Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 24 Mar 2018 23:23:31 +0000 (UTC)
From:      Ian Lepore <ian@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-11@freebsd.org
Subject:   svn commit: r331506 - in stable/11/sys: arm/at91 arm/broadcom/bcm2835 arm/freescale/imx arm/freescale/vybrid arm/lpc arm/samsung/exynos arm/ti dev/flash dev/spibus dev/xilinx mips/atheros mips/medi...
Message-ID:  <201803242323.w2ONNVMg036256@repo.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: ian
Date: Sat Mar 24 23:23:31 2018
New Revision: 331506
URL: https://svnweb.freebsd.org/changeset/base/331506

Log:
  MFC r310017, r310229, r312289, r327260, r329539, r329544-r329546, r329620,
      r329729, r329911, r329999
  
  r310017:
  [spi] reformat message
  
  This commit corrects print of nomatch (newline was too early)
  
  Submitted by:	Hiroki Mori <yamori813@yahoo.co.jp>
  Reviewed by:	ray, loos, mizhka
  Differential Revision:	https://reviews.freebsd.org/D8749
  
  r310229:
  ofw_spi: Parse property for the SPI mode and CS polarity.
  As cs is stored in a uint32_t, use the last bit to store the
  active high flag as it's unlikely that we will have that much CS.
  
  Reviewed by:	loos
  Differential Revision:	https://reviews.freebsd.org/D8614
  
  r312289:
  [spibus] small code refactoring
  
  Merge 3 sequential printf calls into one.
  
  Reported by:	rpokala
  Reviewed by:	rpokala, adrian
  Approved by:	adrian (mentor)
  Differential Revision:	https://reviews.freebsd.org/D8795
  
  r327260:
  SPDX: fix wrong license ID tag in dev/spibus.
  
  r329539:
  Provide public declarations for ofw_spibus_driver and ofw_spibus_devclass
  so other drivers can refer to them in DRIVER_MODULE() decls.
  
  r329544:
  Add modules/spi as a gathering point for SPI-related modules, analagous to
  modules/i2c for i2c/iicbus modules.  Build spibus as a module.
  
  r329545:
  Add ofw_bus_if.h to SRCS.
  
  r329546:
  Build at45d and mx25l SPI flash drivers as modules.
  
  r329620:
  Add missing MODULE_DEPENDS().
  
  r329729:
  Remove some files that snuck in via cut and paste.
  
  Having these compiled into the module causes the kobj method descriptors
  to be resolved incorrectly (by the compile-time linker instead of the
  kernel linker), which then leads to hours of frustrating debugging.
  
  r329911:
  Add a functional detach() routine, to make things kldunload-friendly.
  
  r329999:
  Add a SPI driver for imx5 and imx6.
  
  It can be compiled into the kernel with "device imx_spi" or loaded as a
  module, which is also named "imx_spi".

Added:
  stable/11/sys/arm/freescale/imx/imx_spi.c
     - copied unchanged from r329999, head/sys/arm/freescale/imx/imx_spi.c
  stable/11/sys/modules/imx/imx_spi/
     - copied from r329999, head/sys/modules/imx/imx_spi/
  stable/11/sys/modules/spi/
     - copied from r329546, head/sys/modules/spi/
Modified:
  stable/11/sys/arm/at91/at91_spi.c
  stable/11/sys/arm/broadcom/bcm2835/bcm2835_spi.c
  stable/11/sys/arm/freescale/imx/files.imx5
  stable/11/sys/arm/freescale/imx/files.imx6
  stable/11/sys/arm/freescale/imx/imx51_ccm.c
  stable/11/sys/arm/freescale/imx/imx6_ccm.c
  stable/11/sys/arm/freescale/imx/imx6_ccmreg.h
  stable/11/sys/arm/freescale/imx/imx_ccmvar.h
  stable/11/sys/arm/freescale/vybrid/vf_spi.c
  stable/11/sys/arm/lpc/lpc_spi.c
  stable/11/sys/arm/samsung/exynos/exynos5_spi.c
  stable/11/sys/arm/ti/ti_spi.c
  stable/11/sys/dev/flash/at45d.c
  stable/11/sys/dev/flash/mx25l.c
  stable/11/sys/dev/spibus/ofw_spibus.c
  stable/11/sys/dev/spibus/spibusvar.h
  stable/11/sys/dev/xilinx/axi_quad_spi.c
  stable/11/sys/mips/atheros/ar71xx_spi.c
  stable/11/sys/mips/mediatek/mtk_spi_v1.c
  stable/11/sys/mips/mediatek/mtk_spi_v2.c
  stable/11/sys/mips/rt305x/rt305x_spi.c
  stable/11/sys/modules/Makefile
  stable/11/sys/modules/imx/Makefile
  stable/11/sys/modules/spi/at45d/Makefile
  stable/11/sys/modules/spi/mx25l/Makefile
Directory Properties:
  stable/11/   (props changed)

Modified: stable/11/sys/arm/at91/at91_spi.c
==============================================================================
--- stable/11/sys/arm/at91/at91_spi.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/at91/at91_spi.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -304,6 +304,8 @@ at91_spi_transfer(device_t dev, device_t child, struct
 	/* get the proper chip select */
 	spibus_get_cs(child, &cs);
 
+	cs &= ~SPIBUS_CS_HIGH;
+
 	sc = device_get_softc(dev);
 	i = 0;
 

Modified: stable/11/sys/arm/broadcom/bcm2835/bcm2835_spi.c
==============================================================================
--- stable/11/sys/arm/broadcom/bcm2835/bcm2835_spi.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/broadcom/bcm2835/bcm2835_spi.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -436,6 +436,9 @@ bcm_spi_transfer(device_t dev, device_t child, struct 
 
 	/* Get the proper chip select for this child. */
 	spibus_get_cs(child, &cs);
+
+	cs &= ~SPIBUS_CS_HIGH;
+
 	if (cs > 2) {
 		device_printf(dev,
 		    "Invalid chip select %d requested by %s\n", cs,

