From owner-freebsd-hackers@FreeBSD.ORG Fri Aug 10 12:53:06 2007 Return-Path: Delivered-To: freebsd-hackers@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id C427016A420 for ; Fri, 10 Aug 2007 12:53:06 +0000 (UTC) (envelope-from mario.lobo@ipad.com.br) Received: from recife.ipad.com.br (recife.ipadnet.com.br [200.249.204.129]) by mx1.freebsd.org (Postfix) with ESMTP id D382F13C468 for ; Fri, 10 Aug 2007 12:53:04 +0000 (UTC) (envelope-from mario.lobo@ipad.com.br) Received: from lobo.ipad.com.br ([192.168.64.1]) (authenticated bits=0) by recife.ipad.com.br (8.12.8/8.12.8) with ESMTP id l7ABthTi029461 for ; Fri, 10 Aug 2007 08:55:43 -0300 From: Mario Lobo Organization: IPAD To: freebsd-hackers@freebsd.org Date: Fri, 10 Aug 2007 11:55:42 +0000 User-Agent: KMail/1.9.4 X-Face: "j9,S@~?m[/.]/lb=?utf-8?q?S=5D=2EI=0A=09ITlWP=3A-?=" MIME-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_+IFvGlSGOm9A6VA" Message-Id: <200708101155.42712.mario.lobo@ipad.com.br> Subject: via IDE controller problem X-BeenThere: freebsd-hackers@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Technical Discussions relating to FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 10 Aug 2007 12:53:06 -0000 --Boundary-00=_+IFvGlSGOm9A6VA Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline I don't know if this is the right place to ask. I searched and googled a lot but could not find anything (execpt people with the same problem). FreeBSD 6.2 (cvsuped to RELENG_6) is not recognizing the pata controller on the VIA VT8237A south bridge on my ASUS P5VD2-X mobo, dispite of the fact that I saw its id inside src/sys/dev/ata/ata-chipset.c,v 1.126.2.19 2007/07/04 12:29:15 I have included the IDE.txt file with all the info I could get from my machine. The pata (and sata) controller ends up identified as GENERIC. I have only IDE drives and can get the system usable by setting hw.ata.atapi_dma: 0 hw.ata.ata_dma: 0 Although dma is enabled in the BIOS, the drives fall back to PIO4. If set the above to 1, FreeBSD reports them (all) at ultraDMA 33 (which, in fact worked as ultraDMA 100 on my previous board). The system boots ok but after 7 or 10 minutes (even if doing nothing), I start geting messages from g_vfs_done(); WRITE DMAERROR that can come from any of the drives until the system becomes unstable and ends up rebooting itself. Everything else works perfectly but the PIO4 mode hogs everything down !! Any suggestions? info? direction? Thanks, -- ********************************************************** //| //| Mario Lobo // |// | http://www.ipad.com.br // // ||||||| FreeBSD since 2.2.8 - 100% Rwindows-free ********************************************************** --Boundary-00=_+IFvGlSGOm9A6VA Content-Type: text/plain; charset="us-ascii"; name="IDE.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="IDE.txt" # lobo/root [18:08:03] [~]>dmesg=20 Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD is a registered trademark of The FreeBSD Foundation. =46reeBSD 6.2-STABLE #21: Sat Aug 4 14:48:20 BRT 2007 root@lobo:/usr/src/sys/i386/compile/LOBO ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 3.20GHz (3199.66-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0xf64 Stepping =3D 4 Features=3D0xbfebfbff Features2=3D0xe4bd,> AMD Features=3D0x20100000 AMD Features2=3D0x1 Cores per package: 2 real memory =3D 1072562176 (1022 MB) avail memory =3D 1032024064 (984 MB) =46reeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 4 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi_hpet0: iomem 0xfe800000-0xfe8003ff on acp= i0 Timecounter "HPET" frequency 14318180 Hz quality 2000 acpi0: Power Button (fixed) acpi0: reservation of fe800000, 100 (3) failed Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 cpu1: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pcib2: irq 27 at device 2.0 on pci0 pci2: on pcib2 nvidia0: mem 0xdc000000-0xdcffffff,0xc0000000-0xcfffffff,= 0xdd000000-0xddffffff irq 24 at device 0.0 on pci2 nvidia0: [GIANT-LOCKED] atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,= 0xfc00-0xfc0f at device 15.0 on pci0 ata0: on atapci0 ata1: on atapci0 uhci0: port 0xf800-0xf81f at device 16.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xf400-0xf41f at device 16.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xf000-0xf01f at device 16.