Date: Sun, 23 Aug 2020 03:42:47 +0700 From: Budi Janto <budijanto@studiokaraoke.co.id> To: Dimitry Andric <dim@FreeBSD.org>, FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org> Subject: Re: FreeBSD buildworld problem. Message-ID: <cacf5e88-0c91-6252-7810-2026b5159d3d@studiokaraoke.co.id> In-Reply-To: <1F8206D4-9B84-4E1B-B48C-0FDFE20280B8@FreeBSD.org> References: <7579fc3e-8051-6af9-d7db-f773519a00db@studiokaraoke.co.id> <3FC3D87E-18A9-4B25-83FF-90197EB2A3A9@FreeBSD.org> <b0a2e6ea-471c-0e23-8b54-b3d7265833e3@studiokaraoke.co.id> <1F8206D4-9B84-4E1B-B48C-0FDFE20280B8@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is an OpenPGP/MIME signed message (RFC 4880 and 3156)
--sx6LSsN1c6E7bEMg1ajEGSKIqJJwVLvCO
Content-Type: multipart/mixed; boundary="pPvFjI7acyB2YOMfuGIS1719rGdyfP7e5"
--pPvFjI7acyB2YOMfuGIS1719rGdyfP7e5
Content-Type: multipart/mixed;
boundary="------------BA7311C0A0A6F983920E3A86"
Content-Language: en-US
This is a multi-part message in MIME format.
--------------BA7311C0A0A6F983920E3A86
Content-Type: text/plain; charset=windows-1252
Content-Transfer-Encoding: quoted-printable
On 8/23/20 2:17 AM, Dimitry Andric wrote:
> Hmm, I have tried with a lot of different clang 10.x builds, but I can'=
t
> get it to crash with your reproduction files.
Yes, this is a strange problem. This machine already running FreeBSD
since 1 years ago, used for production. Every first month, I always
build from source. This machine running ZFS with striped RAID
configuration & system using UFS (SSD), daily serve about 40 clients
with Samba.
> Could your crash maybe be caused by out-of-memory conditions, or some
> sort of hardware problem?
I don't know exactly for hardware problem (Could be). Maybe, for CPU
resources low usage enough.
# sysctl -a | grep hw.ncpu
hw.ncpu: 4
# sysctl -a | grep 'hw.*mem'
hw.physmem: 16989356032
hw.usermem: 16527396864
hw.realmem: 17179869184
hw.pci.host_mem_start: 2147483648
hw.cbb.start_memory: 2281701376
# top -b
last pid: 88448; load averages: 3.99, 3.93, 3.70 up 0+00:42:03
03:34:27
54 processes: 5 running, 49 sleeping
CPU 0: 80.0% user, 0.0% nice, 3.3% system, 0.0% interrupt, 16.6% idle
CPU 1: 80.0% user, 0.0% nice, 3.4% system, 0.0% interrupt, 16.6% idle
CPU 2: 79.5% user, 0.0% nice, 3.5% system, 0.1% interrupt, 16.9% idle
CPU 3: 80.1% user, 0.0% nice, 3.3% system, 0.0% interrupt, 16.6% idle
Mem: 795M Active, 4799M Inact, 2868M Wired, 1548M Buf, 7346M Free
ARC: 507M Total, 104M MFU, 252M MRU, 32K Anon, 3663K Header, 147M Other
50M Compressed, 311M Uncompressed, 6.28:1 Ratio
Swap: 3881M Total, 3881M Free
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU
COMMAND
88439 root 1 87 0 246M 236M CPU2 2 0:07 52.49% c+=
+
88441 root 1 85 0 277M 268M RUN 1 0:06 46.09% c+=
+
88445 root 1 83 0 301M 289M CPU3 3 0:05 38.18% c+=
+
88447 root 1 78 0 204M 193M CPU0 0 0:03 22.75% c+=
+
88446 root 1 52 0 12M 3036K wait 0 0:00 0.10% sh=
88444 root 1 52 0 12M 3036K wait 3 0:00 0.10% sh=
[...]
> Does it occur every time in the same file?
> And have you seen any messages in dmesg or the system logs saying
> "kernel: swap_pager_getswapspace(number): failed" ?
Two times, `make -j4 buildworld` always failed with simmilar file &
stderr output. So, I do remove /usr/src/* & /usr/obj/*, afterward I do
`svnlite checkout` & `make -j4 buildworld` and get different file & msg
(I already give to you). Now, I try to `make -j4 buildworld` again and I
hope will successful. Thank you.