Modified: stable/11/sys/arm/freescale/imx/files.imx5
==============================================================================
--- stable/11/sys/arm/freescale/imx/files.imx5	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/freescale/imx/files.imx5	Sat Mar 24 23:23:31 2018	(r331506)
@@ -52,3 +52,6 @@ dev/vt/hw/fb/vt_early_fb.c		optional vt
 # Fast Ethernet Controller
 dev/ffec/if_ffec.c 			optional ffec
 
+# SPI
+arm/freescale/imx/imx_spi.c		optional imx_spi
+

Modified: stable/11/sys/arm/freescale/imx/files.imx6
==============================================================================
--- stable/11/sys/arm/freescale/imx/files.imx6	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/freescale/imx/files.imx6	Sat Mar 24 23:23:31 2018	(r331506)
@@ -22,6 +22,7 @@ arm/freescale/imx/imx_machdep.c		standard
 arm/freescale/imx/imx_gpt.c		optional imx_gpt
 arm/freescale/imx/imx_gpio.c		optional gpio
 arm/freescale/imx/imx_i2c.c		optional fsliic
+arm/freescale/imx/imx_spi.c		optional imx_spi
 arm/freescale/imx/imx6_sdma.c		optional sdma
 arm/freescale/imx/imx6_audmux.c		optional sound
 arm/freescale/imx/imx6_ssi.c		optional sound

Modified: stable/11/sys/arm/freescale/imx/imx51_ccm.c
==============================================================================
--- stable/11/sys/arm/freescale/imx/imx51_ccm.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/freescale/imx/imx51_ccm.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -622,6 +622,13 @@ imx_ccm_usbphy_enable(device_t dev)
 }
 
 uint32_t
+imx_ccm_ecspi_hz(void)
+{
+
+	return (imx51_get_clock(IMX51CLK_CSPI_CLK_ROOT));
+}
+
+uint32_t
 imx_ccm_ipg_hz(void)
 {
 
@@ -655,3 +662,4 @@ imx_ccm_ahb_hz(void)
 
 	return (imx51_get_clock(IMX51CLK_AHB_CLK_ROOT));
 }
+

Modified: stable/11/sys/arm/freescale/imx/imx6_ccm.c
==============================================================================
--- stable/11/sys/arm/freescale/imx/imx6_ccm.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/freescale/imx/imx6_ccm.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -96,8 +96,9 @@ ccm_init_gates(struct ccm_softc *sc)
 	reg = CCGR0_AIPS_TZ1 | CCGR0_AIPS_TZ2 | CCGR0_ABPHDMA;
 	WR4(sc, CCM_CCGR0, reg);
 
-	/* enet, epit, gpt */
-	reg = CCGR1_ENET | CCGR1_EPIT1 | CCGR1_GPT;
+	/* enet, epit, gpt, spi */
+	reg = CCGR1_ENET | CCGR1_EPIT1 | CCGR1_GPT | CCGR1_ECSPI1 |
+	    CCGR1_ECSPI2 | CCGR1_ECSPI3 | CCGR1_ECSPI4 | CCGR1_ECSPI5;
 	WR4(sc, CCM_CCGR1, reg);
 
 	/* ipmux & ipsync (bridges), iomux, i2c */
@@ -349,6 +350,13 @@ imx6_ccm_sata_enable(void)
 	WR4(ccm_sc, CCM_ANALOG_PLL_ENET, v);
 
 	return 0;
+}
+
+uint32_t
+imx_ccm_ecspi_hz(void)
+{
+
+	return (60000000);
 }
 
 uint32_t

Modified: stable/11/sys/arm/freescale/imx/imx6_ccmreg.h
==============================================================================
--- stable/11/sys/arm/freescale/imx/imx6_ccmreg.h	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/freescale/imx/imx6_ccmreg.h	Sat Mar 24 23:23:31 2018	(r331506)
@@ -80,9 +80,15 @@
 #define	  CCGR0_AIPS_TZ2			  (0x3 << 2)
 #define	  CCGR0_ABPHDMA				  (0x3 << 4)
 #define	CCM_CCGR1				0x06C
+#define	  CCGR1_ECSPI1				  (0x3 <<  0)
+#define	  CCGR1_ECSPI2				  (0x3 <<  2)
+#define	  CCGR1_ECSPI3				  (0x3 <<  4)
+#define	  CCGR1_ECSPI4				  (0x3 <<  6)
+#define	  CCGR1_ECSPI5				  (0x3 <<  8)
 #define	  CCGR1_ENET				  (0x3 << 10)
 #define	  CCGR1_EPIT1				  (0x3 << 12)
 #define	  CCGR1_EPIT2				  (0x3 << 14)
+#define	  CCGR1_ESAI				  (0x3 << 16)
 #define	  CCGR1_GPT				  (0x3 << 20)
 #define	  CCGR1_GPT_SERIAL			  (0x3 << 22)
 #define	CCM_CCGR2				0x070

Modified: stable/11/sys/arm/freescale/imx/imx_ccmvar.h
==============================================================================
--- stable/11/sys/arm/freescale/imx/imx_ccmvar.h	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/freescale/imx/imx_ccmvar.h	Sat Mar 24 23:23:31 2018	(r331506)
@@ -43,6 +43,7 @@
  * board setup code has to handle those things.
  */
 
+uint32_t imx_ccm_ecspi_hz(void);
 uint32_t imx_ccm_ipg_hz(void);
 uint32_t imx_ccm_perclk_hz(void);
 uint32_t imx_ccm_sdhci_hz(void);