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xec00-0xec1f at device 16.3 on pci0 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xdffff000-0xdffff0ff at device = 16.4 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 pcib3: at device 19.1 on pci0 pci4: on pcib3 pci4: at device 3.0 (no driver attached) pcm0: port 0xdc00-0xdcff irq 19 at device 5.0 on pci4 re0: port 0xd800-0xd8f= f mem 0xdfeff000-0xdfeff0ff irq 20 at device 7.0 on pci4 miibus0: on re0 rgephy0: on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba= seT-FDX, auto re0: Ethernet address: 00:1a:92:91:29:d4 re0: [FAST] pcib4: on acpi0 pci128: on pcib4 acpi_tz0: on acpi0 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] pmtimer0 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uscanner0: Hewlett-Packard HP ScanJet 2200C, rev 1.10/1.00, addr 2 ums0: vendor 0x1241 product 0x1166, rev 1.10/2.70, addr 3, iclass 3/1 ums0: 5 buttons and Z dir. Timecounters tick every 1.000 msec ad0: 114498MB at ata0-master PIO4 ad1: 117246MB at ata0-slave PIO4 ad2: 76351MB at ata1-master PIO4 acd0: DVDR at ata1-slave PIO4 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x40 0= x00 0x01 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x40 0= x00 0x01 SMP: AP CPU #1 Launched! cd0 at ata1 bus 0 target 1 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers =2D------------------------------------------------------------------------= =2D---------- # lobo/root [18:08:03] [~]>pciconf -lv hostb0@pci0:0:0: class=3D0x060000 card=3D0x81ce1043 chip=3D0x0327110= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D HOST-PCI hostb1@pci0:0:1: class=3D0x060000 card=3D0x00000000 chip=3D0x1327110= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D HOST-PCI hostb2@pci0:0:2: class=3D0x060000 card=3D0x00000000 chip=3D0x2327110= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D HOST-PCI hostb3@pci0:0:3: class=3D0x060000 card=3D0x00000000 chip=3D0x3327110= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D HOST-PCI hostb4@pci0:0:4: class=3D0x060000 card=3D0x00000000 chip=3D0x4327110= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D HOST-PCI ioapic0@pci0:0:5: class=3D0x080020 card=3D0x00000000 chip=3D0x5327110= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D base peripheral subclass =3D interrupt controller hostb5@pci0:0:6: class=3D0x060000 card=3D0x00000000 chip=3D0x6327110= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D HOST-PCI hostb6@pci0:0:7: class=3D0x060000 card=3D0x00000000 chip=3D0x7327110= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D HOST-PCI pcib1@pci0:1:0: class=3D0x060400 card=3D0x00000000 chip=3D0xb1981106 rev=3D= 0x00 hdr=3D0x01 vendor =3D 'VIA Technologies Inc' device =3D 'ProSavageDDR P4X600 CPU to AGP Bridge' class =3D bridge subclass =3D PCI-PCI pcib2@pci0:2:0: class=3D0x060400 card=3D0xc3231106 chip=3D0xa3271106 rev=3D= 0x00 hdr=3D0x01 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D PCI-PCI atapci0@pci0:15:0: class=3D0x01018a card=3D0x81cf1043 chip=3D0x5337110= 6 rev=3D0x07 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D mass storage subclass =3D ATA uhci0@pci0:16:0: class=3D0x0c0300 card=3D0x81cf1043 chip=3D0x3038110= 6 rev=3D0xa0 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' device =3D 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class =3D serial bus subclass =3D USB uhci1@pci0:16:1: class=3D0x0c0300 card=3D0x81cf1043 chip=3D0x3038110= 6 rev=3D0xa0 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' device =3D 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class =3D serial bus subclass =3D USB uhci2@pci0:16:2: class=3D0x0c0300 card=3D0x81cf1043 chip=3D0x3038110= 6 rev=3D0xa0 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' device =3D 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class =3D serial bus subclass =3D USB uhci3@pci0:16:3: class=3D0x0c0300 card=3D0x81cf1043 chip=3D0x3038110= 6 rev=3D0xa0 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' device =3D 'VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)' class =3D serial bus subclass =3D USB ehci0@pci0:16:4: class=3D0x0c0320 card=3D0x81cf1043 chip=3D0x3104110= 6 rev=3D0x86 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' device =3D 'VT6202 USB 2.0 Enhanced Host Controller' class =3D serial bus subclass =3D USB isab0@pci0:17:0: class=3D0x060100 card=3D0x81cf1043 chip=3D0x3337110= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D PCI-ISA hostb7@pci0:17:7: class=3D0x060000 card=3D0x337e1106 chip=3D0x287e110= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D HOST-PCI hostb8@pci0:19:0: class=3D0x060000 card=3D0x00000000 chip=3D0x337b110= 6 rev=3D0x00 hdr=3D0x00 