--=20
Regards,
Budi Janto
--------------BA7311C0A0A6F983920E3A86
Content-Type: text/plain; charset=UTF-8;
name="dmesg.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="dmesg.txt"
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-STABLE r359271 GENERIC amd64
FreeBSD clang version 9.0.1 (git@github.com:llvm/llvm-project.git c1a0a21=
3378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (3192.67-MHz K8-class CPU)
Origin=3D"GenuineIntel" Id=3D0x306c3 Family=3D0x6 Model=3D0x3c Step=
ping=3D3
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSS=
E3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,=
AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=3D0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=3D0x21<LAHF,ABM>
Structured Extended Features=3D0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BM=
I2,ERMS,INVPCID,NFPUSG>
XSAVE Features=3D0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory =3D 17179869184 (16384 MB)
avail memory =3D 16483217408 (15719 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 2 1 3
Timecounter "TSC-low" frequency 1596337353 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81118130, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7b=
fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7f10000-0xf7f13fff irq 16 at=
device 3.0 on pci0
xhci0: <Intel Wildcat Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff=
irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Wildcat Point USB 2.0 controller USB-B> mem 0xf7f17000-0xf7=
f173ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe=
000-0xe0ff mem 0xf7e00000-0xf7e00fff,0xf0200000-0xf0203fff irq 18 at devi=
ce 0.0 on pci2
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100bas=
eTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000bas=
eT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: fc:aa:14:ec:81:a8
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
re1: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xd000-0xd0ff mem =
0xf7d10000-0xf7d10fff,0xf0100000-0xf0103fff irq 18 at device 0.0 on pci5
re1: Using 1 MSI-X message
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus=
1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100bas=
eTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, =
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto=
, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 58:d5:6e:40:14:3c
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci6: <ACPI PCI bus> on pcib6
re2: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xc000-0xc0ff mem =
0xf7c10000-0xf7c10fff,0xf0000000-0xf0003fff irq 19 at device 0.0 on pci6
re2: Using 1 MSI-X message
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: <MII bus> on re2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus=
2
rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100bas=
eTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, =
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto=
, auto-flow
re2: Using defaults for TSO: 65518/35/2048
re2: Ethernet address: 58:d5:6e:40:14:3b
re2: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Wildcat Point USB 2.0 controller USB-A> mem 0xf7f16000-0xf7=
f163ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Wildcat Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0=
a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f15000-0xf7f1=
57ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff pnpid OR=
M0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
Trying to mount root from ufs:/dev/ada0p2 [rw]...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0=
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ADATA SU650 P180831a> ACS-2 ATA SATA 3.x device
ada0: Serial Number 2I4820084938
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST4000VN008-2DR166 SC60> ACS-3 ATA SATA 3.x device
ada1: Serial Number WDH25ESL
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 3815447MB (7814037168 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <ST4000VN008-2DR166 SC60> ACS-3 ATA SATA 3.x device
ada2: Serial Number ZGY3WLSZ
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 3815447MB (7814037168 512 byte sectors)
ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0
ses0: pass2,ada2 in 'Slot 02', SATA Slot: scbus2 target 0
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 21 ports with 21 removable, self powered
Root mount waiting for: usbus1 usbus2
ugen1.2: <vendor 0x8087 product 0x8009> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> o=
n usbus1
ugen2.2: <vendor 0x8087 product 0x8001> at usbus2
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> o=
n usbus2
Root mount waiting for: usbus1 usbus2
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
mountroot: waiting for device /dev/ada0p2...
WARNING: / was not properly dismounted
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lo0: link state changed to UP
re0: link state changed to DOWN
re1: link state changed to DOWN
re2: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
re1: link state changed to UP
lagg0: link state changed to UP
re2: link state changed to UP
re1: link state changed to DOWN
re2: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to DOWN
re0: link state changed to UP
re1: link state changed to UP
lagg0: link state changed to UP
re2: link state changed to UP
tun0: link state changed to UP
tun0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...=20
Syncing disks, vnodes remaining... 3 1 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... =
done
All buffers synced.
