From nobody Thu Oct 2 10:42:10 2025 X-Original-To: freebsd-net@mlmmj.nyi.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2610:1c1:1:606c::19:1]) by mlmmj.nyi.freebsd.org (Postfix) with ESMTP id 4ccpKJ4RBJz69ZK5 for ; Thu, 02 Oct 2025 10:42:44 +0000 (UTC) (envelope-from ccfreebsd@gmail.com) Received: from mail-yw1-f178.google.com (mail-yw1-f178.google.com [209.85.128.178]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256 client-signature RSA-PSS (2048 bits) client-digest SHA256) (Client CN "smtp.gmail.com", Issuer "WR4" (verified OK)) by mx1.freebsd.org (Postfix) with ESMTPS id 4ccpKH3tNFz3ghy for ; Thu, 02 Oct 2025 10:42:43 +0000 (UTC) (envelope-from ccfreebsd@gmail.com) Authentication-Results: mx1.freebsd.org; dkim=none; dmarc=fail reason="SPF not aligned (relaxed), No valid DKIM" header.from=freebsd.org (policy=none); spf=pass (mx1.freebsd.org: domain of ccfreebsd@gmail.com designates 209.85.128.178 as permitted sender) smtp.mailfrom=ccfreebsd@gmail.com Received: by mail-yw1-f178.google.com with SMTP id 00721157ae682-73afcab77a2so1002947b3.1 for ; Thu, 02 Oct 2025 03:42:43 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1759401762; x=1760006562; h=references:to:cc:in-reply-to:date:subject:mime-version:message-id :from:x-gm-message-state:from:to:cc:subject:date:message-id:reply-to; bh=pC83nHH12+sGAq9IP7F7OLrznpoABFqhHQMt2hM7yrU=; b=BYWXqwwRUNhuKotGCLDRx+zZktrdx63+9QE7infRZYh5TbVLC7hipr1DxfdnHkQhuZ j+d/F/GvK1bnTfP58YMmktp1eaz0ZeMxBQbR98Wih2nmRyPjfNPQTbc72/61vOl5LOtv V0yiBqaE/ZFtzbaVIsoBcUwdDyZJ+A9ecwfUQpTdGYjb7eLEEMwFwleP+4C0gVuyhCTK bXAC8kJ24pSFSG1U+Eh0KWlLTYcWharaE/JYHDNQSO3pDc/PjUJxNQ0qjtA3fZ5BwHr+ +mXzT2AVPW67JYCN+uCTf48+yfXyHSIJwHzuuvfqwajZ32ooXyVGMZ73PJANP11j2DFM QULg== X-Gm-Message-State: AOJu0YyDd/aJbfM5KXDrZ0EOYEBBIBocuZ9tF6GZmyoZMVzum+sh5X+d jEZ0TDtrG0Gt48QrOZujz2ksZoO39JpusNsTNN1VLFW2yfwNOsr1GK7U X-Gm-Gg: ASbGncvcRMCCy25SuESGeyVr0rTkmIIYG1UInL6N8BHtX6mWNYdR+gOc0mI8LgmewMK lTDA1R4AtSgfLtdOLF19mC5xdibXlHo+HVa8lqBAHicY4bLCJAeH0eOq7yTFCWsmJRn0U/cMDZJ juKzQmHozTLjJZyy8JNMhYMQrlS7GtpRvTOeWyus5AhTDvz0vgiVojIxztKZQTOWhYWzJv3JZIV QqDQTDVfi8OsvLEBzmZV32iw68jxddXxtpQz+op2Amzn4Iotx+t9F4ucuT9zbyvmrNSU0RP02Fu V82SQkV2eLm1AcDN7M8k+ewZ4Sc8nB3gKySiUiAzMxH6MgsOOayZWjmZFDlYls3OFz/qqVBScnQ 3f5ByxaQedzAnmoLyw+vXqKRFAfOb9TRIv8OgP84hoJRTK03BiKvveRMBrmQMDuftwgeIchoUM5 l+2mw1VQ== X-Google-Smtp-Source: AGHT+IGut9Bk5UtaFG9tZQlJhZsQoNXDvPhuHiaQIGiwe6QvmKTBMHy/3UJBl2idoaIQ5ZFKqoK8ow== X-Received: by 2002:a05:690c:62c4:b0:725:a4ac:19d8 with SMTP id 00721157ae682-77f6efa35c7mr56550287b3.0.1759401761391; Thu, 02 Oct 2025 03:42:41 -0700 (PDT) Received: from smtpclient.apple ([2600:1700:841:34f0:5940:9cf5:cf5c:463d]) by smtp.gmail.com with ESMTPSA id 00721157ae682-77f81e55779sm6999597b3.62.2025.10.02.03.42.40 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 02 Oct 2025 03:42:40 -0700 (PDT) From: Cheng Cui Message-Id: Content-Type: multipart/alternative; boundary="Apple-Mail=_D352B5B5-2537-4217-B686-82718FF0C254" List-Id: Networking and TCP/IP with FreeBSD List-Archive: https://lists.freebsd.org/archives/freebsd-net List-Help: List-Post: List-Subscribe: List-Unsubscribe: Sender: owner-freebsd-net@FreeBSD.org Mime-Version: 1.0 (Mac OS X Mail 16.0 \(3864.100.1.1.5\)) Subject: Re: VPP on FreeBSD Stable 14.3 Date: Thu, 2 Oct 2025 06:42:10 -0400 In-Reply-To: Cc: freebsd-net@freebsd.org, Tom Jones To: Tom Smyth References: X-Mailer: Apple Mail (2.3864.100.1.1.5) X-Spamd-Bar: / X-Spamd-Result: default: False [0.30 / 15.00]; NEURAL_SPAM_LONG(1.00)[1.000]; NEURAL_HAM_MEDIUM(-0.91)[-0.906]; MV_CASE(0.50)[]; NEURAL_HAM_SHORT(-0.39)[-0.389]; FORGED_SENDER(0.30)[cc@freebsd.org,ccfreebsd@gmail.com]; R_SPF_ALLOW(-0.20)[+ip4:209.85.128.0/17:c]; DMARC_POLICY_SOFTFAIL(0.10)[freebsd.org : SPF not aligned (relaxed), No valid DKIM,none]; MIME_GOOD(-0.10)[multipart/alternative,text/plain]; RCVD_VIA_SMTP_AUTH(0.00)[]; ARC_NA(0.00)[]; FROM_HAS_DN(0.00)[]; TO_DN_SOME(0.00)[]; MIME_TRACE(0.00)[0:+,1:+,2:~]; FREEMAIL_ENVFROM(0.00)[gmail.com]; RWL_MAILSPIKE_POSSIBLE(0.00)[209.85.128.178:from]; MID_RHS_MATCH_FROM(0.00)[]; R_DKIM_NA(0.00)[]; RCVD_COUNT_TWO(0.00)[2]; FROM_NEQ_ENVFROM(0.00)[cc@freebsd.org,ccfreebsd@gmail.com]; RCVD_IN_DNSWL_NONE(0.00)[209.85.128.178:from]; TO_MATCH_ENVRCPT_SOME(0.00)[]; RCVD_TLS_LAST(0.00)[]; PREVIOUSLY_DELIVERED(0.00)[freebsd-net@freebsd.org]; MLMMJ_DEST(0.00)[freebsd-net@freebsd.org]; RCPT_COUNT_THREE(0.00)[3] X-Rspamd-Queue-Id: 4ccpKH3tNFz3ghy --Apple-Mail=_D352B5B5-2537-4217-B686-82718FF0C254 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=us-ascii Hi Tom, May be you can try Bhyve based VM? The last time I attempted VPP in my own Bhyve based FreeBSD VM, logged = in this wiki , I remember only = ping worked. Plus some compile issues. Maybe Tom Jones can also help. > On Sep 27, 2025, at 10:40, Tom Smyth = wrote: >=20 > Folks, > I was wondering folks who run vpp on FreeBSD, > 1) when I run vpp ssh on the management nic becomes un responsive... > 2) is there a recommended freeBSD /etc/vpp/startup.conf file that > works well for FreeBSD ? >=20 > i have a virtio NIC for management >=20 > Im trying out FreeBSD with VPP inside a PRoxmox Hosted VM with Intel > IOMMU (not virtio-iommu) 8GB RAM 2 sockets 1 