Date: Thu, 8 Mar 2001 16:57:07 -0600 (CST) From: DEANDRADE FABIO <fandrade@falcon.cc.ukans.edu> To: aic7xxx@freebsd.org Subject: Device seemingly running at incorrect transfer rate... Message-ID: <Pine.OSF.4.10.10103081646060.22312-100000@falcon.cc.ukans.edu>
next in thread | raw e-mail | index | archive | help
I am curious if there is anyone that could help clarify to me why my 39160 Ultra 160 card seems to demonstrate a transfer rate of 160 MB/s during the boot up procedure under the adaptec bios utility and yet under Linux it shows up as 80.0 MB/s while I am using an Quantum Atlas 10K II Ultra 160 drive? I am running only this drive on channel A of the controller and I have tried the system with kernels 2.2.16, 2.2.18 and currently I am running kernel 2.4.2. The system runs pretty smoothly, but I am puzzled. Here is a copy of the /proc/aic7xxx/0 file: Adaptec AIC7xxx driver version: 5.2.1/5.2.0 Compile Options: TCQ Enabled By Default : Disabled AIC7XXX_PROC_STATS : Enabled Adapter Configuration: SCSI Adapter: Adaptec AIC-7899 Ultra 160/m SCSI host adapter Ultra-160/m LVD/SE Wide Controller Channel A at PCI 3/4/0 PCI MMAPed I/O Base: 0xd1000000 Adapter SEEPROM Config: SEEPROM found and used. Adaptec SCSI BIOS: Enabled IRQ: 15 SCBs: Active 0, Max Active 1, Allocated 31, HW 32, Page 255 Interrupts: 175581 BIOS Control Word: 0xb8f5 Adapter Control Word: 0x5c5c Extended Translation: Enabled Disconnect Enable Flags: 0xffff Ultra Enable Flags: 0x0000 Tag Queue Enable Flags: 0x0000 Ordered Queue Tag Flags: 0x0000 Default Tag Queue Depth: 8 Tagged Queue By Device array for aic7xxx host instance 0: {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255} Actual queue depth per device for aic7xxx host instance 0: {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1} Statistics: (scsi0:0:0:0) Device using Wide/Sync transfers at 80.0 MByte/sec, offset 127 Transinfo settings: current(10/127/1/0), goal(10/127/1/0), user(9/127/1/2) Total transfers 175482 (80620 reads and 94862 writes) < 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+ Reads: 16 0 64660 2023 1979 4791 1394 5757 Writes: 0 0 73467 14886 1670 827 395 3617 Also I am running the latest bios update from Adaptec for this card version 2.52.2 Thanks, Fabio To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.OSF.4.10.10103081646060.22312-100000>