Copied: stable/11/sys/arm/freescale/imx/imx_spi.c (from r329999, head/sys/arm/freescale/imx/imx_spi.c)
==============================================================================
--- /dev/null	00:00:00 1970	(empty, because file is newly added)
+++ stable/11/sys/arm/freescale/imx/imx_spi.c	Sat Mar 24 23:23:31 2018	(r331506, copy of r329999, head/sys/arm/freescale/imx/imx_spi.c)
@@ -0,0 +1,604 @@
+/*-
+ * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
+ *
+ * Copyright (c) 2018 Ian Lepore <ian@freebsd.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+/*
+ * Driver for imx Enhanced Configurable SPI; master-mode only.
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+#include <sys/gpio.h>
+#include <sys/kernel.h>
+#include <sys/lock.h>
+#include <sys/module.h>
+#include <sys/mutex.h>
+#include <sys/rman.h>
+#include <sys/sysctl.h>
+#include <machine/bus.h>
+#include <machine/cpu.h>
+#include <machine/intr.h>
+
+#include <arm/freescale/imx/imx_ccmvar.h>
+
+#include <dev/gpio/gpiobusvar.h>
+#include <dev/ofw/ofw_bus.h>
+#include <dev/ofw/ofw_bus_subr.h>
+#include <dev/ofw/openfirm.h>
+#include <dev/spibus/spi.h>
+#include <dev/spibus/spibusvar.h>
+
+#include "spibus_if.h"
+
+#define	ECSPI_RXDATA            0x00
+#define	ECSPI_TXDATA            0x04
+#define	ECSPI_CTLREG            0x08
+#define	  CTLREG_BLEN_SHIFT	  20
+#define	  CTLREG_BLEN_MASK	  0x0fff
+#define	  CTLREG_CSEL_SHIFT	  18
+#define	  CTLREG_CSEL_MASK	  0x03
+#define	  CTLREG_DRCTL_SHIFT	  16
+#define	  CTLREG_DRCTL_MASK	  0x03
+#define	  CTLREG_PREDIV_SHIFT	  12
+#define	  CTLREG_PREDIV_MASK	  0x0f
+#define	  CTLREG_POSTDIV_SHIFT	  8
+#define	  CTLREG_POSTDIV_MASK	  0x0f
+#define	  CTLREG_CMODE_SHIFT	  4
+#define	  CTLREG_CMODE_MASK	  0x0f
+#define	  CTLREG_CMODES_MASTER	  (CTLREG_CMODE_MASK << CTLREG_CMODE_SHIFT)
+#define	  CTLREG_SMC		  (1u << 3)
+#define	  CTLREG_XCH		  (1u << 2)
+#define	  CTLREG_HT		  (1u << 1)
+#define	  CTLREG_EN		  (1u << 0)
+#define	ECSPI_CFGREG		0x0c
+#define	  CFGREG_HTLEN_SHIFT	  24
+#define	  CFGREG_SCLKCTL_SHIFT	  20
+#define	  CFGREG_DATACTL_SHIFT	  16
+#define	  CFGREG_SSPOL_SHIFT	  12
+#define	  CFGREG_SSCTL_SHIFT	   8
+#define	  CFGREG_SCLKPOL_SHIFT	   4 
+#define	  CFGREG_SCLKPHA_SHIFT	   0
+#define	  CFGREG_MASK		   0x0f /* all CFGREG fields are 4 bits */
+#define	ECSPI_INTREG            0x10
+#define	  INTREG_TCEN		  (1u << 7)
+#define	  INTREG_ROEN		  (1u << 6)
+#define	  INTREG_RFEN		  (1u << 5)
+#define	  INTREG_RDREN		  (1u << 4)
+#define	  INTREG_RREN		  (1u << 3)
+#define	  INTREG_TFEN		  (1u << 2)
+#define	  INTREG_TDREN		  (1u << 1)
+#define	  INTREG_TEEN		  (1u << 0)
+#define	ECSPI_DMAREG            0x14
+#define	  DMA_RX_THRESH_SHIFT	  16
+#define	  DMA_RX_THRESH_MASK	  0x3f
+#define	  DMA_TX_THRESH_SHIFT	  0
+#define	  DMA_TX_THRESH_MASK	  0x3f
+#define	ECSPI_STATREG           0x18
+#define	  SREG_TC		  (1u << 7)
+#define	  SREG_RO		  (1u << 6)
+#define	  SREG_RF		  (1u << 5)
+#define	  SREG_RDR		  (1u << 4)
+#define	  SREG_RR		  (1u << 3)
+#define	  SREG_TF		  (1u << 2)
+#define	  SREG_TDR		  (1u << 1)
+#define	  SREG_TE		  (1u << 0)
+#define	ECSPI_PERIODREG         0x1c
+#define	ECSPI_TESTREG           0x20
+
+#define	CS_MAX		4	/* Max number of chip selects. */
+#define	CS_MASK		0x03	/* Mask flag bits out of chipsel. */
+
+#define	FIFO_SIZE	64
+#define	FIFO_RXTHRESH	32
+#define	FIFO_TXTHRESH	32
+
+struct spi_softc {
+	device_t 		dev;
+	device_t		spibus;
+	struct mtx		mtx;
+	struct resource		*memres;
+	struct resource		*intres;
+	void			*inthandle;
+	gpio_pin_t		cspins[CS_MAX];
+	u_int			debug;
+	u_int			basefreq;
+	uint32_t		ctlreg;
+	uint32_t		intreg;
+	uint32_t		fifocnt;
+	uint8_t			*rxbuf;
+	uint32_t		rxidx;
+	uint32_t		rxlen;
+	uint8_t			*txbuf;
+	uint32_t		txidx;
+	uint32_t		txlen;
+};
+
+static struct ofw_compat_data compat_data[] = {
+	{"fsl,imx51-ecspi",  true},
+	{"fsl,imx53-ecspi",  true},
+	{"fsl,imx6dl-ecspi", true},
+	{"fsl,imx6q-ecspi",  true},
+	{"fsl,imx6sx-ecspi", true},
+	{"fsl,imx6ul-ecspi", true},
+	{NULL,               false}
+};
+
+static inline uint32_t
+RD4(struct spi_softc *sc, bus_size_t offset)
+{
+
+	return (bus_read_4(sc->memres, offset));
+}
+
+static inline void
+WR4(struct spi_softc *sc, bus_size_t offset, uint32_t value)
+{
+
+	bus_write_4(sc->memres, offset, value);
+}
+
+static u_int
+spi_calc_clockdiv(struct spi_softc *sc, u_int busfreq)
+{
+	u_int post, pre;
+
+	/* Returning 0 effectively sets both dividers to 1. */
+	if (sc->basefreq <= busfreq)
+		return (0);
+
+	/*
+	 * Brute-force this; all real-world bus speeds are going to be found on
+	 * the 1st or 2nd time through this loop.
+	 */
+	for (post = 0; post < 16; ++post) {
+		pre = ((sc->basefreq >> post) / busfreq) - 1;
+		if (pre < 16)
+			break;
+	}
+	if (post == 16) {
+		/* The lowest we can go is ~115 Hz. */
+		pre = 15;
+		post = 15;
+	}
+
+	if (sc->debug >= 2) {
+		device_printf(sc->dev,
+		    "base %u bus %u; pre %u, post %u; actual busfreq %u\n",
+		    sc->basefreq, busfreq, pre, post,
+		    (sc->basefreq / (pre + 1)) / (1 << post));
+	}
+
+	return (pre << CTLREG_PREDIV_SHIFT) | (post << CTLREG_POSTDIV_SHIFT);
+}
+
+static void
+spi_set_chipsel(struct spi_softc *sc, u_int cs, bool active)
+{
+	bool pinactive;
+
+	/*