core, assigned to the > VM, >=20 >=20 > my /boot/loader.conf > cat /boot/loader.conf > boot_multicons=3DYES > boot_serial=3DYES > comconsole_speed=3D115200 > console=3D"comconsole,vidconsole" > contigmem_load=3D"YES" > nic_uio_load=3D"YES" > hw.contigmem.num_buffers=3D4 > hw.contigmem.buffer_size=3D1073741824 > hw.nic_uio.bdfs=3D"1:0:0,2:0:0" >=20 >=20 >=20 > dmesg output > ---<>--- > Copyright (c) 1992-2023 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 > FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git > llvmorg-19.1.7-0-gcd708029e0b2) > VT(vga): text 80x25 > CPU: Intel(R) Xeon(R) CPU E5-2430 v2 @ 2.50GHz (2494.81-MHz K8-class = CPU) > Origin=3D"GenuineIntel" Id=3D0x306e4 Family=3D0x6 Model=3D0x3e = Stepping=3D4 > = Features=3D0xf83fbff > = Features2=3D0xffbaa223 > AMD Features=3D0x2c100800 > AMD Features2=3D0x1 > Structured Extended Features=3D0x283 > Structured Extended Features2=3D0x4 > Structured Extended > Features3=3D0xbc000400 > XSAVE Features=3D0x1 > IA32_ARCH_CAPS=3D0xc000048 > AMD Extended Feature Extensions ID = EBX=3D0x100d000 > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr > Hypervisor: Origin =3D "KVMKVMKVM" > real memory =3D 8589934592 (8192 MB) > avail memory =3D 8251035648 (7868 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 2 package(s) x 1 core(s) > random: registering fast source Intel Secure Key RNG > random: fast provider: "Intel Secure Key RNG" > random: unblocking device. > ioapic0 irqs 0-23 > Launching APs: 1 > random: entropy device external interface > kbd1 at kbdmux0 > nic_uio: hw.nic_uio.bdfs =3D '1:0:0,2:0:0' > 0: virt=3D0xfffffe008ec00000 phys=3D0x140000000 > 1: virt=3D0xfffffe00cec00000 phys=3D0x180000000 > 2: virt=3D0xfffffe010ec00000 phys=3D0x1c0000000 > 3: virt=3D0xfffffe014ec00000 phys=3D0x200000000 > vtvga0: > kvmclock0: > Timecounter "kvmclock" frequency 1000000000 Hz quality 975 > kvmclock0: registered as a time-of-day clock, resolution 0.000001s > smbios0: at iomem 0xf5200-0xf521e > smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8 > aesni0: > acpi0: > acpi0: Power Button (fixed) > cpu0: on acpi0 > atrtc0: port 0x70-0x77 irq 8 on acpi0 > atrtc0: registered as a time-of-day clock, resolution 1.000000s > Event timer "RTC" frequency 32768 Hz quality 0 > hpet0: iomem 0xfed00000-0xfed003ff on = acpi0 > Timecounter "HPET" frequency 100000000 Hz quality 950 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0 > pcib0: port 0xcf8-0xcff on acpi0 > pci0: on pcib0 > vgapci0: mem > 0xfc000000-0xfcffffff,0xfea14000-0xfea14fff at device 1.0 on pci0 > vgapci0: Boot video device > uhci0: port 0x5040-0x505f irq 16 > at device 26.0 on pci0 > usbus0 on uhci0 > usbus0: 12Mbps Full Speed USB v1.0 > uhci1: port 0x5060-0x507f irq 17 > at device 26.1 on pci0 > usbus1 on uhci1 > usbus1: 12Mbps Full Speed USB v1.0 > uhci2: port 0x5080-0x509f irq 18 > at device 26.2 on pci0 > usbus2 on uhci2 > usbus2: 12Mbps Full Speed USB v1.0 > ehci0: mem > 0xfea15000-0xfea15fff irq 19 at device 26.7 on pci0 > usbus3: EHCI version 1.0 > usbus3 on ehci0 > usbus3: 480Mbps High Speed USB v2.0 > hdac0: mem 0xfea10000-0xfea13fff irq 16 > at device 27.0 on pci0 > pcib1: mem 0xfea16000-0xfea16fff irq 16 at > device 28.0 on pci0 > pci1: on pcib1 > nic_uio_probe: probed dev=3D0xfffff80003a11700 > nic_uio0: mem > 0x383800000000-0x38380000ffff,0x383800010000-0x383800013fff at device > 0.0 on pci1 > pcib2: mem 0xfea17000-0xfea17fff irq 16 at > device 28.1 on pci0 > pci2: on pcib2 > nic_uio_probe: probed dev=3D0xfffff800038ad800 > nic_uio1: mem > 0x383000000000-0x38300000ffff,0x383000010000-0x383000013fff at device > 0.0 on pci2 > pcib3: mem 0xfea18000-0xfea18fff irq 16 at > device 28.2 on pci0 > pci3: on pcib3 > pcib4: mem 0xfea19000-0xfea19fff irq 16 at > device 28.3 on pci0 > pci4: on pcib4 > uhci3: port 0x50a0-0x50bf irq 16 > at device 29.0 on pci0 > usbus4 on uhci3 > usbus4: 12Mbps Full Speed USB v1.0 > uhci4: port 0x50c0-0x50df irq 17 > at device 29.1 on pci0 > usbus5 on uhci4 > usbus5: 12Mbps Full Speed USB v1.0 > uhci5: port 0x50e0-0x50ff irq 18 > at device 29.2 on pci0 > usbus6 on uhci5 > usbus6: 12Mbps Full Speed USB v1.0 > ehci1: mem > 0xfea1a000-0xfea1afff irq 19 at device 29.7 on pci0 > usbus7: EHCI version 1.0 > usbus7 on ehci1 > usbus7: 480Mbps High Speed USB v2.0 > pcib5: at device 30.0 on pci0 > pci5: on pcib5 > pcib6: mem 0xfe000000-0xfe0000ff irq 21 at > device 1.0 on pci5 > pci6: on pcib6 > virtio_pci0: port 0x4000-0x401f > mem 0xfde40000-0xfde40fff,0x381800000000-0x381800003fff irq 23 at > device 18.0 on pci6 > vtnet0: on virtio_pci0 > vtnet0: Ethernet address: bc:24:11:2a:4f:f2 > vtnet0: netmap queues/slots: TX 1/256, RX 1/512 > 000.000121 [ 452] vtnet_netmap_attach vtnet attached txq=3D1, > txd=3D256 rxq=3D1, rxd=3D512 > pcib7: mem 0xfe001000-0xfe0010ff irq 22 at > device 2.0 on pci5 > pci7: on pcib7 > pcib8: mem 0xfe002000-0xfe0020ff irq 23 at > device 3.0 on pci5 > pci8: on pcib8 > pcib9: mem 0xfe003000-0xfe0030ff irq 20 at > device 4.0 on pci5 > pci9: on pcib9 > virtio_pci1: port 0x1000-0x103f mem > 0xfd800000-0xfd800fff,0x380000000000-0x380000003fff irq 21 at device > 1.0 on pci9 > vtscsi0: on virtio_pci1 > isab0: at device 31.0 on pci0 > isa0: on isab0 > ahci0: port 0x5100-0x511f mem > 0xfea1b000-0xfea1bfff irq 16 at device 31.2 on pci0 > ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported > ahcich0: at channel 0 on ahci0 > ahcich1: at channel 1 on ahci0 > ahcich2: at channel 2 on ahci0 > ahcich3: at channel 3 on ahci0 > ahcich4: at channel 4 on ahci0 > ahcich5: at channel 5 on ahci0 > acpi_syscontainer0: on acpi0 > vmgenc0: on acpi0 > acpi_syscontainer1: port 0xcd8-0xce3 on acpi0 > acpi_syscontainer2: port 0x620-0x62f on acpi0 > acpi_syscontainer3: port 0xcc0-0xcd7 on acpi0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on = acpi0 > uart0: console (115200,n,8,1) > atkbdc0: port 0x60,0x64 irq 1 on acpi0 > atkbd0: irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > WARNING: Device "psm" is Giant locked and may be deleted before = FreeBSD 15.0. > psm0: model IntelliMouse Explorer, device ID 4 > orm0: at iomem 0xe7800-0xeffff pnpid ORM0000 on isa0 > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff > pnpid PNP0900 on isa0 > attimer0: at port 0x40 on isa0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > attimer0: non-PNP ISA device will be removed from GENERIC in FreeBSD = 15. > Timecounters tick every 10.000 msec > Trying to mount root from ufs:/dev/da0s1a [rw]... > ugen6.1: at usbus6 > ugen7.1: at usbus7 > uhub0 on usbus6 > uhub0: on = usbus6 > uhub1 on usbus7 > uhub1: on = usbus7 > ugen3.1: at usbus3 > ugen5.1: at usbus5 > uhub2 on usbus3 > uhub2: on = usbus3 > uhub3 on usbus5 > uhub3: on = usbus5 > ugen4.1: at usbus4 > ugen1.1: at usbus1 > uhub4 on usbus4 > uhub4: on = usbus4 > ugen2.1: at usbus2 > uhub5 on usbus1 > uhub6 on usbus2 > uhub6: on = usbus2 > uhub5: on = usbus1 > ugen0.1: at usbus0 > uhub7 on usbus0 > uhub7: on = usbus0 > da0 at vtscsi0 bus 0 scbus0 target 0 lun 0 > da0: Fixed Direct Access SPC-3 SCSI device > da0: 300.000MB/s transfers > da0: Command Queueing enabled > da0: 16384MB (33554432 512 byte sectors) > cd0 at ahcich1 bus 0 scbus2 target 0 lun 0 > cd0: Removable CD-ROM SCSI device > cd0: Serial Number QM00003 > cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO = 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not = present > uhub0: 2 ports with 2 removable, self powered > uhub5: 2 ports with 2 removable, self powered > uhub7: 2 ports with 2 removable, self powered > uhub4: 2 ports with 2 removable, self powered > uhub6: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > Root mount waiting for: usbus3 usbus7 > Root mount waiting for: usbus3 usbus7 > uhub1: 6 ports with 6 removable, self powered > uhub2: 6 ports with 6 removable, self powered > WARNING: / was not properly dismounted > Dual Console: Serial Primary, Video Secondary > ichsmb0: port 0x700-0x73f irq > 16 at device 31.3 on pci0 > smbus0: on ichsmb0 > lo0: link state changed to UP > vtnet0: link state changed to UP > nic_uio0: Bar 0 @ 383800000000, size 10000 > nic_uio0: Bar 3 @ 383800010000, size 4000 > nic_uio1: Bar 0 @ 383000000000, size 10000 > nic_uio1: Bar 3 @ 383000010000, size 4000 > nic_uio0: Bar 0 @ 383800000000, size 10000 > nic_uio0: Bar 3 @ 383800010000, size 4000 > nic_uio1: Bar 0 @ 383000000000, size 10000 > nic_uio1: Bar 3 @ 383000010000, size 4000 > Waiting (max 60 seconds) for system process `vnlru' to stop... done > Waiting (max 60 seconds) for system process `syncer' to stop... > Syncing disks, vnodes remaining... 2 0 0 done > All buffers synced. > Uptime: 28m16s > uhub1: detached > uhub0: detached > uhub3: detached > uhub4: detached > uhub2: detached > uhub6: detached > uhub5: detached > uhub7: detached > ---<>--- > Copyright (c) 1992-2023 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64 > FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git > llvmorg-19.1.7-0-gcd708029e0b2) > VT(vga): text 80x25 > CPU: Intel(R) Xeon(R) CPU E5-2430 v2 @ 2.50GHz (2494.22-MHz K8-class = CPU) > Origin=3D"GenuineIntel" Id=3D0x306e4 Family=3D0x6 Model=3D0x3e = Stepping=3D4 > = Features=3D0xf83fbff > = Features2=3D0xffbaa223 > AMD Features=3D0x2c100800 > AMD Features2=3D0x1 > Structured Extended Features=3D0x283 > Structured Extended Features2=3D0x4 > Structured Extended > Features3=3D0xbc000400 > XSAVE Features=3D0x1 > IA32_ARCH_CAPS=3D0xc000048 > AMD Extended Feature Extensions ID = EBX=3D0x100d000 > VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr > Hypervisor: Origin =3D "KVMKVMKVM" > real memory =3D 8589934592 (8192 MB) > avail memory =3D 8251035648 (7868 MB) > Event timer "LAPIC" quality 600 > ACPI APIC Table: > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 2 package(s) x 1 core(s) > random: registering fast source Intel Secure Key RNG > random: fast provider: "Intel Secure Key RNG" > random: unblocking device. > ioapic0 irqs 0-23 > Launching APs: 1 > random: entropy device external interface > kbd1 at kbdmux0 > nic_uio: hw.nic_uio.bdfs =3D '1:0:0,2:0:0' > 0: virt=3D0xfffffe008ec00000 phys=3D0x140000000 > 1: virt=3D0xfffffe00cec00000 phys=3D0x180000000 > 2: virt=3D0xfffffe010ec00000 phys=3D0x1c0000000 > 3: virt=3D0xfffffe014ec00000 phys=3D0x200000000 > vtvga0: > kvmclock0: > Timecounter "kvmclock" frequency 1000000000 Hz quality 975 > kvmclock0: registered as a time-of-day clock, resolution 0.000001s > smbios0: at