Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 17 Jan 1999 15:22:30 -0500
From:      Mike Tancsa <mike@sentex.net>
To:        questions@FreeBSD.ORG
Subject:   SCSI question
Message-ID:  <3.0.5.32.19990117152230.03aee110@granite.sentex.ca>

next in thread | raw e-mail | index | archive | help

Any idea what this message would mean ?

2.2.8-STABLE system using an ASUS 875 controller...
Jan 17 15:02:33 flint /kernel: ncr0 <ncr 53c875 fast20 wide scsi> rev 3 int
a irq 9 on
Jan 17 15:02:33 flint /kernel: pci0:10:0
Jan 17 15:02:33 flint /kernel: ncr0 waiting for scsi devices to settle
Jan 17 15:02:33 flint /kernel: (ncr0:0:0): "QUANTUM VIKING II 9.1WLS 4110"
type 0 fixed SCSI 2
Jan 17 15:02:33 flint /kernel: sd0(ncr0:0:0): Direct-Access
Jan 17 15:02:33 flint /kernel: sd0(ncr0:0:0): WIDE SCSI (16 bit) enabled
Jan 17 15:02:33 flint /kernel: sd0(ncr0:0:0): 40.0 MB/s (50 ns, offset 16)
Jan 17 15:02:33 flint /kernel: 8709MB (17836668 512 byte sectors)
Jan 17 15:02:33 flint /kernel: (ncr0:1:0): "QUANTUM FIREBALL SE8.4S PJ0A"
type 0 fixed SCSI 2
Jan 17 15:02:33 flint /kernel: sd1(ncr0:1:0): Direct-Access
Jan 17 15:02:33 flint /kernel: sd1(ncr0:1:0): 20.0 MB/s (50 ns, offset 15)
Jan 17 15:02:33 flint /kernel: 8191MB (16777215 512 byte sectors)



Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19f9000.
Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19fac00.
Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19f9000.
Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19fac00.
Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19f9000.
Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19fac00.
Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19f9000.
Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19fac00.
Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19fac00.
Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19fac00.
Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19fac00.
Jan 17 14:10:40 flint /kernel: assertion "cp" failed: file
"../../pci/ncr.c", line 6191
Jan 17 14:10:40 flint /kernel: sd1(ncr0:1:0): COMMAND FAILED (4 28) @f19fac00.
Jan 17 14:10:40 flint /kernel: ncr0: SCSI phase error fixup: CCB already
dequeued (0xf19f9c00)
Jan 17 14:10:56 flint /kernel: ncr0: timeout ccb=f19f7000 (skip)
Jan 17 14:10:56 flint /kernel: ncr0: timeout ccb=f19f7400 (skip)
Jan 17 14:10:56 flint /kernel: ncr0: timeout ccb=f19f7800 (skip)
Jan 17 14:11:04 flint /kernel: ncr0: timeout ccb=f19f9c00 (skip)

Also, is there  a way to get a list of bad sectors, or better yet, force
the drive to check for bad sectors, similar to the way the Adaptec does it
in the card's BIOS ?

	---Mike
**********************************************************************
Mike Tancsa, Network Admin        *  mike@sentex.net
Sentex Communications Corp,       *  http://www.sentex.net/mike
Cambridge, Ontario                *  01.519.651.3400
Canada                            *

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3.0.5.32.19990117152230.03aee110>