+	 * This is kinda crazy... the gpio pins for chipsel are defined as
+	 * active-high in the dts, but are supposed to be treated as active-low
+	 * by this driver.  So to turn on chipsel we have to invert the value
+	 * passed to gpio_pin_set_active().  Then, to make it more fun, any
+	 * slave can say its chipsel is active-high, so if that option is
+	 * on, we have to invert the value again.
+	 */
+	pinactive = !active ^ (bool)(cs & SPIBUS_CS_HIGH);
+
+	if (sc->debug >= 2) {
+		device_printf(sc->dev, "chipsel %u changed to %u\n",
+		    (cs & ~SPIBUS_CS_HIGH), pinactive);
+	}
+
+	/*
+	 * Change the pin, then do a dummy read of its current state to ensure
+	 * that the state change reaches the hardware before proceeding.
+	 */
+	gpio_pin_set_active(sc->cspins[cs & ~SPIBUS_CS_HIGH], pinactive);
+	gpio_pin_is_active(sc->cspins[cs & ~SPIBUS_CS_HIGH], &pinactive);
+}
+
+static void
+spi_hw_setup(struct spi_softc *sc, u_int cs, u_int mode, u_int freq)
+{
+	uint32_t reg;
+
+	/*
+	 * Set up control register, and write it first to bring the device out
+	 * of reset.
+	 */
+	sc->ctlreg  = CTLREG_EN | CTLREG_CMODES_MASTER | CTLREG_SMC;
+	sc->ctlreg |= spi_calc_clockdiv(sc, freq);
+	sc->ctlreg |= 7 << CTLREG_BLEN_SHIFT; /* XXX byte at a time */
+	WR4(sc, ECSPI_CTLREG, sc->ctlreg);
+
+	/*
+	 * Set up the config register.  Note that we do all transfers with the
+	 * SPI hardware's chip-select set to zero.  The actual chip select is
+	 * handled with a gpio pin.
+	 */
+	reg = 0;
+	if (cs & SPIBUS_CS_HIGH)
+		reg |= 1u << CFGREG_SSPOL_SHIFT;
+	if (mode & SPIBUS_MODE_CPHA)
+		reg |= 1u << CFGREG_SCLKPHA_SHIFT;
+	if (mode & SPIBUS_MODE_CPOL) {
+		reg |= 1u << CFGREG_SCLKPOL_SHIFT;
+		reg |= 1u << CFGREG_SCLKCTL_SHIFT;
+	}
+	WR4(sc, ECSPI_CFGREG, reg);
+
+	/*
+	 * Set up the rx/tx FIFO interrupt thresholds.
+	 */
+	reg  = (FIFO_RXTHRESH << DMA_RX_THRESH_SHIFT);
+	reg |= (FIFO_TXTHRESH << DMA_TX_THRESH_SHIFT);
+	WR4(sc, ECSPI_DMAREG, reg);
+
+	/*
+	 * Do a dummy read, to make sure the preceding writes reach the spi
+	 * hardware before we assert any gpio chip select.
+	 */
+	(void)RD4(sc, ECSPI_CFGREG);
+}
+
+static void
+spi_empty_rxfifo(struct spi_softc *sc)
+{
+
+	while (sc->rxidx < sc->rxlen && (RD4(sc, ECSPI_STATREG) & SREG_RR)) {
+		sc->rxbuf[sc->rxidx++] = (uint8_t)RD4(sc, ECSPI_RXDATA);
+		--sc->fifocnt;
+	}
+}
+
+static void
+spi_fill_txfifo(struct spi_softc *sc)
+{
+
+	while (sc->txidx < sc->txlen && sc->fifocnt < FIFO_SIZE) {
+		WR4(sc, ECSPI_TXDATA, sc->txbuf[sc->txidx++]);
+		++sc->fifocnt;
+	}
+
+	/*
+	 * If we're out of data, disable tx data ready (threshold) interrupts,
+	 * and enable tx fifo empty interrupts.
+	 */
+	if (sc->txidx == sc->txlen)
+		sc->intreg = (sc->intreg & ~INTREG_TDREN) | INTREG_TEEN;
+}
+
+static void
+spi_intr(void *arg)
+{
+	struct spi_softc *sc = arg;
+	uint32_t intreg, status;
+
+	mtx_lock(&sc->mtx);
+
+	sc = arg;
+	intreg = sc->intreg;
+	status = RD4(sc, ECSPI_STATREG);
+	WR4(sc, ECSPI_STATREG, status); /* Clear w1c bits. */
+
+	/*
+	 * If we get an overflow error, just signal that the transfer is done
+	 * and wakeup the waiting thread, which will see that txidx != txlen and
+	 * return an IO error to the caller.
+	 */
+	if (__predict_false(status & SREG_RO)) {
+		if (sc->debug || bootverbose) {
+			device_printf(sc->dev, "rxoverflow rxidx %u txidx %u\n",
+			    sc->rxidx, sc->txidx);
+		}
+		sc->intreg = 0;
+		wakeup(sc);
+		mtx_unlock(&sc->mtx);
+		return;
+	}
+
+	if (status & SREG_RR)
+		spi_empty_rxfifo(sc);
+
+	if (status & SREG_TDR)
+		spi_fill_txfifo(sc);
+
+	/*
+	 * If we're out of bytes to send...
+	 *  - If Transfer Complete is set (shift register is empty) and we've
+	 *    received everything we expect, we're all done.
+	 *  - Else if Tx Fifo Empty is set, we need to stop waiting for that and
+	 *    switch to waiting for Transfer Complete (wait for shift register
+	 *    to empty out), and also for Receive Ready (last of incoming data).
+	 */
+	if (sc->txidx == sc->txlen) {
+		if ((status & SREG_TC) && sc->fifocnt == 0) {
+			sc->intreg = 0;
+			wakeup(sc);
+		} else if (status & SREG_TE) {
+			sc->intreg &= ~(sc->intreg & ~INTREG_TEEN);
+			sc->intreg |= INTREG_TCEN | INTREG_RREN;
+		}
+	}
+
+	/*
+	 * If interrupt flags changed, write the new flags to the hardware and
+	 * do a dummy readback to ensure the changes reach the hardware before
+	 * we exit the isr.
+	 */
+	if (sc->intreg != intreg) {
+		WR4(sc, ECSPI_INTREG, sc->intreg);
+		(void)RD4(sc, ECSPI_INTREG);
+	}
+
+	if (sc->debug >= 3) {
+		device_printf(sc->dev,
+		    "spi_intr, sreg 0x%08x intreg was 0x%08x now 0x%08x\n",
+		    status, intreg, sc->intreg);
+	}
+
+	mtx_unlock(&sc->mtx);
+}
+
+static int
+spi_xfer_buf(struct spi_softc *sc, void *rxbuf, void *txbuf, uint32_t len)
+{
+	int err;
+
+	if (sc->debug >= 1) {
+		device_printf(sc->dev,
+		    "spi_xfer_buf, rxbuf %p txbuf %p len %u\n",
+		    rxbuf, txbuf, len);
+	}
+
+	if (len == 0)
+		return (0);
+
+	sc->rxbuf = rxbuf;
+	sc->rxlen = len;
+	sc->rxidx = 0;
+	sc->txbuf = txbuf;
+	sc->txlen = len;
+	sc->txidx = 0;
+	sc->intreg = INTREG_RDREN | INTREG_TDREN;
+	spi_fill_txfifo(sc);
+
+	/* Enable interrupts last; spi_fill_txfifo() can change sc->intreg */
+	WR4(sc, ECSPI_INTREG, sc->intreg);
+
+	err = 0;
+	while (err == 0 && sc->intreg != 0)