iomem 0xf5200-0xf521e > smbios0: Entry point: v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8 > aesni0: > acpi0: > acpi0: Power Button (fixed) > cpu0: on acpi0 > atrtc0: port 0x70-0x77 irq 8 on acpi0 > atrtc0: registered as a time-of-day clock, resolution 1.000000s > Event timer "RTC" frequency 32768 Hz quality 0 > hpet0: iomem 0xfed00000-0xfed003ff on = acpi0 > Timecounter "HPET" frequency 100000000 Hz quality 950 > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b on acpi0 > pcib0: port 0xcf8-0xcff on acpi0 > pci0: on pcib0 > vgapci0: mem > 0xfc000000-0xfcffffff,0xfea14000-0xfea14fff at device 1.0 on pci0 > vgapci0: Boot video device > uhci0: port 0x5040-0x505f irq 16 > at device 26.0 on pci0 > usbus0 on uhci0 > usbus0: 12Mbps Full Speed USB v1.0 > uhci1: port 0x5060-0x507f irq 17 > at device 26.1 on pci0 > usbus1 on uhci1 > usbus1: 12Mbps Full Speed USB v1.0 > uhci2: port 0x5080-0x509f irq 18 > at device 26.2 on pci0 > usbus2 on uhci2 > usbus2: 12Mbps Full Speed USB v1.0 > ehci0: mem > 0xfea15000-0xfea15fff irq 19 at device 26.7 on pci0 > usbus3: EHCI version 1.0 > usbus3 on ehci0 > usbus3: 480Mbps High Speed USB v2.0 > hdac0: mem 0xfea10000-0xfea13fff irq 16 > at device 27.0 on pci0 > pcib1: mem 0xfea16000-0xfea16fff irq 16 at > device 28.0 on pci0 > pci1: on pcib1 > nic_uio_probe: probed dev=3D0xfffff80003a0f700 > nic_uio0: mem > 0x383800000000-0x38380000ffff,0x383800010000-0x383800013fff at device > 0.0 on pci1 > pcib2: mem 0xfea17000-0xfea17fff irq 16 at > device 28.1 on pci0 > pci2: on pcib2 > nic_uio_probe: probed dev=3D0xfffff800037b0800 > nic_uio1: mem > 0x383000000000-0x38300000ffff,0x383000010000-0x383000013fff at device > 0.0 on pci2 > pcib3: mem 0xfea18000-0xfea18fff irq 16 at > device 28.2 on pci0 > pci3: on pcib3 > pcib4: mem 0xfea19000-0xfea19fff irq 16 at > device 28.3 on pci0 > pci4: on pcib4 > uhci3: port 0x50a0-0x50bf irq 16 > at device 29.0 on pci0 > usbus4 on uhci3 > usbus4: 12Mbps Full Speed USB v1.0 > uhci4: port 0x50c0-0x50df irq 17 > at device 29.1 on pci0 > usbus5 on uhci4 > usbus5: 12Mbps Full Speed USB v1.0 > uhci5: port 0x50e0-0x50ff irq 18 > at device 29.2 on pci0 > usbus6 on uhci5 > usbus6: 12Mbps Full Speed USB v1.0 > ehci1: mem > 0xfea1a000-0xfea1afff irq 19 at device 29.7 on pci0 > usbus7: EHCI version 1.0 > usbus7 on ehci1 > usbus7: 480Mbps High Speed USB v2.0 > pcib5: at device 30.0 on pci0 > pci5: on pcib5 > pcib6: mem 0xfe000000-0xfe0000ff irq 21 at > device 1.0 on pci5 > pci6: on pcib6 > virtio_pci0: port 0x4000-0x401f > mem 0xfde40000-0xfde40fff,0x381800000000-0x381800003fff irq 23 at > device 18.0 on pci6 > vtnet0: on virtio_pci0 > vtnet0: Ethernet address: bc:24:11:2a:4f:f2 > vtnet0: netmap queues/slots: TX 1/256, RX 1/512 > 000.000121 [ 452] vtnet_netmap_attach vtnet attached txq=3D1, > txd=3D256 rxq=3D1, rxd=3D512 > pcib7: mem 0xfe001000-0xfe0010ff irq 22 at > device 2.0 on pci5 > pci7: on pcib7 > pcib8: mem 0xfe002000-0xfe0020ff irq 23 at > device 3.0 on pci5 > pci8: on pcib8 > pcib9: mem 0xfe003000-0xfe0030ff irq 20 at > device 4.0 on pci5 > pci9: on pcib9 > virtio_pci1: port 0x1000-0x103f mem > 0xfd800000-0xfd800fff,0x380000000000-0x380000003fff irq 21 at device > 1.0 on pci9 > vtscsi0: on virtio_pci1 > isab0: at device 31.0 on pci0 > isa0: on isab0 > ahci0: port 0x5100-0x511f mem > 0xfea1b000-0xfea1bfff irq 16 at device 31.2 on pci0 > ahci0: AHCI v1.00 with 6 1.5Gbps ports, Port Multiplier not supported > ahcich0: at channel 0 on ahci0 > ahcich1: at channel 1 on ahci0 > ahcich2: at channel 2 on ahci0 > ahcich3: at channel 3 on ahci0 > ahcich4: at channel 4 on ahci0 > ahcich5: at channel 5 on ahci0 > acpi_syscontainer0: on acpi0 > vmgenc0: on acpi0 > acpi_syscontainer1: port 0xcd8-0xce3 on acpi0 > acpi_syscontainer2: port 0x620-0x62f on acpi0 > acpi_syscontainer3: port 0xcc0-0xcd7 on acpi0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on = acpi0 > uart0: console (115200,n,8,1) > atkbdc0: port 0x60,0x64 irq 1 on acpi0 > atkbd0: irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > WARNING: Device "psm" is Giant locked and may be deleted before = FreeBSD 15.0. > psm0: model IntelliMouse Explorer, device ID 4 > orm0: at iomem 0xe7800-0xeffff pnpid ORM0000 on isa0 > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff > pnpid PNP0900 on isa0 > attimer0: at port 0x40 on isa0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > attimer0: non-PNP ISA device will be removed from GENERIC in FreeBSD = 15. > Timecounters tick every 10.000 msec > Trying to mount root from ufs:/dev/da0s1a [rw]... > ugen7.1: at usbus7 > ugen6.1: at usbus6 > uhub0 on usbus7 > uhub1 on usbus6 > uhub1: on = usbus6 > ugen4.1: at usbus4 > uhub0: on = usbus7 > uhub2 on usbus4 > uhub2: on = usbus4 > ugen5.1: at usbus5 > ugen2.1: at usbus2 > uhub3 on usbus5 > uhub3: on = usbus5 > ugen3.1: at usbus3 > uhub4 on usbus2 > uhub5 on usbus3 > uhub5: on = usbus3 > uhub4: on = usbus2 > ugen0.1: at usbus0 > ugen1.1: at usbus1 > uhub6 on usbus0 > uhub7 on usbus1 > uhub7: on = usbus1 > uhub6: on = usbus0 > da0 at vtscsi0 bus 0 scbus0 target 0 lun 0 > da0: Fixed Direct Access SPC-3 SCSI device > da0: 300.000MB/s transfers > da0: Command Queueing enabled > da0: 16384MB (33554432 512 byte