray meshes or PostScript/PDF images >=20 > USE_ZIP=3D YES > USE_PYTHON=3D 2.5+ > USE_PYDISTUTILS=3D YES >=20 > CONFLICTS=3D stl2pov-[0-9]* >=20 > MAN1=3D stl2ps.1 stlinfo.1 >=20 > OPTIONS_DEFINE=3D PYCAIRO > PYCAIRO_DESC=3D Use (py)Cairo to enable stl2pdf >=20 > .include <bsd.port.options.mk> >=20 > .if ${PORT_OPTIONS:MPYCAIRO} > RUN_DEPENDS+=3D ${PYTHON_PKGNAMEPREFIX}cairo>1.8:${PORTSDIR}/graphics/py= -cairo > MAN1+=3D stl2pdf.1 > PLIST_SUB+=3D STL2PDF=3D"" > .else > PLIST_SUB+=3D STL2PDF=3D"@comment " > .endif >=20 > NO_BUILD=3D YES >=20 > post-install: > .if ${PORT_OPTIONS:MPYCAIRO} > @${INSTALL_MAN} ${WRKSRC}/stl2pdf.1 ${MANPREFIX}/man/man1 > @${MV} ${PREFIX}/bin/stl2pdf.py ${PREFIX}/bin/stl2pdf > .else > @${RM} -f ${PREFIX}/bin/stl2pdf.py > @${RM} -f ${MANPREFIX}/man/man1/stl2pdf.1* > .endif > @${INSTALL_MAN} ${WRKSRC}/stl2ps.1 ${MANPREFIX}/man/man1 > @${INSTALL_MAN} ${WRKSRC}/stlinfo.1 ${MANPREFIX}/man/man1 > @${MV} ${PREFIX}/bin/stl2ps.py ${PREFIX}/bin/stl2ps > @${MV} ${PREFIX}/bin/stl2pov.py ${PREFIX}/bin/stl2pov > @${MV} ${PREFIX}/bin/stlinfo.py ${PREFIX}/bin/stlinfo > @${MV} ${PYTHON_SITELIBDIR}/py_stl-${PORTVERSION}-py${PYTHON_VER}.egg-in= fo ${PYTHON_SITELIBDIR}/${PYDISTUTILS_EGGINFO} >=20 > .include <bsd.port.mk> > ------------ port Makefile ---------------- >=20 > I've looked at other ports makefiles and see no obvious defects. Help? >=20 > Roland > --=20 > R.F.Smith http://rsmith.home.xs4all.nl/ > [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated] > pgp: 1A2B 477F 9970 BA3C 2914 B7CE 1277 EFB0 C321 A725 (KeyID: C321A725) I'll have a look, and try to fix it, the best solution is to convert the po= rts to the new way. But still it is a bug, and it needs to be fixed,=20 Thanks for reporting, Bapt --n8g4imXOkfNTN/H1 Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (FreeBSD) iEYEARECAAYFAk/LujAACgkQ8kTtMUmk6EwyxgCgrgl4zTuYWC6u8uKV2eu4nd/8 EF0AnRnQ2U9UlxCREnvhN0YIKJ3MMJ1S =Upey -----END PGP SIGNATURE----- --n8g4imXOkfNTN/H1--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120603192536.GA98939>