+		err = msleep(sc, &sc->mtx, 0, "imxspi", 10 * hz);
+
+	if (sc->rxidx != sc->rxlen || sc->txidx != sc->txlen)
+		err = EIO;
+
+	return (err);
+}
+
+static int
+spi_transfer(device_t dev, device_t child, struct spi_command *cmd)
+{
+	struct spi_softc *sc = device_get_softc(dev);
+	uint32_t cs, mode, clock;
+	int err;
+
+	spibus_get_cs(child, &cs);
+	spibus_get_clock(child, &clock);
+	spibus_get_mode(child, &mode);
+
+	if (cs > CS_MAX || sc->cspins[cs] == NULL) {
+		if (sc->debug || bootverbose)
+			device_printf(sc->dev, "Invalid chip select %u\n", cs);
+		return (EINVAL);
+	}
+
+	mtx_lock(&sc->mtx);
+
+	if (sc->debug >= 1) {
+		device_printf(sc->dev,
+		    "spi_transfer, cs 0x%x clock %u mode %u\n",
+		    cs, clock, mode);
+	}
+
+	/* Set up the hardware and select the device. */
+	spi_hw_setup(sc, cs, mode, clock);
+	spi_set_chipsel(sc, cs, true);
+
+	/* Transfer command then data bytes. */
+	err = 0;
+	if (cmd->tx_cmd_sz > 0)
+		err = spi_xfer_buf(sc, cmd->rx_cmd, cmd->tx_cmd,
+		    cmd->tx_cmd_sz);
+	if (cmd->tx_data_sz > 0 && err == 0)
+		err = spi_xfer_buf(sc, cmd->rx_data, cmd->tx_data,
+		    cmd->tx_data_sz);
+
+	/* Deselect the device, turn off (and reset) hardware. */
+	spi_set_chipsel(sc, cs, false);
+	WR4(sc, ECSPI_CTLREG, 0);
+
+	mtx_unlock(&sc->mtx);
+
+	return (err);
+}
+
+static phandle_t
+spi_get_node(device_t bus, device_t dev)
+{
+
+	/*
+	 * Share our controller node with our spibus child; it instantiates
+	 * devices by walking the children contained within our node.
+	 */
+	return ofw_bus_get_node(bus);
+}
+
+static int
+spi_detach(device_t dev)
+{
+	struct spi_softc *sc = device_get_softc(dev);
+	int idx;
+
+	mtx_lock(&sc->mtx);
+
+	bus_generic_detach(sc->dev);
+	if (sc->spibus != NULL)
+		device_delete_child(dev, sc->spibus);
+
+	for (idx = 0; idx < nitems(sc->cspins); ++idx) {
+		if (sc->cspins[idx] != NULL)
+			gpio_pin_release(sc->cspins[idx]);
+	}
+
+	if (sc->inthandle != NULL)
+		bus_teardown_intr(sc->dev, sc->intres, sc->inthandle);
+	if (sc->intres != NULL)
+		bus_release_resource(sc->dev, SYS_RES_IRQ, 0, sc->intres);
+	if (sc->memres != NULL)
+		bus_release_resource(sc->dev, SYS_RES_MEMORY, 0, sc->memres);
+
+	mtx_unlock(&sc->mtx);
+	mtx_destroy(&sc->mtx);
+
+	return (0);
+}
+
+static int
+spi_attach(device_t dev)
+{
+	struct spi_softc *sc = device_get_softc(dev);
+	phandle_t node;
+	int err, idx, rid;
+
+	sc->dev = dev;
+	sc->basefreq = imx_ccm_ecspi_hz();
+
+	mtx_init(&sc->mtx, device_get_nameunit(dev), NULL, MTX_DEF);
+
+	/* Set up debug-enable sysctl. */
+	SYSCTL_ADD_INT(device_get_sysctl_ctx(sc->dev), 
+	    SYSCTL_CHILDREN(device_get_sysctl_tree(sc->dev)),
+	    OID_AUTO, "debug", CTLFLAG_RWTUN, &sc->debug, 0,
+	    "Enable debug, higher values = more info");
+
+	/* Allocate mmio register access resources. */
+	rid = 0;
+	sc->memres = bus_alloc_resource_any(sc->dev, SYS_RES_MEMORY, &rid,
+	    RF_ACTIVE);
+	if (sc->memres == NULL) {
+		device_printf(sc->dev, "could not allocate registers\n");
+		spi_detach(sc->dev);
+		return (ENXIO);
+	}
+
+	/* Allocate interrupt resources and set up handler. */
+	rid = 0;
+	sc->intres = bus_alloc_resource_any(sc->dev, SYS_RES_IRQ, &rid,
+	    RF_ACTIVE);
+	if (sc->intres == NULL) {
+		device_printf(sc->dev, "could not allocate interrupt\n");
+		device_detach(sc->dev);
+		return (ENXIO);
+	}
+	err = bus_setup_intr(sc->dev, sc->intres, INTR_TYPE_MISC | INTR_MPSAFE,
+	    NULL, spi_intr, sc, &sc->inthandle);
+	if (err != 0) {
+		device_printf(sc->dev, "could not setup interrupt handler");
+		device_detach(sc->dev);
+		return (ENXIO);
+	}
+
+	/* Allocate gpio pins for configured chip selects. */
+	node = ofw_bus_get_node(sc->dev);
+	for (err = 0, idx = 0; err == 0 && idx < nitems(sc->cspins); ++idx) {
+		err = gpio_pin_get_by_ofw_propidx(sc->dev, node, "cs-gpios",
+		    idx, &sc->cspins[idx]);
+		if (err == 0) {
+			gpio_pin_setflags(sc->cspins[idx], GPIO_PIN_OUTPUT);
+		} else if (sc->debug >= 2) {
+			device_printf(sc->dev,
+			    "cannot configure gpio for chip select %u\n", idx);
+		}
+	}
+
+	/*
+	 * Hardware init: put all channels into Master mode, turn off the enable
+	 * bit (gates off clocks); we only enable the hardware while xfers run.
+	 */
+	WR4(sc, ECSPI_CTLREG, CTLREG_CMODES_MASTER);
+
+	/* Attach the bus driver. */
+	sc->spibus = device_add_child(dev, "spibus", -1);
+	return (bus_generic_attach(sc->dev));
+}
+
+static int
+spi_probe(device_t dev)
+{
+
+	if (!ofw_bus_status_okay(dev))
+		return (ENXIO);
+
+	if (!ofw_bus_search_compatible(dev, compat_data)->ocd_data)
+		return (ENXIO);
+
+	device_set_desc(dev, "i.MX ECSPI Master");
+	return (BUS_PROBE_DEFAULT);
+}
+
+static device_method_t spi_methods[] = {
+	DEVMETHOD(device_probe,		spi_probe),
+	DEVMETHOD(device_attach,	spi_attach),
+	DEVMETHOD(device_detach,	spi_detach),
+
+        /* spibus_if  */
+	DEVMETHOD(spibus_transfer,	spi_transfer),
+
+        /* ofw_bus_if */
+	DEVMETHOD(ofw_bus_get_node,	spi_get_node),
+
+	DEVMETHOD_END
+};
+
+static driver_t spi_driver = {
+	"imx_spi",
+	spi_methods,
+	sizeof(struct spi_softc),
+};
+
+static devclass_t spi_devclass;
+
+DRIVER_MODULE(imx_spi, simplebus, spi_driver, spi_devclass, 0, 0);
+DRIVER_MODULE(ofw_spibus, imx_spi, ofw_spibus_driver, ofw_spibus_devclass, 0, 0);
+MODULE_DEPEND(imx_spi, ofw_spibus, 1, 1, 1);