sectors) > cd0 at ahcich1 bus 0 scbus2 target 0 lun 0 > cd0: Removable CD-ROM SCSI device > cd0: Serial Number QM00003 > cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO = 8192bytes) > cd0: Attempt to query device size failed: NOT READY, Medium not = present > uhub6: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub7: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > uhub4: 2 ports with 2 removable, self powered > Root mount waiting for: usbus3 usbus7 > Root mount waiting for: usbus3 usbus7 > uhub0: 6 ports with 6 removable, self powered > uhub5: 6 ports with 6 removable, self powered > Dual Console: Serial Primary, Video Secondary > ichsmb0: port 0x700-0x73f irq > 16 at device 31.3 on pci0 > smbus0: on ichsmb0 > lo0: link state changed to UP > vtnet0: link state changed to UP >=20 Best Regards, Cheng Cui --Apple-Mail=_D352B5B5-2537-4217-B686-82718FF0C254 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=us-ascii Hi Tom,

May be you = can try Bhyve based VM?

The last time I = attempted VPP in my own Bhyve based FreeBSD VM, logged in this wiki, I remember only = ping worked. Plus some compile issues.

Maybe Tom Jones = can also help.

On = Sep 27, 2025, at 10:40, Tom Smyth <tom.smyth@wirelessconnect.eu> = wrote:

Folks,
I = was wondering folks who run vpp on FreeBSD,
1) when I run vpp =  ssh on the management nic becomes un responsive...
2) is there = a recommended freeBSD /etc/vpp/startup.conf file =   that
works well for FreeBSD ?

i have a virtio NIC = for management

Im trying out FreeBSD with VPP inside a PRoxmox = Hosted VM with  Intel
IOMMU (not virtio-iommu) =    8GB RAM 2 sockets 1 core,  assigned to = the
VM,


my /boot/loader.conf
cat = /boot/loader.conf
boot_multicons=3DYES
boot_serial=3DYES
comconso= le_speed=3D115200
console=3D"comconsole,vidconsole"
contigmem_load=3D= "YES"
nic_uio_load=3D"YES"
hw.contigmem.num_buffers=3D4
hw.contig= mem.buffer_size=3D1073741824
hw.nic_uio.bdfs=3D"1:0:0,2:0:0"


dmesg output
---<<BOOT>>---
Copyright (c) = 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, = 1988, 1989, 1991, 1992, 1993, 1994
=        The Regents of the University = of California. All rights reserved.
FreeBSD is a registered trademark = of The FreeBSD Foundation.
FreeBSD 14.3-RELEASE = releng/14.3-n271432-8c9ce319fef7 GENERIC amd64
FreeBSD clang version = 19.1.7 = (https://github.com/llvm/llvm-project.git
llvmorg-19.1.7-0-gcd708029e0b= 2)
VT(vga): text 80x25
CPU: Intel(R) Xeon(R) CPU E5-2430 v2 @ = 2.50GHz (2494.81-MHz K8-class CPU)
 Origin=3D"GenuineIntel" =  Id=3D0x306e4  Family=3D0x6  Model=3D0x3e =  Stepping=3D4
=  Features=3D0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,= MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
=  Features2=3D0xffbaa223<SSE3,PCLMULQDQ,VMX,SSSE3,CX16,PDCM,PCID,SS= E4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>= ;
 AMD = Features=3D0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
 AMD = Features2=3D0x1<LAHF>
 Structured Extended = Features=3D0x283<FSGSBASE,TSCADJ,SMEP,ERMS>
 Structured = Extended Features2=3D0x4<UMIP>
 Structured = Extended
Features3=3D0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,S= SBD>
 XSAVE Features=3D0x1<XSAVEOPT>
=  IA32_ARCH_CAPS=3D0xc000048<SKIP_L1DFL_VME>
 AMD = Extended Feature Extensions ID = EBX=3D0x100d000<IBPB,IBRS,STIBP,SSBD>
 VT-x: = PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
Hypervisor: Origin =3D = "KVMKVMKVM"
real memory  =3D 8589934592 (8192 MB)
avail = memory =3D 8251035648 (7868 MB)
Event timer "LAPIC" quality = 600
ACPI APIC Table: <BOCHS  BXPC =    >
FreeBSD/SMP: Multiprocessor System Detected: 2 = CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
random: registering = fast source Intel Secure Key RNG
random: fast provider: "Intel Secure = Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> = irqs 0-23
Launching APs: 1
random: entropy device external = interface
kbd1 at kbdmux0
nic_uio: hw.nic_uio.bdfs =3D = '1:0:0,2:0:0'
0: virt=3D0xfffffe008ec00000 phys=3D0x140000000
1: = virt=3D0xfffffe00cec00000 phys=3D0x180000000
2: = virt=3D0xfffffe010ec00000 phys=3D0x1c0000000
3: = virt=3D0xfffffe014ec00000 phys=3D0x200000000
vtvga0: <VT VGA = driver>
kvmclock0: <KVM paravirtual clock>
Timecounter = "kvmclock" frequency 1000000000 Hz quality 975
kvmclock0: registered = as a time-of-day clock, resolution 0.000001s
smbios0: <System = Management BIOS> at iomem 0xf5200-0xf521e
smbios0: Entry point: = v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8
aesni0: = <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <BOCHS = BXPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on = acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on = acpi0
atrtc0: registered as a time-of-day clock, resolution = 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: = <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on = acpi0
Timecounter "HPET" frequency 100000000 Hz quality = 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality = 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b = on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on = acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: = <VGA-compatible display> = mem
