Date: Wed, 05 Dec 2001 03:26:50 +0000 From: "swaggy ." <quiksilver13@hotmail.com> To: freebsd-mobile@freebsd.org Subject: Xircom CE3B-100BTX issues Message-ID: <F14598yyK5rC0nb7eIu0001d910@hotmail.com>
next in thread | raw e-mail | index | archive | help
I installed binaries (with just GENERIC kernel) of FreeBSD4.3 on my old
Thinkpad 760C and I'm having problems with the NIC. Keep getting watchdog
timeout errors and I've tried several IRQs (9,10,11 are known to work best
with this model) and still no luck. I've checked all my configs (please see
below) and can't find a reason why.
I can provide any more info if requested, please help me out here.
--------------/etc/pccard.conf :-----------------
# custom pccard.conf file
io 0x240-0x360
irq 3 10 11 15
memory 0xd0000 96k
# Xircom CreditCard Ethernet CE3-10/100
card "Xircom" "CreditCard 10/100"
config 0x1 "xe" 10
insert /etc/pccard_ether $device start
remove /etc/pccard_ether $device stop
----------output from dmesg---------------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #0: Sat Apr 21 10:54:49 GMT 2001
jkh@narf.osd.bsdi.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (90.00-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping = 5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 8388608 (8192K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> q
avail memory = 3993600 (3900K bytes)
Preloaded elf kernel "kernel" at 0xc044d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc044d09c.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
isa0: <ISA bus> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: cannot reserve I/O port range
ad0: 775MB <IBM-DSOA-20810> [1575/16/63] at ata0-master BIOSPIO
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
xe0 at port 0x240-0x24f iomem 0xd0000-0xd0fff irq 10 slot 0 on pccard0
xe0: Xircom CE3, bonding version 0x45, 100Mbps capable
xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
xe0: Ethernet address 00:80:c7:e7:5f:6e
xe0: watchdog timeout; resetting card
xe0: watchdog timeout; resetting card
----------------card dumpcis-----------------------
Code 136 not found
Code 136 not found
code Unknown ignored
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 2
000: 00 ff
Attribute memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #3, code = 0x15 (Version 1 info), length = 44
000: 05 00 58 69 72 63 6f 6d 00 43 72 65 64 69 74 43
010: 61 72 64 20 31 30 2f 31 30 30 00 43 45 33 2d 31
020: 30 2f 31 30 30 00 31 2e 30 30 00 ff
Version = 5.0, Manuf = [Xircom], card vers = [CreditCard 10/100]
Addit. info = [CE3-10/100],[1.00]
Tuple #4, code = 0x0 (Null tuple), length = 8
000: e7 5f 6e 00 00 00 00 00
Tuple #5, code = 0x20 (Manufacturer ID), length = 5
000: 05 01 0a 01 43
PCMCIA ID = 0x105, OEM ID = 0x10a
Tuple #6, code = 0x44 (Card init date), length = 4
000: 1c 69 54 25
Tuple #7, code = 0x1a (Configuration map), length = 5
000: 01 01 00 08 03
Reg len = 2, config register addr = 0x800, last config = 0x1
Registers: XX------
Tuple #8, code = 0x1b (Configuration entry), length = 25
000: c1 c1 bd 7f 55 4d 5d 3e 46 46 06 e0 17 17 e4 60
010: 00 00 0f 70 bc 8e 10 00 20
Config index = 0x1(default)
Interface byte = 0xc1 (I/O) +RDY/-BSY active, wait signal supported
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Minimum operating supply voltage: 4.5 x 1V
Maximum operating supply voltage: 5.5 x 1V
Continuous supply current: 3.5 x 100mA
Max current average over 1 second: 4 x 100mA
Max current average over 10 ms: 4 x 100mA
Power down supply current: 1 x 100mA
Wait scale Speed = 1.2 x 10 ms
RDY/BSY scale Speed = 1.2 x 10 ms
Card decodes 4 address lines, full 8/16 Bit I/O
I/O address # 1: block start = 0x0 block length = 0x10
IRQ modes: Level, Pulse
IRQs: 2 3 4 5 7 9 10 11 15
Memory space length = 0x10
Max twin cards = 0
Misc attr: (Power down supported)
Tuple #9, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #10, code = 0x22 (Functional EXT), length = 8
000: 04 06 00 80 c7 e7 5f 6e
Network node ID: 00 80 c7 e7 5f 6e
Tuple #11, code = 0x22 (Functional EXT), length = 2
000: 01 02
Network technology: Ethernet
Tuple #12, code = 0x22 (Functional EXT), length = 5
000: 02 80 96 98 00
Network speed: 10 Mb/sec
Tuple #13, code = 0x22 (Functional EXT), length = 5
000: 02 00 e1 f5 05
Network speed: 100 Mb/sec
Tuple #14, code = 0x22 (Functional EXT), length = 2
000: 03 01
Network media: UTP
Tuple #15, code = 0x22 (Functional EXT), length = 2
000: 03 03
Network media: Thin coax
Tuple #16, code = 0x22 (Functional EXT), length = 2
000: 05 00
Network connector: open connector standard
Tuple #17, code = 0xff (Terminator), length = 0
2 slots found
---------------rc.conf------------------
# -- sysinstall generated deltas -- #
# Created: Tue Nov 13 23:25:18 2001
# Enable network daemons for user convenience.
# This file now contains just the overrides from /etc/defaults/rc.conf
# please make all changes to this file.
hostname="swaggy"
inetd_enable="YES"
kern_securelevel="2"
kern_securelevel_enable="YES"
linux_enable="YES"
moused_enable="NO"
moused_type="NO"
nfs_server_enable="NO"
portmap_enable="NO"
sendmail_enable="NO"
sshd_enable="YES"
pccard_enable="YES"
pccard_mem="0xd0000"
pccard_ifconfig="inet 192.168.1.1 netmask 255.255.255.0"
pccard_conf="/etc/pccard.conf"
pccard_flags=""
pccard_beep="2"
rc_conf_files="/etc/rc.conf"
ppp_enable="NO"
Any help would be appreciated.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?F14598yyK5rC0nb7eIu0001d910>