Modified: stable/11/sys/arm/freescale/vybrid/vf_spi.c
==============================================================================
--- stable/11/sys/arm/freescale/vybrid/vf_spi.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/freescale/vybrid/vf_spi.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -263,6 +263,8 @@ spi_transfer(device_t dev, device_t child, struct spi_
 	/* get the proper chip select */
 	spibus_get_cs(child, &cs);
 
+	cs &= ~SPIBUS_CS_HIGH;
+
 	/* Command */
 	spi_txrx(sc, cmd->tx_cmd, cmd->rx_cmd, cmd->tx_cmd_sz, cs);
 

Modified: stable/11/sys/arm/lpc/lpc_spi.c
==============================================================================
--- stable/11/sys/arm/lpc/lpc_spi.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/lpc/lpc_spi.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -149,6 +149,8 @@ lpc_spi_transfer(device_t dev, device_t child, struct 
 
 	spibus_get_cs(child, &cs);
 
+	cs &= ~SPIBUS_CS_HIGH;
+
 	/* Set CS active */
 	lpc_gpio_set_state(child, cs, 0);
 

Modified: stable/11/sys/arm/samsung/exynos/exynos5_spi.c
==============================================================================
--- stable/11/sys/arm/samsung/exynos/exynos5_spi.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/samsung/exynos/exynos5_spi.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -204,6 +204,8 @@ spi_transfer(device_t dev, device_t child, struct spi_
 	/* get the proper chip select */
 	spibus_get_cs(child, &cs);
 