0xfc000000-0xfcffffff,0xfea14000-0xfea14fff at device 1.0 on = pci0
vgapci0: Boot video device
uhci0: <Intel 82801I (ICH9) USB = controller> port 0x5040-0x505f irq 16
at device 26.0 on = pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: = <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq = 17
at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full = Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port = 0x5080-0x509f irq 18
at device 26.2 on pci0
usbus2 on = uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I = (ICH9) USB 2.0 controller> mem
0xfea15000-0xfea15fff irq 19 at = device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on = ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801I = HDA Controller> mem 0xfea10000-0xfea13fff irq 16
at device 27.0 on = pci0
pcib1: <ACPI PCI-PCI bridge> mem 0xfea16000-0xfea16fff irq = 16 at
device 28.0 on pci0
pci1: <ACPI PCI bus> on = pcib1
nic_uio_probe: probed dev=3D0xfffff80003a11700
nic_uio0: = <DPDK PCI Device> = mem
0x383800000000-0x38380000ffff,0x383800010000-0x383800013fff at = device
0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> mem = 0xfea17000-0xfea17fff irq 16 at
device 28.1 on pci0
pci2: <ACPI = PCI bus> on pcib2
nic_uio_probe: probed = dev=3D0xfffff800038ad800
nic_uio1: <DPDK PCI Device> = mem
0x383000000000-0x38300000ffff,0x383000010000-0x383000013fff at = device
0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> mem = 0xfea18000-0xfea18fff irq 16 at
device 28.2 on pci0
pci3: <ACPI = PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> mem = 0xfea19000-0xfea19fff irq 16 at
device 28.3 on pci0
pci4: <ACPI = PCI bus> on pcib4
uhci3: <Intel 82801I (ICH9) USB = controller> port 0x50a0-0x50bf irq 16
at device 29.0 on = pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: = <Intel 82801I (ICH9) USB controller> port 0x50c0-0x50df irq = 17
at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full = Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port = 0x50e0-0x50ff irq 18
at device 29.2 on pci0
usbus6 on = uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I = (ICH9) USB 2.0 controller> mem
0xfea1a000-0xfea1afff irq 19 at = device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on = ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI = bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on = pcib5
pcib6: <ACPI PCI-PCI bridge> mem 0xfe000000-0xfe0000ff = irq 21 at
device 1.0 on pci5
pci6: <ACPI PCI bus> on = pcib6
virtio_pci0: <VirtIO PCI (legacy) Network adapter> port = 0x4000-0x401f
mem 0xfde40000-0xfde40fff,0x381800000000-0x381800003fff = irq 23 at
device 18.0 on pci6
vtnet0: <VirtIO Networking = Adapter> on virtio_pci0
vtnet0: Ethernet address: = bc:24:11:2a:4f:f2
vtnet0: netmap queues/slots: TX 1/256, RX = 1/512
000.000121 [ 452] vtnet_netmap_attach =       vtnet attached txq=3D1,
txd=3D256 = rxq=3D1, rxd=3D512
pcib7: <ACPI PCI-PCI bridge> mem = 0xfe001000-0xfe0010ff irq 22 at
device 2.0 on pci5
pci7: <ACPI = PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> mem = 0xfe002000-0xfe0020ff irq 23 at
device 3.0 on pci5
pci8: <ACPI = PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> mem = 0xfe003000-0xfe0030ff irq 20 at
device 4.0 on pci5
pci9: <ACPI = PCI bus> on pcib9
virtio_pci1: <VirtIO PCI (legacy) SCSI = adapter> port 0x1000-0x103f = mem
0xfd800000-0xfd800fff,0x380000000000-0x380000003fff irq 21 at = device
1.0 on pci9
vtscsi0: <VirtIO SCSI Adapter> on = virtio_pci1
isab0: <PCI-ISA bridge> at device 31.0 on = pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI = SATA controller> port 0x5100-0x511f mem
0xfea1b000-0xfea1bfff irq = 16 at device 31.2 on pci0
ahci0: AHCI v1.00 with 6 1.5Gbps ports, = Port Multiplier not supported
ahcich0: <AHCI channel> at = channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on = ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: = <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI = channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at = channel 5 on ahci0
acpi_syscontainer0: <System Container> on = acpi0
vmgenc0: <VM Generation Counter> on = acpi0
acpi_syscontainer1: <System Container> port 0xcd8-0xce3 = on acpi0
acpi_syscontainer2: <System Container> port = 0x620-0x62f on acpi0
acpi_syscontainer3: <System Container> = port 0xcc0-0xcd7 on acpi0
uart0: <16550 or compatible> port = 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console = (115200,n,8,1)
atkbdc0: <Keyboard controller (i8042)> port = 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on = atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 = Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device = "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: = model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROM> = at iomem 0xe7800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA = VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
pnpid PNP0900 on = isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter = "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency = 1193182 Hz quality 100
attimer0: non-PNP ISA device will be removed = from GENERIC in FreeBSD 15.
Timecounters tick every 10.000 = msec
Trying to mount root from ufs:/dev/da0s1a [rw]...