Uptime: 3d6h11m42s
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-STABLE r359271 GENERIC amd64
FreeBSD clang version 9.0.1 (git@github.com:llvm/llvm-project.git c1a0a21=
3378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (3192.68-MHz K8-class CPU)
Origin=3D"GenuineIntel" Id=3D0x306c3 Family=3D0x6 Model=3D0x3c Step=
ping=3D3
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSS=
E3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,=
AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=3D0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=3D0x21<LAHF,ABM>
Structured Extended Features=3D0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BM=
I2,ERMS,INVPCID,NFPUSG>
XSAVE Features=3D0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory =3D 17179869184 (16384 MB)
avail memory =3D 16483217408 (15719 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 2 1 3
Timecounter "TSC-low" frequency 1596339015 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81118130, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7b=
fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7f10000-0xf7f13fff irq 16 at=
device 3.0 on pci0
xhci0: <Intel Wildcat Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff=
irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Wildcat Point USB 2.0 controller USB-B> mem 0xf7f17000-0xf7=
f173ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe=
000-0xe0ff mem 0xf7e00000-0xf7e00fff,0xf0200000-0xf0203fff irq 18 at devi=
ce 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100bas=
eTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000bas=
eT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: fc:aa:14:ec:81:a8
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
re1: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xd000-0xd0ff mem =
0xf7d10000-0xf7d10fff,0xf0100000-0xf0103fff irq 18 at device 0.0 on pci5
re1: Using 1 MSI-X message
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus=
1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100bas=
eTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, =
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto=
, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 58:d5:6e:40:14:3c
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci6: <ACPI PCI bus> on pcib6
re2: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xc000-0xc0ff mem =
0xf7c10000-0xf7c10fff,0xf0000000-0xf0003fff irq 19 at device 0.0 on pci6
re2: Using 1 MSI-X message
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: <MII bus> on re2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus=
2
rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100bas=
eTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, =
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto=
, auto-flow
re2: Using defaults for TSO: 65518/35/2048
re2: Ethernet address: 58:d5:6e:40:14:3b
re2: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Wildcat Point USB 2.0 controller USB-A> mem 0xf7f16000-0xf7=
f163ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Wildcat Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0=
a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f15000-0xf7f1=
57ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff pnpid OR=
M0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Trying to mount root from ufs:/dev/ada0p2 [rw]...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0=
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ADATA SU650 P180831a> ACS-2 ATA SATA 3.x device
ada0: Serial Number 2I4820084938
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST4000VN008-2DR166 SC60> ACS-3 ATA SATA 3.x device
ada1: Serial Number WDH25ESL
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 3815447MB (7814037168 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <ST4000VN008-2DR166 SC60> ACS-3 ATA SATA 3.x device
ada2: Serial Number ZGY3WLSZ
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 3815447MB (7814037168 512 byte sectors)
ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0
ses0: pass2,ada2 in 'Slot 02', SATA Slot: scbus2 target 0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 21 ports with 21 removable, self powered
Root mount waiting for: usbus1 usbus2
ugen2.2: <vendor 0x8087 product 0x8001> at usbus2
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> o=
n usbus2
ugen1.2: <vendor 0x8087 product 0x8009> at usbus1
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> o=
n usbus1
Root mount waiting for: usbus1 usbus2
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
mountroot: waiting for device /dev/ada0p2...
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lo0: link state changed to UP
re0: link state changed to DOWN
re1: link state changed to DOWN
re2: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
re1: link state changed to UP
lagg0: link state changed to UP
re2: link state changed to UP
tun0: link state changed to UP
tun0: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...=20
Syncing disks, vnodes remaining... 2 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... =
done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... =
done
All buffers synced.