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D HOST-PCI pcib3@pci0:19:1: class=3D0x060401 card=3D0x337a1106 chip=3D0x337a110= 6 rev=3D0x00 hdr=3D0x01 vendor =3D 'VIA Technologies Inc' class =3D bridge subclass =3D PCI-PCI nvidia0@pci2:0:0: class=3D0x030000 card=3D0x22341682 chip=3D0x016a10d= e rev=3D0xa1 hdr=3D0x00 vendor =3D 'NVIDIA Corporation' class =3D display subclass =3D VGA none0@pci4:3:0: class=3D0x048000 card=3D0x0020ecc0 chip=3D0x18011057 rev=3D= 0x02 hdr=3D0x00 vendor =3D 'Motorola' device =3D 'DSP56301 24-bit Digital Signal Processor' class =3D multimedia pcm0@pci4:5:0: class=3D0x040100 card=3D0x011113f6 chip=3D0x011113f6 rev=3D= 0x10 hdr=3D0x00 vendor =3D 'C-Media Electronics Inc.' device =3D 'CMI8738/PCI C3DX It=B4s uses YMF744-B-V remarked chip' class =3D multimedia subclass =3D audio re0@pci4:7:0: class=3D0x020000 card=3D0x816710ec chip=3D0x816710ec rev=3D= 0x10 hdr=3D0x00 vendor =3D 'Realtek Semiconductor' class =3D network subclass =3D ethernet =2D------------------------------------------------------------------------= =2D---------- # lobo/root [18:08:03] [~]>atacontrol list ATA channel 0: Master: ad0 ATA/ATAPI revision 7 Slave: ad1 ATA/ATAPI revision 7 ATA channel 1: Master: ad2 ATA/ATAPI revision 7 Slave: acd0 ATA/ATAPI revision 5 =2D------------------------------------------------------------------------= =2D---------- # lobo/root [18:08:03] [~]>atacontrol cap ad0 Protocol ATA/ATAPI revision 7 device model SAMSUNG SP1203N serial number 0752J1FW943928 firmware revision TL100-23 cylinders 16383 heads 16 sectors/track 63 lba supported 234493056 sectors lba48 supported 234493056 sectors dma supported overlap not supported =46eature Support Enable Value Vendor write cache yes yes read ahead yes yes Tagged Command Queuing (TCQ) no no 0/0x00 SMART yes no microcode download yes yes security yes no power management yes yes advanced power management no no 0/0x00 automatic acoustic management yes no 0/0x00 254/0xFE =2D------------------------------------------------------------------------= =2D---------- # lobo/root [18:08:03] [~]>atacontrol cap ad1 Protocol ATA/ATAPI revision 7 device model Maxtor 6Y120L0 serial number Y41PW1VE firmware revision YAR41VW0 cylinders 16383 heads 16 sectors/track 63 lba supported 240121728 sectors lba48 not supported dma supported overlap not supported =46eature Support Enable Value Vendor write cache yes yes read ahead yes yes Tagged Command Queuing (TCQ) no no 0/0x00 SMART yes no microcode download yes yes security yes no power management yes yes advanced power management yes no 0/0x00 automatic acoustic management yes no 0/0x00 192/0xC0 =2D------------------------------------------------------------------------= =2D---------- # lobo/root [18:08:03] [~]>atacontrol cap ad2 Protocol ATA/ATAPI revision 7 device model SAMSUNG SP0802N serial number 0637J1FW598953 firmware revision TK100-23 cylinders 16383 heads 16 sectors/track 63 lba supported 156368016 sectors lba48 supported 156368016 sectors dma supported overlap not supported =46eature Support Enable Value Vendor write cache yes yes read ahead yes yes Tagged Command Queuing (TCQ) no no 0/0x00 SMART yes no microcode download yes yes security yes no power management yes yes advanced power management no no 0/0x00 automatic acoustic management yes no 0/0x00 254/0xFE =2D------------------------------------------------------------------------= =2D---------- # lobo/root [18:08:03] [~]>atacontrol cap acd0 Protocol ATA/ATAPI revision 5 device model HL-DT-ST DVDRAM GSA-4160B serial number K7G498E1619 firmware revision A304 cylinders 0 heads 0 sectors/track 0 lba supported lba48 not supported dma supported overlap not supported =46eature Support Enable Value Vendor write cache no no read ahead no no Tagged Command Queuing (TCQ) no no 0/0x00 SMART no no microcode download no no security no no power management yes no advanced power management no no 0/0x00 automatic acoustic management no no 0/0x00 0/0x00 =2D------------------------------------------------------------------------= =2D---------- Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. =46reeBSD is a registered trademark of The FreeBSD Foundation. =46reeBSD 6.2-STABLE #21: Sat Aug 4 14:48:20 BRT 2007 root@lobo:/usr/src/sys/i386/compile/LOBO Preloaded elf kernel "/boot/kernel/kernel" at 0xc10d8000. Preloaded elf module "/boot/kernel/sound.ko" at 0xc10d8188. Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc10d8234. Preloaded elf module "/boot/kernel/acpi_video.ko" at 0xc10d82e0. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc10d8390. Preloaded elf module "/boot/kernel/acpi_asus.ko" at 0xc10d843c. Preloaded elf module "/boot/modules/nvidia.ko" at 0xc10d84ec. Preloaded elf module "/boot/kernel/linux.ko" at 0xc10d8598. MP Configuration Table version 1.4 found at 0xc00f1400 Table 'FACP' at 0x3feeac80 Table 'HPET' at 0x3feeaec0 Table 'MCFG' at 0x3feeaf40 Table 'APIC' at 0x3feeadc0 MADT: Found table at 0x3feeadc0 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 0: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 1: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 2 ACPI ID 2: disabled MADT: Found CPU APIC ID 3 ACPI ID 3: disabled INTR: Adding local APIC 0 as a target ACPI APIC Table: Calibrating clock(s) ... i8254 clock: 1193222 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3199659120 Hz CPU: Intel(R) Pentium(R) D CPU 3.20GHz (3199.66-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0xf64 Stepping =3D 4 Features=3D0xbfebfbff Features2=3D0xe4bd,> AMD Features=3D0x20100000 AMD Features2=3D0x1 Cores per package: 2 real memory =3D 1072562176 (1022 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001428000 - 0x000000003ec9cfff, 1032278016 bytes (252021 pages) avail memory =3D 1032024064 (984 MB) INTR: Adding local APIC 1 as a target =46reeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00fb780 bios32: Entry =3D 0xf1d70 (c00f1d70) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0x1da0 pnpbios: Found PnP BIOS data at 0xc00fc2d0 pnpbios: Entry =3D f0000:c300 Rev =3D 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 0 APIC: CPU 1 has ACPI ID 1 MADT: Found IO APIC ID 4, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 4 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 5, Interrupt 24 at 0xfecc0000 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 2 MADT: Ignoring local NMI routed to ACPI CPU 3 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ath_rate: version 1.2 wlan: <802.11 Link Layer> kbd: new array size 4 kbd1 at kbdmux0 mem: Pentium Pro MTRR support enabled null: io: random: VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00=20 00 01 00 10 44 05 07 01 00 01 1a 01 00 01 30 01=20 00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01=20 07 01 0e 01 0f 01 11 01 12 01 14 01 15 01 17 01=20 VESA: 32 mode(s) found VESA: v3.0, 262144k memory, flags:0x1, mode table:0xc08a9782 (1000022) VESA: NVIDIA VESA: NVIDIA Corporation nv44 Board - p280h9 Chip Rev =20 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi_hpet0: iomem 0xfe800000-0xfe8003ff on acp= i0 acpi_hpet0: vend: 0x1106 rev: 0x1 num: 1 hz: 14318180 opts: leg_route Timecounter "HPET" frequency 14318180 Hz quality 2000 pci_open(1): mode 1 addr port (0x0cf8) is 0x80007804 pci_open(1a): mode1res=3D0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=3D060000] [hdr=3D80] is there (id=3D03271106) pcibios: BIOS version 3.00 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.VT86.VTSB -> bus 0 dev 17 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.P2ER -> bus 0 dev 19 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBF7.SBVL -> bus 0 dev 17 func 7 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SAPR -> bus 0 dev 15 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PATA.PAPR -> bus 0 dev 15 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.USB1.U2F0 -> bus 0 dev 16 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.USB2.U2F1 -> bus 0 dev 16 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.USB3.U2F2 -> bus 0 dev 16 func 2 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.USB4.U2F3 -> bus 0 dev 16 func 3 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.EHCI.U2F4 -> bus 0 dev 16 func 4 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PEXG.RPXG -> bus 0 dev 2 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PEX0.RPX0 -> bus 0 dev 3 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PEX1.RPX1 -> bus 0 dev 3 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PEX2.RPX2 -> bus 0 dev 3 func 2 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.PEX3.RPX3 -> bus 0 dev 3 func 3 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.P2PB.P2PR -> bus 0 dev 19 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI1.PE5C.PE5R -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI1.PE6C.PE6R -> bus 0 dev 0 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI1.AZAC.AZAR -> bus 0 dev 1 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xd9280000 pa 