ugen6.1: = <Intel UHCI root HUB> at usbus6
ugen7.1: <Intel EHCI root = HUB> at usbus7
uhub0 on usbus6
uhub0: <Intel UHCI root HUB, = class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub1 on = usbus7
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr = 1> on usbus7
ugen3.1: <Intel EHCI root HUB> at = usbus3
ugen5.1: <Intel UHCI root HUB> at usbus5
uhub2 on = usbus3
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr = 1> on usbus3
uhub3 on usbus5
uhub3: <Intel UHCI root HUB, = class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen4.1: <Intel = UHCI root HUB> at usbus4
ugen1.1: <Intel UHCI root HUB> at = usbus1
uhub4 on usbus4
uhub4: <Intel UHCI root HUB, class 9/0, = rev 1.00/1.00, addr 1> on usbus4
ugen2.1: <Intel UHCI root = HUB> at usbus2
uhub5 on usbus1
uhub6 on usbus2
uhub6: = <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on = usbus2
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr = 1> on usbus1
ugen0.1: <Intel UHCI root HUB> at = usbus0
uhub7 on usbus0
uhub7: <Intel UHCI root HUB, class 9/0, = rev 1.00/1.00, addr 1> on usbus0
da0 at vtscsi0 bus 0 scbus0 = target 0 lun 0
da0: <QEMU QEMU HARDDISK 2.5+> Fixed Direct = Access SPC-3 SCSI device
da0: 300.000MB/s transfers
da0: Command = Queueing enabled
da0: 16384MB (33554432 512 byte sectors)
cd0 at = ahcich1 bus 0 scbus2 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM = 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number = QM00003
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, = PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, = Medium not present
uhub0: 2 ports with 2 removable, self = powered
uhub5: 2 ports with 2 removable, self powered
uhub7: 2 = ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, = self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: = 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 = usbus7
Root mount waiting for: usbus3 usbus7
uhub1: 6 ports with 6 = removable, self powered
uhub2: 6 ports with 6 removable, self = powered
WARNING: / was not properly dismounted
Dual Console: = Serial Primary, Video Secondary
ichsmb0: <Intel 82801I (ICH9) = SMBus controller> port 0x700-0x73f irq
16 at device 31.3 on = pci0
smbus0: <System Management Bus> on ichsmb0
lo0: link = state changed to UP
vtnet0: link state changed to UP
nic_uio0: Bar = 0 @ 383800000000, size 10000
nic_uio0: Bar 3 @ 383800010000, size = 4000
nic_uio1: Bar 0 @ 383000000000, size 10000
nic_uio1: Bar 3 @ = 383000010000, size 4000
nic_uio0: Bar 0 @ 383800000000, size = 10000
nic_uio0: Bar 3 @ 383800010000, size 4000
nic_uio1: Bar 0 @ = 383000000000, size 10000
nic_uio1: Bar 3 @ 383000010000, size = 4000
Waiting (max 60 seconds) for system process `vnlru' to stop... = done
Waiting (max 60 seconds) for system process `syncer' to = stop...
Syncing disks, vnodes remaining... 2 0 0 done
All buffers = synced.
Uptime: 28m16s
uhub1: detached
uhub0: = detached
uhub3: detached
uhub4: detached
uhub2: = detached
uhub6: detached
uhub5: detached
uhub7: = detached
---<<BOOT>>---
Copyright (c) 1992-2023 The = FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, = 1991, 1992, 1993, 1994
       The = Regents of the University of California. All rights reserved.
FreeBSD = is a registered trademark of The FreeBSD Foundation.
FreeBSD = 14.3-RELEASE releng/14.3-n271432-8c9ce319fef7 GENERIC amd64
FreeBSD = clang version 19.1.7 = (https://github.com/llvm/llvm-project.git
llvmorg-19.1.7-0-gcd708029e0b= 2)
VT(vga): text 80x25
CPU: Intel(R) Xeon(R) CPU E5-2430 v2 @ = 2.50GHz (2494.22-MHz K8-class CPU)
 Origin=3D"GenuineIntel" =  Id=3D0x306e4  Family=3D0x6  Model=3D0x3e =  Stepping=3D4
=  Features=3D0xf83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,= MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS>
=  Features2=3D0xffbaa223<SSE3,PCLMULQDQ,VMX,SSSE3,CX16,PDCM,PCID,SS= E4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>= ;
 AMD = Features=3D0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
 AMD = Features2=3D0x1<LAHF>
 Structured Extended = Features=3D0x283<FSGSBASE,TSCADJ,SMEP,ERMS>
 Structured = Extended Features2=3D0x4<UMIP>
 Structured = Extended
Features3=3D0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,S= SBD>
 XSAVE Features=3D0x1<XSAVEOPT>
=  IA32_ARCH_CAPS=3D0xc000048<SKIP_L1DFL_VME>
 AMD = Extended Feature Extensions ID = EBX=3D0x100d000<IBPB,IBRS,STIBP,SSBD>
 VT-x: = PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
Hypervisor: Origin =3D = "KVMKVMKVM"
real memory  =3D 8589934592 (8192 MB)
avail = memory =3D 8251035648 (7868 MB)
Event timer "LAPIC" quality = 600
ACPI APIC Table: <BOCHS  BXPC =    >
FreeBSD/SMP: Multiprocessor System Detected: 2 = CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
random: registering = fast source Intel Secure Key RNG
random: fast provider: "Intel Secure = Key RNG"
random: unblocking device.
ioapic0 <Version 2.0> = irqs 0-23
Launching APs: 1
random: entropy device external = interface
kbd1 at kbdmux0
nic_uio: hw.nic_uio.bdfs =3D = '1:0:0,2:0:0'
0: virt=3D0xfffffe008ec00000 phys=3D0x140000000
1: = virt=3D0xfffffe00cec00000 phys=3D0x180000000
2: = virt=3D0xfffffe010ec00000 phys=3D0x1c0000000
3: = virt=3D0xfffffe014ec00000 phys=3D0x200000000
vtvga0: <VT VGA = driver>
kvmclock0: <KVM paravirtual clock>
Timecounter = "kvmclock" frequency 1000000000 Hz quality 975
kvmclock0: registered = as a time-of-day clock, resolution 0.000001s
smbios0: <System = Management BIOS> at iomem 0xf5200-0xf521e
smbios0: Entry point: = v2.1 (32-bit), Version: 2.8, BCD Revision: 2.8
aesni0: = <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS>
acpi0: <BOCHS = BXPC>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on = acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on = acpi0
atrtc0: registered as a time-of-day clock, resolution = 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: = <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on = acpi0
Timecounter "HPET" frequency 100000000 Hz quality = 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality = 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x608-0x60b = on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on = acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: = <VGA-compatible display> = mem
0xfc000000-0xfcffffff,0xfea14000-0xfea14fff at device 1.0 on = pci0
vgapci0: Boot video device
uhci0: <Intel 82801I (ICH9) USB = controller> port 0x5040-0x505f irq 16
at device 26.0 on = pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: = <Intel 82801I (ICH9) USB controller> port 0x5060-0x507f irq = 17
at device 26.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full = Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port = 0x5080-0x509f irq 18
at device 26.2 on pci0
usbus2 on = uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I = (ICH9) USB 2.0 controller> mem
0xfea15000-0xfea15fff irq 19 at = device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on = ehci0