+	cs &= ~SPIBUS_CS_HIGH;
+
 	/* Command */
 	spi_txrx(sc, cmd->tx_cmd, cmd->rx_cmd, cmd->tx_cmd_sz, cs);
 

Modified: stable/11/sys/arm/ti/ti_spi.c
==============================================================================
--- stable/11/sys/arm/ti/ti_spi.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/arm/ti/ti_spi.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -458,6 +458,9 @@ ti_spi_transfer(device_t dev, device_t child, struct s
 
 	/* Get the proper chip select for this child. */
 	spibus_get_cs(child, &cs);
+
+	cs &= ~SPIBUS_CS_HIGH;
+
 	if (cs > sc->sc_numcs) {
 		device_printf(dev, "Invalid chip select %d requested by %s\n",
 		    cs, device_get_nameunit(child));

Modified: stable/11/sys/dev/flash/at45d.c
==============================================================================
--- stable/11/sys/dev/flash/at45d.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/dev/flash/at45d.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -450,3 +450,4 @@ static driver_t at45d_driver = {
 };
 
 DRIVER_MODULE(at45d, spibus, at45d_driver, at45d_devclass, NULL, NULL);
+MODULE_DEPEND(at45d, spibus, 1, 1, 1);

Modified: stable/11/sys/dev/flash/mx25l.c
==============================================================================
--- stable/11/sys/dev/flash/mx25l.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/dev/flash/mx25l.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -89,8 +89,13 @@ struct mx25l_softc 
 	struct proc	*sc_p;
 	struct bio_queue_head sc_bio_queue;
 	unsigned int	sc_flags;
+	unsigned int	sc_taskstate;
 };
 
+#define	TSTATE_STOPPED	0
+#define	TSTATE_STOPPING	1
+#define	TSTATE_RUNNING	2
+
 #define M25PXX_LOCK(_sc)		mtx_lock(&(_sc)->sc_mtx)
 #define	M25PXX_UNLOCK(_sc)		mtx_unlock(&(_sc)->sc_mtx)
 #define M25PXX_LOCK_INIT(_sc) \
@@ -527,6 +532,8 @@ mx25l_attach(device_t dev)
 	bioq_init(&sc->sc_bio_queue);
 
 	kproc_create(&mx25l_task, sc, &sc->sc_p, 0, 0, "task: mx25l flash");
+	sc->sc_taskstate = TSTATE_RUNNING;
+
 	device_printf(sc->sc_dev, "%s, sector %d bytes, %d sectors\n", 
 	    ident->name, ident->sectorsize, ident->sectorcount);
 
@@ -536,8 +543,33 @@ mx25l_attach(device_t dev)
 static int
 mx25l_detach(device_t dev)
 {
+	struct mx25l_softc *sc;
+	int err;
 
-	return (EIO);
+	sc = device_get_softc(dev);
+	err = 0;
+
+	M25PXX_LOCK(sc);
+	if (sc->sc_taskstate == TSTATE_RUNNING) {
+		sc->sc_taskstate = TSTATE_STOPPING;
+		wakeup(sc);
+		while (err == 0 && sc->sc_taskstate != TSTATE_STOPPED) {
+			err = msleep(sc, &sc->sc_mtx, 0, "mx25dt", hz * 3);
+			if (err != 0) {
+				sc->sc_taskstate = TSTATE_RUNNING;
+				device_printf(dev,
+				    "Failed to stop queue task\n");
+			}
+		}
+	}
+	M25PXX_UNLOCK(sc);
+
+	if (err == 0 && sc->sc_taskstate == TSTATE_STOPPED) {
+		disk_destroy(sc->sc_disk);
+		bioq_flush(&sc->sc_bio_queue, NULL, ENXIO);
+		M25PXX_LOCK_DESTROY(sc);
+	}
+	return (err);
 }
 
 static int
@@ -605,9 +637,15 @@ mx25l_task(void *arg)
 		dev = sc->sc_dev;
 		M25PXX_LOCK(sc);
 		do {
+			if (sc->sc_taskstate == TSTATE_STOPPING) {
+				sc->sc_taskstate = TSTATE_STOPPED;
+				M25PXX_UNLOCK(sc);
+				wakeup(sc);
+				kproc_exit(0);
+			}
 			bp = bioq_first(&sc->sc_bio_queue);
 			if (bp == NULL)
-				msleep(sc, &sc->sc_mtx, PRIBIO, "jobqueue", 0);
+				msleep(sc, &sc->sc_mtx, PRIBIO, "mx25jq", 0);
 		} while (bp == NULL);
 		bioq_remove(&sc->sc_bio_queue, bp);
 		M25PXX_UNLOCK(sc);
@@ -648,3 +686,4 @@ static driver_t mx25l_driver = {
 };
 
 DRIVER_MODULE(mx25l, spibus, mx25l_driver, mx25l_devclass, 0, 0);
+MODULE_DEPEND(mx25l, spibus, 1, 1, 1);

Modified: stable/11/sys/dev/spibus/ofw_spibus.c
==============================================================================
--- stable/11/sys/dev/spibus/ofw_spibus.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/dev/spibus/ofw_spibus.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -1,5 +1,5 @@
 /*-
- * SPDX-License-Identifier: BSD-4-Clause-FreeBSD
+ * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
  *
  * Copyright (c) 2009, Nathan Whitehorn <nwhitehorn@FreeBSD.org>
  * Copyright (c) 2013 The FreeBSD Foundation
@@ -82,6 +82,7 @@ ofw_spibus_attach(device_t dev)
 	phandle_t child;
 	pcell_t clock, paddr;
 	device_t childdev;
+	uint32_t mode = SPIBUS_MODE_NONE;
 
 	sc->dev = dev;
 