0x9d000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.PE5C.PE5R -> bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.PE6C.PE6R -> bus 0 dev 0 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.P2PE.AZAC.AZAR -> bus 0 dev 1 func 0 acpi0: reservation of fe800000, 100 (3) failed ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 6 7 10 11 12 Validation 0 11 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 Validation 0 255 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 6 7 10 11 12 Validation 0 10 N 0 3 4 6 7 10 11 12 After Disable 0 255 N 0 3 4 6 7 10 11 12 cpu0: on acpi0 cpu0: switching to generic Cx mode cpu1: on acpi0 acpi_button0: on acpi0 acpi_button1: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: physical bus=3D0 found-> vendor=3D0x1106, dev=3D0x0327, revid=3D0x00 bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x2210, cachelnsz=3D0 (dwords) lattimer=3D0x08 (240 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[10]: type 3, range 32, base d0000000, size 27, memory disabled found-> vendor=3D0x1106, dev=3D0x1327, revid=3D0x00 bus=3D0, slot=3D0, func=3D1 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1106, dev=3D0x2327, revid=3D0x00 bus=3D0, slot=3D0, func=3D2 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1106, dev=3D0x3327, revid=3D0x00 bus=3D0, slot=3D0, func=3D3 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1106, dev=3D0x4327, revid=3D0x00 bus=3D0, slot=3D0, func=3D4 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1106, dev=3D0x5327, revid=3D0x00 bus=3D0, slot=3D0, func=3D5 class=3D08-00-20, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D8 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1106, dev=3D0x6327, revid=3D0x00 bus=3D0, slot=3D0, func=3D6 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0006, statreg=3D0x0000, cachelnsz=3D8 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1106, dev=3D0x7327, revid=3D0x00 bus=3D0, slot=3D0, func=3D7 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1106, dev=3D0xb198, revid=3D0x00 bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0230, cachelnsz=3D8 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x14 (5000 ns), maxlat=3D0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=3D0x1106, dev=3D0xa327, revid=3D0x00 bus=3D0, slot=3D2, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D8 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x0c (3000 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit, vector masks pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 27 found-> vendor=3D0x1106, dev=3D0x5337, revid=3D0x07 bus=3D0, slot=3D15, func=3D0 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0290, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) powerspec 2 supports D0 D3 current D0 map[20]: type 4, range 32, base 0000fc00, size 4, enabled found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0xa0 bus=3D0, slot=3D16, func=3D0 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000f800, size 5, enabled found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0xa0 bus=3D0, slot=3D16, func=3D1 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000f400, size 5, enabled found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0xa0 bus=3D0, slot=3D16, func=3D2 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000f000, size 5, enabled found-> vendor=3D0x1106, dev=3D0x3038, revid=3D0xa0 bus=3D0, slot=3D16, func=3D3 class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dd, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[20]: type 4, range 32, base 0000ec00, size 5, enabled found-> vendor=3D0x1106, dev=3D0x3104, revid=3D0x86 bus=3D0, slot=3D16, func=3D4 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base dffff000, size 8, enabled found-> vendor=3D0x1106, dev=3D0x3337, revid=3D0x00 bus=3D0, slot=3D17, func=3D0 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0003, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) powerspec 2 supports D0 D3 current D0 found-> vendor=3D0x1106, dev=3D0x287e, revid=3D0x00 bus=3D0, slot=3D17, func=3D7 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0000, statreg=3D0x2210, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1106, dev=3D0x337b, revid=3D0x00 bus=3D0, slot=3D19, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0007, statreg=3D0x2010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1106, dev=3D0x337a, revid=3D0x00 bus=3D0, slot=3D19, func=3D1 class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x2010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns) pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xfff00000-0xfffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: on pcib1 pci1: physical bus=3D1 pcib2: irq 27 at device 2.