usbus3: 480Mbps High Speed USB v2.0
hdac0: <Intel 82801I = HDA Controller> mem 0xfea10000-0xfea13fff irq 16
at device 27.0 on = pci0
pcib1: <ACPI PCI-PCI bridge> mem 0xfea16000-0xfea16fff irq = 16 at
device 28.0 on pci0
pci1: <ACPI PCI bus> on = pcib1
nic_uio_probe: probed dev=3D0xfffff80003a0f700
nic_uio0: = <DPDK PCI Device> = mem
0x383800000000-0x38380000ffff,0x383800010000-0x383800013fff at = device
0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> mem = 0xfea17000-0xfea17fff irq 16 at
device 28.1 on pci0
pci2: <ACPI = PCI bus> on pcib2
nic_uio_probe: probed = dev=3D0xfffff800037b0800
nic_uio1: <DPDK PCI Device> = mem
0x383000000000-0x38300000ffff,0x383000010000-0x383000013fff at = device
0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> mem = 0xfea18000-0xfea18fff irq 16 at
device 28.2 on pci0
pci3: <ACPI = PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> mem = 0xfea19000-0xfea19fff irq 16 at
device 28.3 on pci0
pci4: <ACPI = PCI bus> on pcib4
uhci3: <Intel 82801I (ICH9) USB = controller> port 0x50a0-0x50bf irq 16
at device 29.0 on = pci0
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: = <Intel 82801I (ICH9) USB controller> port 0x50c0-0x50df irq = 17
at device 29.1 on pci0
usbus5 on uhci4
usbus5: 12Mbps Full = Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port = 0x50e0-0x50ff irq 18
at device 29.2 on pci0
usbus6 on = uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I = (ICH9) USB 2.0 controller> mem
0xfea1a000-0xfea1afff irq 19 at = device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on = ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI = bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on = pcib5
pcib6: <ACPI PCI-PCI bridge> mem 0xfe000000-0xfe0000ff = irq 21 at
device 1.0 on pci5
pci6: <ACPI PCI bus> on = pcib6
virtio_pci0: <VirtIO PCI (legacy) Network adapter> port = 0x4000-0x401f
mem 0xfde40000-0xfde40fff,0x381800000000-0x381800003fff = irq 23 at
device 18.0 on pci6
vtnet0: <VirtIO Networking = Adapter> on virtio_pci0
vtnet0: Ethernet address: = bc:24:11:2a:4f:f2
vtnet0: netmap queues/slots: TX 1/256, RX = 1/512
000.000121 [ 452] vtnet_netmap_attach =       vtnet attached txq=3D1,
txd=3D256 = rxq=3D1, rxd=3D512
pcib7: <ACPI PCI-PCI bridge> mem = 0xfe001000-0xfe0010ff irq 22 at
device 2.0 on pci5
pci7: <ACPI = PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> mem = 0xfe002000-0xfe0020ff irq 23 at
device 3.0 on pci5
pci8: <ACPI = PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> mem = 0xfe003000-0xfe0030ff irq 20 at
device 4.0 on pci5
pci9: <ACPI = PCI bus> on pcib9
virtio_pci1: <VirtIO PCI (legacy) SCSI = adapter> port 0x1000-0x103f = mem
0xfd800000-0xfd800fff,0x380000000000-0x380000003fff irq 21 at = device
1.0 on pci9
vtscsi0: <VirtIO SCSI Adapter> on = virtio_pci1
isab0: <PCI-ISA bridge> at device 31.0 on = pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI = SATA controller> port 0x5100-0x511f mem
0xfea1b000-0xfea1bfff irq = 16 at device 31.2 on pci0
ahci0: AHCI v1.00 with 6 1.5Gbps ports, = Port Multiplier not supported
ahcich0: <AHCI channel> at = channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on = ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: = <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI = channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at = channel 5 on ahci0
acpi_syscontainer0: <System Container> on = acpi0
vmgenc0: <VM Generation Counter> on = acpi0
acpi_syscontainer1: <System Container> port 0xcd8-0xce3 = on acpi0
acpi_syscontainer2: <System Container> port = 0x620-0x62f on acpi0
acpi_syscontainer3: <System Container> = port 0xcc0-0xcd7 on acpi0
uart0: <16550 or compatible> port = 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console = (115200,n,8,1)
atkbdc0: <Keyboard controller (i8042)> port = 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on = atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 = Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
WARNING: Device = "psm" is Giant locked and may be deleted before FreeBSD 15.0.
psm0: = model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROM> = at iomem 0xe7800-0xeffff pnpid ORM0000 on isa0
vga0: <Generic ISA = VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff
pnpid PNP0900 on = isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter = "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency = 1193182 Hz quality 100
attimer0: non-PNP ISA device will be removed = from GENERIC in FreeBSD 15.
Timecounters tick every 10.000 = msec
Trying to mount root from ufs:/dev/da0s1a [rw]...
ugen7.1: = <Intel EHCI root HUB> at usbus7
ugen6.1: <Intel UHCI root = HUB> at usbus6
uhub0 on usbus7
uhub1 on usbus6
uhub1: = <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on = usbus6
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub0: = <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on = usbus7
uhub2 on usbus4
uhub2: <Intel UHCI root HUB, class 9/0, = rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel UHCI root = HUB> at usbus5
ugen2.1: <Intel UHCI root HUB> at = usbus2
uhub3 on usbus5
uhub3: <Intel UHCI root HUB, class 9/0, = rev 1.00/1.00, addr 1> on usbus5
ugen3.1: <Intel EHCI root = HUB> at usbus3
uhub4 on usbus2
uhub5 on usbus3
uhub5: = <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on = usbus3
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr = 1> on usbus2
ugen0.1: <Intel UHCI root HUB> at = usbus0
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub6 on = usbus0
uhub7 on usbus1
uhub7: <Intel UHCI root HUB, class 9/0, = rev 1.00/1.00, addr 1> on usbus1
uhub6: <Intel UHCI root HUB, = class 9/0, rev 1.00/1.00, addr 1> on usbus0
da0 at vtscsi0 bus 0 = scbus0 target 0 lun 0
da0: <QEMU QEMU HARDDISK 2.5+> Fixed = Direct Access SPC-3 SCSI device
da0: 300.000MB/s transfers
da0: = Command Queueing enabled
da0: 16384MB (33554432 512 byte = sectors)
cd0 at ahcich1 bus 0 scbus2 target 0 lun 0
cd0: <QEMU = QEMU DVD-ROM 2.5+> Removable CD-ROM SCSI device
cd0: Serial Number = QM00003
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, = PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, = Medium not present
uhub6: 2 ports with 2 removable, self = powered
uhub1: 2 ports with 2 removable, self powered
uhub7: 2 = ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, = self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: = 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 = usbus7
Root mount waiting for: usbus3 usbus7
uhub0: 6 ports with 6 = removable, self powered
uhub5: 6 ports with 6 removable, self = powered
Dual Console: Serial Primary, Video Secondary
ichsmb0: = <Intel 82801I (ICH9) SMBus controller> port 0x700-0x73f irq
16 = at device 31.3 on pci0
smbus0: <System Management Bus> on = ichsmb0
lo0: link state changed to UP
vtnet0: link state changed = to UP


Best Regards,
Cheng Cui



= --Apple-Mail=_D352B5B5-2537-4217-B686-82718FF0C254--