Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 3 Jun 2012 21:25:36 +0200
From:      Baptiste Daroussin <bapt@FreeBSD.org>
To:        Roland Smith <rsmith@xs4all.nl>
Cc:        freebsd-ports@FreeBSD.org
Subject:   Re: optionsng ignores /var/db/ports/<portname>/options
Message-ID:  <20120603192536.GA98939@ithaqua.etoilebsd.net>
In-Reply-To: <20120603192023.GA8350@slackbox.erewhon.net>
References:  <20120603192023.GA8350@slackbox.erewhon.net>

next in thread | previous in thread | raw e-mail | index | archive | help

--n8g4imXOkfNTN/H1
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

On Sun, Jun 03, 2012 at 09:20:23PM +0200, Roland Smith wrote:
> [Please cc me, since I'm not subscribed to this list. I originally asked =
this
> on questions@.]
>=20
> Hi,
>=20
> With the release of the new options framework for ports, I've run into a
> problem trying to convert one of my ports.
>=20
> The nature of the problem is that the port seems to ignore the setting st=
ored
> in /var/db/ports/<portname>/options:
>=20
> I've used 'make config' to set the PYCAIRO option to on;
>=20
> slackbox# cat /var/db/ports/py27-py-stl/options
> # This file is auto-generated by 'make config'.
> # Options for py27-py-stl-3.1
> _OPTIONS_READ=3Dpy27-py-stl-3.1
> _FILE_COMPLETE_OPTIONS_LIST=3DPYCAIRO
> OPTIONS_FILE_SET+=3DPYCAIRO
>=20
> But the port seems to ignore it:
>=20
> slackbox# make showconfig
> =3D=3D=3D> The following configuration options are available for py27-py-=
stl-3.1:
>      PYCAIRO=3Doff: Use (py)Cairo to enable stl2pdf
> =3D=3D=3D> Use 'make config' to modify these settings
>=20
> slackbox# make -V PORT_OPTIONS
> DOCS EXAMPLES NLS
>=20
> Every time I do 'make config', the PYCAIRO option will be unset, even if =
it
> shows as set in /var/db/ports/<portname>/options!
>=20
> My port Makefile is as follows:
> ------------ port Makefile ----------------
> # New ports collection makefile for:    py-stl
> # Date created:                         28 Dec 2011
> # Whom:                                 rsmith@xs4all.nl
> #
> # $FreeBSD$
>=20
> PORTNAME=3D		py-stl
> PORTVERSION=3D		3.1
> CATEGORIES=3D		graphics python
> MASTER_SITES=3D		http://rsmith.home.xs4all.nl/software/
> PKGNAMEPREFIX=3D		${PYTHON_PKGNAMEPREFIX}
>=20
> MAINTAINER=3D		rsmith@xs4all.nl
> COMMENT=3D		Converts STL models to POV-Ray meshes or PostScript/PDF images
>=20
> USE_ZIP=3D		YES
> USE_PYTHON=3D		2.5+
> USE_PYDISTUTILS=3D	YES
>=20
> CONFLICTS=3D		stl2pov-[0-9]*
>=20
> MAN1=3D			stl2ps.1 stlinfo.1
>=20
> OPTIONS_DEFINE=3D	PYCAIRO
> PYCAIRO_DESC=3D	Use (py)Cairo to enable stl2pdf
>=20
> .include <bsd.port.options.mk>
>=20
> .if ${PORT_OPTIONS:MPYCAIRO}
> RUN_DEPENDS+=3D		${PYTHON_PKGNAMEPREFIX}cairo>1.8:${PORTSDIR}/graphics/py=
-cairo
> MAN1+=3D			stl2pdf.1
> PLIST_SUB+=3D		STL2PDF=3D""
> .else
> PLIST_SUB+=3D		STL2PDF=3D"@comment "
> .endif
>=20
> NO_BUILD=3D		YES
>=20
> post-install:
> .if ${PORT_OPTIONS:MPYCAIRO}
> 	@${INSTALL_MAN} ${WRKSRC}/stl2pdf.1 ${MANPREFIX}/man/man1
> 	@${MV} ${PREFIX}/bin/stl2pdf.py ${PREFIX}/bin/stl2pdf
> .else
> 	@${RM} -f ${PREFIX}/bin/stl2pdf.py
> 	@${RM} -f  ${MANPREFIX}/man/man1/stl2pdf.1*
> .endif
> 	@${INSTALL_MAN} ${WRKSRC}/stl2ps.1 ${MANPREFIX}/man/man1
> 	@${INSTALL_MAN} ${WRKSRC}/stlinfo.1 ${MANPREFIX}/man/man1
> 	@${MV} ${PREFIX}/bin/stl2ps.py  ${PREFIX}/bin/stl2ps
> 	@${MV} ${PREFIX}/bin/stl2pov.py ${PREFIX}/bin/stl2pov
> 	@${MV} ${PREFIX}/bin/stlinfo.py ${PREFIX}/bin/stlinfo
> 	@${MV} ${PYTHON_SITELIBDIR}/py_stl-${PORTVERSION}-py${PYTHON_VER}.egg-in=
fo ${PYTHON_SITELIBDIR}/${PYDISTUTILS_EGGINFO}
>=20
> .include <bsd.port.mk>
> ------------ port Makefile ----------------
>=20
> I've looked at other ports makefiles and see no obvious defects. Help?
>=20
> Roland
> --=20
> R.F.Smith                                   http://rsmith.home.xs4all.nl/
> [plain text _non-HTML_ PGP/GnuPG encrypted/signed email much appreciated]
> pgp: 1A2B 477F 9970 BA3C 2914  B7CE 1277 EFB0 C321 A725 (KeyID: C321A725)

I'll have a look, and try to fix it, the best solution is to convert the po=
rts
to the new way. But still it is a bug, and it needs to be fixed,=20

Thanks for reporting,
Bapt

--n8g4imXOkfNTN/H1
Content-Type: application/pgp-signature

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (FreeBSD)

iEYEARECAAYFAk/LujAACgkQ8kTtMUmk6EwyxgCgrgl4zTuYWC6u8uKV2eu4nd/8
EF0AnRnQ2U9UlxCREnvhN0YIKJ3MMJ1S
=Upey
-----END PGP SIGNATURE-----

--n8g4imXOkfNTN/H1--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120603192536.GA98939>