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xdc000000-0xdeffffff pcib2: prefetched decode 0xc0000000-0xcfffffff pci2: on pcib2 pci2: physical bus=3D2 found-> vendor=3D0x10de, dev=3D0x016a, revid=3D0xa1 bus=3D2, slot=3D0, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x0010, cachelnsz=3D8 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base dc000000, size 24, enabled pcib2: requested memory range 0xdc000000-0xdcffffff: good map[14]: type 3, range 64, base c0000000, size 28, enabled pcib2: requested memory range 0xc0000000-0xcfffffff: good map[1c]: type 1, range 64, base dd000000, size 24, enabled pcib2: requested memory range 0xdd000000-0xddffffff: good pcib2: matched entry for 2.0.INTA pcib2: slot 0 INTA hardwired to IRQ 24 nvidia0: mem 0xdc000000-0xdcffffff,0xc0000000-0xcfffffff,= 0xdd000000-0xddffffff irq 24 at device 0.0 on pci2 nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xdc000000 nvidia0: Reserved 0x10000000 bytes for rid 0x14 type 3 at 0xc0000000 nvidia0: Reserved 0x1000000 bytes for rid 0x1c type 3 at 0xdd000000 ioapic1: routing intpin 0 (PCI IRQ 24) to vector 49 nvidia0: [GIANT-LOCKED] atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,= 0xfc00-0xfc0f at device 15.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D50 ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: stat1=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata0: reset tp2 stat0=3D50 stat1=3D50 devices=3D0x3 ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50 ata0: [MPSAFE] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata1: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata1: stat1=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb ata1: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x9 ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51 ata1: [MPSAFE] uhci0: port 0xf800-0xf81f at device 16.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf800 pcib0: matched entry for 0.16.INTA pcib0: slot 16 INTA hardwired to IRQ 20 ioapic0: routing intpin 20 (PCI IRQ 20) to vector 52 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xf400-0xf41f at device 16.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf400 pcib0: matched entry for 0.16.INTB pcib0: slot 16 INTB hardwired to IRQ 22 ioapic0: routing intpin 22 (PCI IRQ 22) to vector 53 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xf000-0xf01f at device 16.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xf000 pcib0: matched entry for 0.16.INTC pcib0: slot 16 INTC hardwired to IRQ 21 ioapic0: routing intpin 21 (PCI IRQ 21) to vector 54 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xec00-0xec1f at device 16.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xec00 pcib0: matched entry for 0.16.INTD pcib0: slot 16 INTD hardwired to IRQ 23 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 55 uhci3: [GIANT-LOCKED] usb3: on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xdffff000-0xdffff0ff at device = 16.4 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xdffff000 pcib0: matched entry for 0.16.INTC pcib0: slot 16 INTC hardwired to IRQ 21 ehci0: [GIANT-LOCKED] ehci0: Dropped interrupts workaround enabled usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered isab0: at device 17.0 on pci0 isa0: on isab0 pcib3: at device 19.1 on pci0 pcib3: secondary bus 4 pcib3: subordinate bus 4 pcib3: I/O decode 0xd000-0xdfff pcib3: memory decode 0xdfe00000-0xdfefffff pcib3: prefetched decode 0xfff00000-0xfffff pcib3: Subtractively decoded bridge. pci4: on pcib3 pci4: physical bus=3D4 found-> vendor=3D0x1057, dev=3D0x1801, revid=3D0x02 bus=3D4, slot=3D3, func=3D0 class=3D04-80-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0280, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 map[10]: type 1, range 32, base dfee0000, size 16, enabled pcib3: requested memory range 0xdfee0000-0xdfeeffff: good found-> vendor=3D0x13f6, dev=3D0x0111, revid=3D0x10 bus=3D4, slot=3D5, func=3D0 class=3D04-01-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0085, statreg=3D0x0210, cachelnsz=3D0 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x02 (500 ns), maxlat=3D0x18 (6000 ns) intpin=3Da, irq=3D5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000dc00, size 8, enabled pcib3: requested I/O range 0xdc00-0xdcff: in range pcib3: matched entry for 4.5.INTA pcib3: slot 5 INTA hardwired to IRQ 19 found-> vendor=3D0x10ec, dev=3D0x8167, revid=3D0x10 bus=3D4, slot=3D7, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0007, statreg=3D0x02b0, cachelnsz=3D8 (dwords) lattimer=3D0x20 (960 ns), mingnt=3D0x20 (8000 ns), maxlat=3D0x40 (16000 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000d800, size 8, enabled pcib3: requested I/O range 0xd800-0xd8ff: in range map[14]: type 1, range 32, base dfeff000, size 8, enabled pcib3: requested memory range 0xdfeff000-0xdfeff0ff: good pcib3: matched entry for 4.7.INTA pcib3: slot 7 INTA hardwired to IRQ 20 pci4: at device 3.0 (no driver attached) pcm0: port 0xdc00-0xdcff irq 19 at device 5.0 on pci4 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdc00 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 56 pcm0: [MPSAFE] pcm0: Mixer "vol": pcm0: Mixer "bass": pcm0: Mixer "treble": pcm0: Mixer "synth": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "monitor": pcm0: sndbuf_setmap 3e8d0000, 4000; 0xe57a3000 -> 3e8d0000 pcm0: sndbuf_setmap 3e8cc000, 4000; 0xe57a7000 -> 3e8cc000 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd800 pcib3: re0 requested I/O range 0xd800-0xd8ff: in range re0: port 0xd800-0xd8f= f mem 0xdfeff000-0xdfeff0ff irq 20 at device 7.0 on pci4 pcib3: re0 requested I/O range 0xd800-0xd8ff: in range miibus0: on re0 rgephy0: on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba= seT-FDX, auto re0: bpf attached re0: Ethernet address: 00:1a:92:91:29:d4 re0: [MPSAFE] re0: [FAST] pcib4: on acpi0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: \\_SB_.PCI0.VT86.BDRE -> bus 0 dev 17 func 0 pci128: on pcib4 pci128: physical bus=3D128 acpi_tz0: on acpi0 fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: ic_type 90 part_id 80 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57 fdc0: [MPSAFE] fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0xc061 0xc061 0xc061 0xc061 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0067 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 59 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it ex_isa_identify() isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) mpu0 failed to probe at port 0x300 irq 5 on isa0 ppc0 failed to probe at irq 7 on isa0 fb: new array size 4 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices uscanner0: Hewlett-Packard HP ScanJet 2200C, rev 1.10/1.00, addr 2 ums0: vendor 0x1241 product 0x1166, rev 1.10/2.70, addr 3, iclass 3/1 ums0: 5 buttons and Z dir. Device configuration finished. procfs registered lapic: Divisor 2, Frequency 99989344 hz Timecounter "TSC" frequency 3199659120 Hz quality -100 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached ata0-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D80 wire ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire ad0: 114498MB at ata0-master PIO4 ad0: 234493056 sectors [232632C/16H/63S] 16 sectors/interrupt 1 depth queue ad0: VIA check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ad1: 117246MB at ata0-slave PIO4 ad1: 240121728 sectors [238216C/16H/63S] 16 sectors/interrupt 1 depth queue ad1: VIA check1 failed ad1: Adaptec check1 failed ad1: LSI (v3) check1 failed ad1: LSI (v2) check1 failed ad1: FreeBSD check1 failed ata1-slave: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA66 cable=3D80 wire ata1-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D80 wire ad2: 76351MB at ata1-master PIO4 ad2: 156368016 sectors [155127C/16H/63S] 16 sectors/interrupt 1 depth queue ad2: VIA check1 failed ad2: Adaptec check1 failed ad2: LSI (v3) check1 failed ad2: LSI (v2) check1 failed ad2: FreeBSD check1 failed acd0: DVDR drive at ata1 as slave acd0: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, PI= O4 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc GEOM: new disk ad0 GEOM: new disk ad1 GEOM: new disk ad2 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x40 0= x00 0x01 (probe0:ata1:0:1:0): error 22 (probe0:ata1:0:1:0): Unretryable Error (probe0:ata1:0:1:0): error 6 (probe0:ata1:0:1:0): Unretryable Error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=3D0x24 ascq=3D0x00 sks=3D0x40 0= x00 0x01 (probe0:ata1:0:1:0): error 22 (probe0:ata1:0:1:0): Unretryable Error pass0 at ata1 bus 0 target 1 lun 0 pass0: Removable CD-ROM SCSI-0 device=20 pass0: 16.000MB/s transfers GEOM: new disk cd0 ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 6 to local APIC 0 ioapic0: Assigning ISA IRQ 9 to local