Date: Mon, 4 Jun 2001 21:59:05 -0700 (PDT) From: Archie Cobbs <archie@dellroad.org> To: freebsd-mobile@freebsd.org Subject: MiniPCI screws up PCMCIA slot? Message-ID: <200106050459.f554x5L00406@arch20m.dellroad.org>
next in thread | raw e-mail | index | archive | help
I just replaced a Mini-PCI card (modem only) in an IBM ThinkPad
A20m with a modem+Ethernet one, and now my PC-Card slot has stopped
working properly.
It works under Win98.. and I've tried playing with BIOS interrupt
settings to no avail.
pccardd complains "No card in database for "(null)"("(null)")" and
"pccardc dumpcis" shows a bunch of garbage.
Any ideas? dmesg below.
I'm not sure how adding another PCI device would screw up the
PC-Card stuff, but somehow it has.
Thanks,
-Archie
__________________________________________________________________________
Archie Cobbs * Packet Design * http://www.packetdesign.com
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-RELEASE #4: Mon Jun 4 21:00:07 PDT 2001
root@arch20m.dellroad.org:/usr/src/sys/compile/THINKPAD
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (146.52-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 134152192 (131008K bytes)
avail memory = 127234048 (124252K bytes)
Preloaded elf kernel "kernel" at 0xc0358000.
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 9
pcic-pci0: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 9 at device 2.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
pcic-pci1: <TI PCI-1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 10 at device 2.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq]
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1800-0x183f mem 0xf4100000-0xf411ffff,0xf4120000-0xf4120fff irq 11 at device 3.0 on pci0
fxp0: Ethernet address 00:10:a4:91:e5:8d
pci0: <unknown card> (vendor=0x115d, dev=0x000c) at 3.1 irq 11
csa0: <Crystal Semiconductor CS4614/4622/4624 Audio accelerator/4280 Audio controller> mem 0xf4000000-0xf40fffff,0xf4122000-0xf4122fff irq 9 at device 5.0 on pci0
pcm0: <CS461x PCM Audio> on csa0
pcm0: ac97 codec reports dac not ready
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1850-0x185f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1860-0x187f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
pcic0: <VLSI 82C146> at port 0x3e0-0x3e1 on isa0
pcic0: Polling mode
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ad0: 11509MB <HITACHI_DK23AA-12B> [24944/15/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
pccard: card removed, slot 0
pccard: card inserted, slot 0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200106050459.f554x5L00406>