Date: Fri, 1 Oct 1999 20:54:13 +0200 (CEST) From: A.Leidinger@WJPServer.CS.Uni-SB.de To: current@freebsd.org Subject: ahc failure while updating from pre-signal-change Message-ID: <199910011854.UAA00516@work.net.local>
next in thread | raw e-mail | index | archive | help
Hi,
last cvsup: 1 Okt 18:19 GMT
I've build a new kernel and rebooted to be able to make a new world
(aktual system: pre-signal-change, around Sep 29). Right after
"Automatic reboot in progress..." I get:
---snip---
(da0:ahc0:0:0:0): have seen Data Phase. Length = 0. NumSGs = 1.
(da0:ahc0:0:0:0): data overrun detected in Data-In phase. Tag == 0xe.
/dev/rda0s1a: CANNOT READ: BLK 16
---snip---
and fsck aborts.
The "(da0:..." parts are repeated multiple times.
Booting the old kernel works and fsck says "FILESYSTEM CLEAN" (and I'm
not able to upgrade to post-signal-change).
This happens with sources cvsupped at 15:xx GMT (german mirror) to 18:19
GMT (directly from cvsup.freebsd.org).
dmesg from the working kernel:
---snip---
FreeBSD 4.0-CURRENT #6: Wed Sep 29 16:57:27 CEST 1999
root@work.net.local:/usr/src/sys/compile/WORK
Timecounter "i8254" frequency 1193182 Hz
CPU: Celeron (400.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR>
real memory = 134205440 (131060K bytes)
avail memory = 126263296 (123304K bytes)
Preloaded elf kernel "kernel.WORK" at 0xc039d000.
VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc0338f22 (1000022)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> at device 4.1 on pci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
intpm0: <Intel 82371AB Power management controller> at device 4.3 on pci0
intpm0: I/O mapped e800
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped e400
ahc0: <Adaptec aic7880 Ultra SCSI adapter> irq 9 at device 6.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ed0: <NE2000 PCI Ethernet (RealTek 8029)> irq 15 at device 10.0 on pci0
ed0: address 00:80:ad:40:bd:e7, type NE2000 (16 bit)
pci0: unknown card DPZ0001 (vendor=0x121a, dev=0x0001) at 11.0
vga-pci0: <Matrox MGA 1024SG/1064SG/1164SG graphics accelerator> irq 11 at device 12.0 on pci0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x6 on isa0
sc0: VGA <16 virtual consoles, flags=0x206>
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (wd0): <Conner Peripherals 420MB - CFS420A>
wd0: 406MB (832608 sectors), 826 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (atapi): <IOMEGA ZIP 100 ATAPI/23.D>, removable, intr, iordis
wfd0: medium type unknown (no disk)
wfd0: buggy Zip drive, 64-block transfer limit set
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x20010 on isa0
sio0: type ST16650A
sio1 at port 0x2e8-0x2ef irq 10 flags 0x20000 on isa0
sio1: type ST16650A
joy0 at port 0x201 on isa0
joy0: joystick
pca0 at port 0x40 on isa0
pca0: PC speaker audio driver
isic0 at port 0x300 irq 3 flags 0x4 on isa0
isic0: AVM A1 or AVM Fritz!Card
isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) (Addr=0x16e0)
isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0x6e0, AddrB=0xee0)
ppc0 at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
pcm0: <Vibra16X> at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled,
logging limited to 100 packets/entry by default
i4b: ISDN call control device attached
i4bisppp: 2 ISDN SyncPPP device(s) attached
i4bctl: ISDN system control port attached
i4bipr: 2 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4btel: 1 ISDN telephony interface device(s) attached
i4brbch: 2 raw B channel access device(s) attached
i4btrc: 2 ISDN trace device(s) attached
ds0 XXX: driver didn't set ifq_maxlen
IP Filter: initialized. Default = pass all, Logging = enabled
Waiting 5 seconds for SCSI devices to settle
changing root device to da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <MICROP 4743NS S168> Fixed Direct Access SCSI-2 device
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4100MB (8398656 512 byte sectors: 255H 63S/T 522C)
cd0 at ahc0 bus 0 target 1 lun 0
cd0: <TEAC CD-R55S 1.0Q> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 2 lun 0
cd1: <PIONEER CD-ROM DR-U16S 1.01> Removable CD-ROM SCSI-2 device
cd1: 20.000MB/s transfers (20.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
---snip---
If you need more information (boot -v, MYKERNEL, ...) ...
Bye,
Alexander.
--
Practice random acts of intelligence and senseless acts of self-control.
http://netchild.home.pages.de A.Leidinger+Home @ WJPServer.CS.Uni-SB.de
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199910011854.UAA00516>