APIC 1 ioapic0: Assigning ISA IRQ 14 to local APIC 0 ioapic0: Assigning ISA IRQ 15 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 20 to local APIC 1 ioapic0: Assigning PCI IRQ 21 to local APIC 0 ioapic0: Assigning PCI IRQ 22 to local APIC 1 ioapic0: Assigning PCI IRQ 23 to local APIC 0 ioapic1: Assigning PCI IRQ 24 to local APIC 1 (cd0:ata1:0:1:0): error 6 (cd0:ata1:0:1:0): Unretryable Error cd0 at ata1 bus 0 target 1 lun 0 cd0: Removable CD-ROM SCSI-0 device=20 cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present (cd0:ata1:0:1:0): error 6 (cd0:ata1:0:1:0): Unretryable Error (cd0:ata1:0:1:0): error 6 (cd0:ata1:0:1:0): Unretryable Error (cd0:ata1:0:1:0): error 6 (cd0:ata1:0:1:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s4a start_init: trying /sbin/init Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point kickstart =2E swapon: adding /dev/ad1s2b as swap device Starting file system checks: /dev/ad0s4a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s4a: clean, 5101212 free (6140 frags, 636884 blocks, 0.1% fragmenta= tion) /dev/ad0s4d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad1s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad1s2e: clean, 9475107 free (227355 frags, 1155969 blocks, 1.0% fragme= ntation) /dev/ad2s4e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad2s4e: clean, 5064171 free (355 frags, 632977 blocks, 0.0% fragmentat= ion) /dev/ad0s4d: clean, 540528 free (208 frags, 67540 blocks, 0.0% fragmentatio= n) /dev/ad1s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad1s2d: clean, 1757665 free (6793 frags, 218859 blocks, 0.3% fragmenta= tion) /dev/ad0s1: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad2s4d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad2s4d: clean, 991388 free (60 frags, 123916 blocks, 0.0% fragmentatio= n) /dev/ad2s1: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad2s2: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad1s1: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s2: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad1s4: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3: FILESYSTEM CLEAN; SKIPPING CHECKS /dev/ad1s3: FILESYSTEM CLEAN; SKIPPING CHECKS Mounting local file systems: =2E Setting hostname: lobo. net.inet.tcp.blackhole:=20 0 ->=20 1 net.inet.udp.blackhole:=20 0 ->=20 1 net.inet.udp.maxdgram:=20 9216 ->=20 63535 kern.maxfiles:=20 12328 ->=20 65536 kern.ipc.somaxconn:=20 128 ->=20 4096 kern.ipc.shmmax:=20 33554432 ->=20 50331648 kern.ipc.shmall:=20 8192 ->=20 16384 hw.snd.pcm0.vchans:=20 1 ->=20 4 lo0: flags=3D8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000=20 re0: flags=3D8843 mtu 1500 options=3D5b inet 10.10.10.2 netmask 0xffffff00 broadcast 10.10.10.255 ether 00:1a:92:91:29:d4 media: Ethernet autoselect (none) status: no carrier add net default: gateway 10.10.10.1 Additional routing options: =2E Starting devd. Starting ums0 moused: =2E hw.acpi.cpu.cx_lowest:=20 C1 sysctl:=20 hw.acpi.cpu.cx_lowest :=20 Invalid argument Mounting NFS file systems: =2E Mounting SMB file systems: netsmb_dev: loaded =2E ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/= lib /usr/local/lib/compat/pkg /usr/X11R6/lib /usr/X11R6/lib/evolution/2.6 /= usr/local/lib /usr/local/lib/ardour2 /usr/local/lib/ardour2/surfaces /usr/l= ocal/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/graphviz /usr/loca= l/lib/kde3 /usr/local/lib/mplayer/vidix /usr/local/lib/mysql /usr/local/lib= /nss /usr/local/lib/pth /usr/local/lib/wine /usr/X11R6/lib /usr/X11R6/lib/e= volution/2.6 /usr/local/lib /usr/local/lib/ardour2 /usr/local/lib/ardour2/s= urfaces /usr/local/lib/compat /usr/local/lib/compat/pkg /usr/local/lib/grap= hviz /usr/local/lib/kde3 /usr/local/lib/mplayer/vidix /usr/local/lib/mysql = /usr/local/lib/nss /usr/local/lib/pth /usr/local/lib/wine a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /etc/ld.so.conf Clearing /tmp. Creating and/or trimming log files: =2E Starting syslogd. Initial i386 initialization: =2E Additional ABI support: linux =2E Starting local daemons: =2E Updating motd =2E Mounting late file systems: =2E Starting usbd. Starting cupsd. Removing stale Samba tdb files:=20 done Configuring syscons: keymap font8x16 font8x14 font8x8 blanktime allscreens =2E Starting cron. Local package initialization: rtc =2E Additional TCP options: =2E Starting background file system checks in 60 seconds. Thu Aug 9 19:50:47 BRT 2007 Aug 9 20:25:08 lobo login: ROOT LOGIN (root) ON ttyv0 --Boundary-00=_+IFvGlSGOm9A6VA--