Date: Tue, 22 Mar 2005 08:43:01 -0800 From: Julian Elischer <julian@elischer.org> To: John Mok <jmok@attglobal.net> Cc: Roman Kurakin <rik@cronyx.ru> Subject: Re: HOWTO connect MCI using Netgraph + Frame Relay with Digi SYNC/570i Message-ID: <42404B15.5040605@elischer.org> In-Reply-To: <4240497D.5030304@attglobal.net> References: <42344AF7.6070701@attglobal.net> <423C72A1.7060000@cronyx.ru> <4240497D.5030304@attglobal.net>
next in thread | previous in thread | raw e-mail | index | archive | help
John Mok wrote: > Dear Roman, > > Thank you for your information. I have succeeded to setup the frame > relay using netgraph. However, I failed to get the interface ng0 up :- > > #ifconfig ng0 1.2.3.4 255.255.255.0 up > ifconfig: interface ng0 does not exist > > Please help to advise how I could make the interface ng0 appears. > > Thank you, John Mok > > Roman Kurakin wrote: > >> In case you still need this information. >> >> John Mok: >> >>> Hi, >>> >>> I would like to replace the existing Cisco router 1600 and connect to >>> MCI Hong Kong with FeeBSD 5.3 box with a Digi SYNC 570 serial card. >>> With reference of the FreeBSD handbook and the information from >>> Julian Elischer at >>> >>> http://www.elischer.org/netgraph/ >>> >>> I have compiled the kernel with the following options :- >>> >>> .... >>> options NETGRAPH >>> options NETGRAPH_FRAME_RELAY >>> options NETGRAPH_LMI >>> .... >>> device ar >>> >>> The dmesg showed that the device ARNET/Digi SYNC/570i was loaded >>> successfully. However, when I tried to config. with the following, >>> the ngctl prompt with the error: >>> >>> #ngctl mkpeer ar0: frame_relay rawdata downstream >>> #ngctl mkpeer ar0:rawdata lmi dlci500 ansi >> >> >> >> ngctl mkpeer ar0:rawdata lmi dlci0 annexD >> >> also you need NETGRAPH_RFC1490 >> >> ngctl mkpeer ar0:rawdata rfc1490 dlci500 downstream >> ngctl mkpeer ar0:rawdata.dlci500 iface inet inet did the last command do anything? please show the output of: ifconfig ngctl list >> >> and you will get smth like ng0 >> >> >> Best regards, >> Roman Kurakin >> >>> >>> ngctl: send msg: No such file or directory >>> >>> I tried the testing with MCI connection disconnected. How do I set >>> the line speed to 1536 Kbps? I hope someone could help me how to >>> config. the netgraph with work with Digi SYNC/570i >>> >>> Thanks a lot. >>> >>> John Mok >>> >>> >>> _______________________________________________ >>> freebsd-net@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-net >>> To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org" >> >> >> >> >> >> > > _______________________________________________ > freebsd-net@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-net > To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?42404B15.5040605>