Uptime: 9h46m50s
---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-STABLE r359271 GENERIC amd64
FreeBSD clang version 9.0.1 (git@github.com:llvm/llvm-project.git c1a0a21=
3378a458fbea1a5c77b315c7dce08fd05) (based on LLVM 9.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Core(TM) i5-4460 CPU @ 3.20GHz (3192.67-MHz K8-class CPU)
Origin=3D"GenuineIntel" Id=3D0x306c3 Family=3D0x6 Model=3D0x3c Step=
ping=3D3
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,=
PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=3D0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSS=
E3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,=
AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=3D0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=3D0x21<LAHF,ABM>
Structured Extended Features=3D0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BM=
I2,ERMS,INVPCID,NFPUSG>
XSAVE Features=3D0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory =3D 17179869184 (16384 MB)
avail memory =3D 16483217408 (15719 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 2 1 3
Timecounter "TSC-low" frequency 1596335384 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81118130, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7b=
fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel Haswell HDA Controller> mem 0xf7f10000-0xf7f13fff irq 16 at=
device 3.0 on pci0
xhci0: <Intel Wildcat Point USB 3.0 controller> mem 0xf7f00000-0xf7f0ffff=
irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Port routing mask set to 0xffffffff
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Wildcat Point USB 2.0 controller USB-B> mem 0xf7f17000-0xf7=
f173ff irq 16 at device 26.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe=
000-0xe0ff mem 0xf7e00000-0xf7e00fff,0xf0200000-0xf0203fff irq 18 at devi=
ce 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100bas=
eTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000bas=
eT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: fc:aa:14:ec:81:a8
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
pci5: <ACPI PCI bus> on pcib5
re1: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xd000-0xd0ff mem =
0xf7d10000-0xf7d10fff,0xf0100000-0xf0103fff irq 18 at device 0.0 on pci5
re1: Using 1 MSI-X message
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus=
1
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100bas=
eTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, =
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto=
, auto-flow
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 58:d5:6e:40:14:3c
re1: netmap queues/slots: TX 1/256, RX 1/256
pcib6: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
pci6: <ACPI PCI bus> on pcib6
re2: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xc000-0xc0ff mem =
0xf7c10000-0xf7c10fff,0xf0000000-0xf0003fff irq 19 at device 0.0 on pci6
re2: Using 1 MSI-X message
re2: Chip rev. 0x2c000000
re2: MAC rev. 0x00200000
miibus2: <MII bus> on re2
rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus=
2
rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100bas=
eTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, =
1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto=
, auto-flow
re2: Using defaults for TSO: 65518/35/2048
re2: Ethernet address: 58:d5:6e:40:14:3b
re2: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Wildcat Point USB 2.0 controller USB-A> mem 0xf7f16000-0xf7=
f163ff irq 23 at device 29.0 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Wildcat Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0=
a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f15000-0xf7f1=
57ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff pnpid OR=
M0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0
hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0
pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen0.1: <0x8086 XHCI root HUB> at usbus0
Trying to mount root from ufs:/dev/ada0p2 [rw]...
Root mount waiting for: usbus0 usbus1 usbus2 CAM
uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0=
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ses0 at ahciem0 bus 0 scbus3 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ADATA SU650 P180831a> ACS-2 ATA SATA 3.x device
ada0: Serial Number 2I4820084938
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST4000VN008-2DR166 SC60> ACS-3 ATA SATA 3.x device
ada1: Serial Number WDH25ESL
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 3815447MB (7814037168 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
ses0: pass1,ada1 in 'Slot 01', SATA Slot: scbus1 target 0
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <ST4000VN008-2DR166 SC60> ACS-3 ATA SATA 3.x device
ada2: Serial Number ZGY3WLSZ
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 3815447MB (7814037168 512 byte sectors)
ses0: pass2,ada2 in 'Slot 02', SATA Slot: scbus2 target 0
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub2: 21 ports with 21 removable, self powered
Root mount waiting for: usbus1 usbus2
ugen2.2: <vendor 0x8087 product 0x8001> at usbus2
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x8001, class 9/0, rev 2.00/0.00, addr 2> o=
n usbus2
ugen1.2: <vendor 0x8087 product 0x8009> at usbus1
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8009, class 9/0, rev 2.00/0.00, addr 2> o=
n usbus1
Root mount waiting for: usbus1 usbus2
uhub4: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
mountroot: waiting for device /dev/ada0p2...
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
lo0: link state changed to UP
re0: link state changed to DOWN
re1: link state changed to DOWN
re2: link state changed to DOWN
lagg0: link state changed to DOWN
re0: link state changed to UP
re1: link state changed to UP
lagg0: link state changed to UP
re2: link state changed to UP
tun0: link state changed to UP
--------------BA7311C0A0A6F983920E3A86--
--pPvFjI7acyB2YOMfuGIS1719rGdyfP7e5--
--sx6LSsN1c6E7bEMg1ajEGSKIqJJwVLvCO
Content-Type: application/pgp-signature; name="signature.asc"
Content-Description: OpenPGP digital signature
Content-Disposition: attachment; filename="signature.asc"
-----BEGIN PGP SIGNATURE-----
iF0EARECAB0WIQSgWiaMPNSrvdnrEeH2TEtOYmlTBAUCX0GDRwAKCRD2TEtOYmlT
BCCeAJ0TwpiAiUdXHxjSqJty/w6svOfetgCeO5Hd1YNd3E80sWC+IgTvC2f60TQ=
=qbLD
-----END PGP SIGNATURE-----
--sx6LSsN1c6E7bEMg1ajEGSKIqJJwVLvCO--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?cacf5e88-0c91-6252-7810-2026b5159d3d>