Date: Tue, 3 Apr 2001 11:29:53 -0700 (PDT) From: Rick Duvall <maillist@coastsight.com> To: Weldon S Godfrey 3 <weldon@excelsus.com>, freebsd-questions@freebsd.org Subject: Re: dmesg/parity error, tape backup hangs machine Message-ID: <Pine.BSF.4.21.0104031128220.30370-100000@ns1.coastsight.com> In-Reply-To: <Pine.BSF.4.21.0104031030570.30370-100000@ns1.coastsight.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Ahhh.... Okay, my bad... I just pulled the cover off the case and found that my LVD/160 cable had been frayed from when I put the cover back on the case the last time. I thought I was going to have to buy a new cable, but my supervisor pulled out his pocket knife and cut that part of the cable off, and I used one of the other connectors. Whoops! Sorry for the trouble, but thanks for your help... Sincerely, Rick Duvall On Tue, 3 Apr 2001, Rick Duvall wrote: > That's what I thought! But, then I started thinking that it worked before > with no error. All I did was reinstall freebsd (to 4.2 release, was > 4.2stable) and recompile the kernel. > > Here is a copy of my kernel config: > > # > # GENERIC -- Generic kernel configuration file for FreeBSD/i386 > # > # For more information on this file, please read the handbook section on > # Kernel Configuration Files: > # > # http://www.FreeBSD.org/handbook/kernelconfig-config.html > # > # The handbook is also available locally in /usr/share/doc/handbook > # if you've installed the doc distribution, otherwise always see the > # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the > # latest information. > # > # An exhaustive list of options and more detailed explanations of the > # device lines is also present in the ./LINT configuration file. If you > are > # in doubt as to the purpose or necessity of a line, check first in LINT. > # > # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.21 2001/01/12 23:45:14 > scottl Exp $ > > machine i386 > #cpu I386_CPU > #cpu I486_CPU > cpu I586_CPU > #cpu I686_CPU > ident HARDENED > maxusers 32 > > #makeoptions DEBUG=-g #Build kernel with gdb(1) debug > symbols > > options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > #options INET6 #IPv6 communications protocols > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep > this!] > options SOFTUPDATES #Enable FFS soft updates support > options MFS #Memory Filesystem > options MD_ROOT #MD is a potential root device > #options NFS #Network Filesystem > #options NFS_ROOT #NFS usable as root device, NFS > required > #options MSDOSFS #MSDOS Filesystem > options CD9660 #ISO 9660 Filesystem > options CD9660_ROOT #CD-ROM usable as root, CD9660 > required > options PROCFS #Process filesystem > options COMPAT_43 #Compatible with BSD 4.3 [KEEP > THIS!] > options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI > #options UCONSOLE #Allow users to grab the console > #options USERCONFIG #boot -c editor > #options VISUAL_USERCONFIG #visual boot -c editor > options KTRACE #ktrace(1) support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options P1003_1B #Posix P1003_1B real-time > extensions > options _KPOSIX_PRIORITY_SCHEDULING > options ICMP_BANDLIM #Rate limit bad replies > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > > # To make an SMP kernel, the next two are needed > #options SMP # Symmetric MultiProcessor Kernel > #options APIC_IO # Symmetric (APIC) I/O > > device isa > device eisa > device pci > > # Floppy drives > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > device fd0 at fdc0 drive 0 > device fd1 at fdc0 drive 1 > > # ATA and ATAPI devices > device ata0 at isa? port IO_WD1 irq 14 > device ata1 at isa? port IO_WD2 irq 15 > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > device atapist # ATAPI tape drives > options ATA_STATIC_ID #Static device numbering > #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices > > # SCSI Controllers > device ahb # EISA AHA1742 family > device ahc # AHA2940 and onboard AIC7xxx devices > device amd # AMD 53C974 (Teckram DC-390(T)) > device isp # Qlogic family > device ncr # NCR/Symbios Logic > device sym # NCR/Symbios Logic (newer chipsets) > options SYM_SETUP_LP_PROBE_MAP=0x40 > # Allow ncr to attach legacy NCR devices > when > # both sym and ncr are configured > > device adv0 at isa? > device adw > device bt0 at isa? > device aha0 at isa? > device aic0 at isa? > > device ncv # NCR 53C500 > device nsp # Workbit Ninja SCSI-3 > device stg # TMC 18C30/18C50 > > # SCSI peripherals > device scbus # SCSI bus (required) > device da # Direct Access (disks) > device sa # Sequential Access (tape etc) > device cd # CD > device pass # Passthrough device (direct SCSI access) > > # RAID controllers interfaced to the SCSI subsystem > #device asr # DPT SmartRAID V, VI and Adaptec SCSI > RAID > #device dpt # DPT Smartcache - See LINT for options! > #device mly # Mylex AcceleRAID/eXtremeRAID > > # RAID controllers > #device aac # Adaptec FSA RAID, Dell PERC2/PERC3 > #device ida # Compaq Smart RAID > #device amr # AMI MegaRAID > #device mlx # Mylex DAC960 family > #device twe # 3ware Escalade > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc0 at isa? port IO_KBD > device atkbd0 at atkbdc? irq 1 flags 0x1 > #device psm0 at atkbdc? irq 12 > > device vga0 at isa? > > # splash screen/screen saver > #pseudo-device splash > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? flags 0x100 > > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > #device vt0 at isa? > #options XSERVER # support for X server on a vt > console > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT > lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > # Floating point support - do not disable. > device npx0 at nexus? port IO_NPX irq 13 > > # Power management support (see LINT for more options) > #device apm0 at nexus? disable flags 0x20 # Advanced Power > Management > > # PCCARD (PCMCIA) support > #device card > #device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000 > #device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable > > # Serial (COM) ports > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > device sio1 at isa? port IO_COM2 irq 3 > device sio2 at isa? disable port IO_COM3 irq 5 > device sio3 at isa? disable port IO_COM4 irq 9 > > # Parallel port > device ppc0 at isa? irq 7 > device ppbus # Parallel port bus (required) > device lpt # Printer > device plip # TCP/IP over parallel > device ppi # Parallel port interface device > #device vpo # Requires scbus and da > > > # PCI Ethernet NICs. > device de # DEC/Intel DC21x4x (``Tulip'') > device fxp # Intel EtherExpress PRO/100B (82557, > 82558) > device tx # SMC 9432TX (83c170 ``EPIC'') > device vx # 3Com 3c590, 3c595 (``Vortex'') > device wx # Intel Gigabit Ethernet Card > (``Wiseman'') > > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to use these > NICs! > device miibus # MII bus support > device dc # DEC/Intel 21143 and various workalikes > device pcn # AMD Am79C79x PCI 10/100 NICs > device rl # RealTek 8129/8139 > device sf # Adaptec AIC-6915 (``Starfire'') > device sis # Silicon Integrated Systems SiS 900/SiS > 7016 > device ste # Sundance ST201 (D-Link DFE-550TX) > device tl # Texas Instruments ThunderLAN > device vr # VIA Rhine, Rhine II > device wb # Winbond W89C840F > device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > # ISA Ethernet NICs. > #device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 > #device ex > #device ep > #device fe0 at isa? port 0x300 > # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really > # exists only as a PCMCIA device, so there is no ISA attatement needed > # and resources will always be dynamically assigned by the pccard code. > #device wi > # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will > # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP > # mode (the factory default). If you set the switches on your ISA > # card for a manually chosen I/O address and IRQ, you must specify > # those paremeters here. > #device an > # Xircom Ethernet > #device xe > # The probe order of these is presently determined by > i386/isa/isa_compat.c. > #device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 > #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 > #device lnc0 at isa? port 0x280 irq 10 drq 0 > #device cs0 at isa? port 0x300 > #device sn0 at isa? port 0x300 irq 10 > > # Pseudo devices - the number indicates how many units to allocated. > pseudo-device loop # Network loopback > pseudo-device ether # Ethernet support > #pseudo-device sl 1 # Kernel SLIP > #pseudo-device ppp 1 # Kernel PPP > #pseudo-device tun # Packet tunnel. > pseudo-device pty # Pseudo-ttys (telnet etc) > pseudo-device md # Memory "disks" > #pseudo-device gif 4 # IPv6 and IPv4 tunneling > #pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) > > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > #pseudo-device bpf #Berkeley packet filter > > # USB support > #device uhci # UHCI PCI->USB interface > #device ohci # OHCI PCI->USB interface > #device usb # USB Bus (required) > #device ugen # Generic > #device uhid # "Human Interface Devices" > #device ukbd # Keyboard > #device ulpt # Printer > #device umass # Disks/Mass storage - Requires scbus and > da > #device ums # Mouse > #device uscanner # Scanners > # USB Ethernet, requires mii > #device aue # ADMtek USB ethernet > #device cue # CATC USB ethernet > #device kue # Kawasaki LSI USB ethernet > options IPFIREWALL #firewall > options IPFIREWALL_VERBOSE #print information about > options IPFILTER #ipfilter support > options IPFILTER_LOG #ipfilter logging > options IPSTEALTH #support for stealth forwarding > > On Tue, 3 Apr 2001, Weldon S Godfrey 3 wrote: > > > > > Bad cable/terminiation? > > > > > > On Tue, 3 Apr 2001, Rick Duvall wrote: > > > > > Hi, > > > > > > I tried to do a tape backup and my machine hangs. so I looked at dmesg > > > and see the following error: (bear with me, it's long). Let me know if > > > you need a copy of my kernel config... > > > > > > Waiting 15 seconds for SCSI devices to settle > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:1): INQUIRY. CDB: 12 20 0 0 24 0 > > > (probe0:ahc0:0:0:1): ABORTED COMMAND asc:48,0 > > > (probe0:ahc0:0:0:1): Initiator detected error message received > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:2): INQUIRY. CDB: 12 40 0 0 24 0 > > > (probe0:ahc0:0:0:2): ABORTED COMMAND asc:48,0 > > > (probe0:ahc0:0:0:2): Initiator detected error message received > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:3): INQUIRY. CDB: 12 60 0 0 24 0 > > > (probe0:ahc0:0:0:3): ABORTED COMMAND asc:48,0 > > > (probe0:ahc0:0:0:3): Initiator detected error message received > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:4): INQUIRY. CDB: 12 80 0 0 24 0 > > > (probe0:ahc0:0:0:4): ABORTED COMMAND asc:48,0 > > > (probe0:ahc0:0:0:4): Initiator detected error message received > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:5): INQUIRY. CDB: 12 a0 0 0 24 0 > > > (probe0:ahc0:0:0:5): ABORTED COMMAND asc:48,0 > > > (probe0:ahc0:0:0:5): Initiator detected error message received > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:6): INQUIRY. CDB: 12 c0 0 0 24 0 > > > (probe0:ahc0:0:0:6): ABORTED COMMAND asc:48,0 > > > (probe0:ahc0:0:0:6): Initiator detected error message received > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x19f) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x6c) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): parity error detected in Data-in > > > phase. SEQADDR(0x146) SCSIRATE(0x95) > > > (probe0:ahc0:0:0:7): INQUIRY. CDB: 12 e0 0 0 24 0 > > > (probe0:ahc0:0:0:7): ABORTED COMMAND asc:48,0 > > > (probe0:ahc0:0:0:7): Initiator detected error message received > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0104031128220.30370-100000>