@@ -105,6 +106,24 @@ ofw_spibus_attach(device_t dev)
 		}
 
 		/*
+		 * Try to get the cpol/cpha mode
+		 */
+		if (OF_hasprop(child, "spi-cpol"))
+			mode = SPIBUS_MODE_CPOL;
+		if (OF_hasprop(child, "spi-cpha")) {
+			if (mode == SPIBUS_MODE_CPOL)
+				mode = SPIBUS_MODE_CPOL_CPHA;
+			else
+				mode = SPIBUS_MODE_CPHA;
+		}
+
+		/*
+		 * Try to get the CS polarity
+		 */
+		if (OF_hasprop(child, "spi-cs-high"))
+			paddr |= SPIBUS_CS_HIGH;
+
+		/*
 		 * Get the maximum clock frequency for device, zero means
 		 * use the default bus speed.
 		 */
@@ -122,6 +141,7 @@ ofw_spibus_attach(device_t dev)
 			continue;
 		dinfo->opd_dinfo.cs = paddr;
 		dinfo->opd_dinfo.clock = clock;
+		dinfo->opd_dinfo.mode = mode;
 		if (ofw_bus_gen_setup_devinfo(&dinfo->opd_obdinfo, child) !=
 		    0) {
 			free(dinfo, M_DEVBUF);
@@ -194,10 +214,10 @@ static device_method_t ofw_spibus_methods[] = {
 	DEVMETHOD_END
 };
 
-static devclass_t ofwspibus_devclass;
+devclass_t ofw_spibus_devclass;
 
 DEFINE_CLASS_1(spibus, ofw_spibus_driver, ofw_spibus_methods,
     sizeof(struct spibus_softc), spibus_driver);
-DRIVER_MODULE(ofw_spibus, spi, ofw_spibus_driver, ofwspibus_devclass, 0, 0);
+DRIVER_MODULE(ofw_spibus, spi, ofw_spibus_driver, ofw_spibus_devclass, 0, 0);
 MODULE_VERSION(ofw_spibus, 1);
 MODULE_DEPEND(ofw_spibus, spibus, 1, 1, 1);

Modified: stable/11/sys/dev/spibus/spibusvar.h
==============================================================================
--- stable/11/sys/dev/spibus/spibusvar.h	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/dev/spibus/spibusvar.h	Sat Mar 24 23:23:31 2018	(r331506)
@@ -46,6 +46,8 @@ struct spibus_ivar
 	uint32_t	clock;
 };
 
+#define	SPIBUS_CS_HIGH	(1U << 31)
+
 enum {
 	SPIBUS_IVAR_CS,		/* chip select that we're on */
 	SPIBUS_IVAR_MODE,	/* SPI mode (0-3) */
@@ -66,3 +68,5 @@ SPIBUS_ACCESSOR(clock,		CLOCK,		uint32_t)
 
 extern driver_t spibus_driver;
 extern devclass_t spibus_devclass;
+extern driver_t ofw_spibus_driver;
+extern devclass_t ofw_spibus_devclass;

Modified: stable/11/sys/dev/xilinx/axi_quad_spi.c
==============================================================================
--- stable/11/sys/dev/xilinx/axi_quad_spi.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/dev/xilinx/axi_quad_spi.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -193,6 +193,8 @@ spi_transfer(device_t dev, device_t child, struct spi_
 	/* get the proper chip select */
 	spibus_get_cs(child, &cs);
 
+	cs &= ~SPIBUS_CS_HIGH;
+
 	/* Assert CS */
 	reg = READ4(sc, SPI_SSR);
 	reg &= ~(1 << cs);

Modified: stable/11/sys/mips/atheros/ar71xx_spi.c
==============================================================================
--- stable/11/sys/mips/atheros/ar71xx_spi.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/mips/atheros/ar71xx_spi.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -214,6 +214,8 @@ ar71xx_spi_transfer(device_t dev, device_t child, stru
 
 	spibus_get_cs(child, &cs);
 
+	cs &= ~SPIBUS_CS_HIGH;
+
 	ar71xx_spi_chip_activate(sc, cs);
 
 	KASSERT(cmd->tx_cmd_sz == cmd->rx_cmd_sz, 

Modified: stable/11/sys/mips/mediatek/mtk_spi_v1.c
==============================================================================
--- stable/11/sys/mips/mediatek/mtk_spi_v1.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/mips/mediatek/mtk_spi_v1.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -231,6 +231,8 @@ mtk_spi_transfer(device_t dev, device_t child, struct 
 
 	spibus_get_cs(child, &cs);
 
+	cs &= ~SPIBUS_CS_HIGH;
+
 	if (cs != 0)
 		/* Only 1 CS */
 		return (ENXIO);

Modified: stable/11/sys/mips/mediatek/mtk_spi_v2.c
==============================================================================
--- stable/11/sys/mips/mediatek/mtk_spi_v2.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/mips/mediatek/mtk_spi_v2.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -236,6 +236,8 @@ mtk_spi_transfer(device_t dev, device_t child, struct 
 
 	spibus_get_cs(child, &cs);
 
+	cs &= ~SPIBUS_CS_HIGH;
+
 	if (cs != 0)
 		/* Only 1 CS */
 		return (ENXIO);

Modified: stable/11/sys/mips/rt305x/rt305x_spi.c
==============================================================================
--- stable/11/sys/mips/rt305x/rt305x_spi.c	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/mips/rt305x/rt305x_spi.c	Sat Mar 24 23:23:31 2018	(r331506)
@@ -226,6 +226,8 @@ rt305x_spi_transfer(device_t dev, device_t child, stru
 
 	spibus_get_cs(child, &cs);
 
+	cs &= ~SPIBUS_CS_HIGH;
+
 	if (cs != 0)
 		/* Only 1 CS */
 		return (ENXIO);

Modified: stable/11/sys/modules/Makefile
==============================================================================
--- stable/11/sys/modules/Makefile	Sat Mar 24 23:07:10 2018	(r331505)
+++ stable/11/sys/modules/Makefile	Sat Mar 24 23:23:31 2018	(r331506)
@@ -360,7 +360,7 @@ SUBDIR=	\
 	snp \
 	sound \

*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201803242323.w2ONNVMg036256>