Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 14 May 2004 16:44:19 +0200
From:      Frank Altpeter <frank@altpeter.de>
To:        freebsd-mobile@freebsd.org
Subject:   5.2-STABLE with NEWCARD hangup
Message-ID:  <20040514144419.GA94318@murphy.planlos.de>

next in thread | raw e-mail | index | archive | help
Hi there,

I already mailed that problem to -questions, but after some research
i thought it would make sense to repost it here.

I own a Compaq Armada E500 notebook, which is providing two PCMCIA
slots - according to dmesg it's that:

---------------------- <cut> -------------------------
cbb0: <TI1225 PCI-CardBus Bridge> mem 0x41100000-0x41100fff irq 11 at device 4.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x41100000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
---------------------- </cut> -------------------------

Well, when inserting a Lucent wireless LAN card after setting
cbb.debug sysctl, this is the result:

kernel: Status is 0x30000510
kernel: cbb1: card inserted: event=0x00000000, state=30000510
kernel: cbb_pcic_socket_enable:
kernel: cbb1: cbb_power: 5V
kernel: pccard1: CIS version PC Card Standard 5.0
kernel: pccard1: CIS info: Lucent Technologies, WaveLAN/IEEE, Version 01.01, 
kernel: pccard1: Manufacturer code 0x156, product 0x2
kernel: pccard1: function 0: network adapter, ccr addr 3e0 mask 1
kernel: pccard1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
kernel: cbb_pcic_socket_enable:
kernel: cbb1: cbb_power: 0V
kernel: cbb1: cbb_power: 5V
kernel: wi0: <Lucent Technologies WaveLAN/IEEE> at port 0x100-0x13f irq 11 function 0 config 1 on pccard1
kernel: wi0: [GIANT-LOCKED]
kernel: wi0: timeout in wi_cmd 0x0000; event status 0x8000
kernel: wi0: timeout in wi_cmd 0x0000; event status 0x8000
kernel: wi0: timeout in wi_cmd 0x0000; event status 0x8000
kernel: : init failed
kernel: device_probe_and_attach: wi0 attach returned 6

But quite more strange is, the complete system does hangup if i
insert a CompactFlash card adapter. There is nothing in the log to
report.

Both cards were working fine with OLDCARD style on FreeBSD 4.10.

I quite new to NEWCARD and devd, so any hints welcome.

With kind regards,

	Frank Altpeter

-- 
FA-RIPE - racoon@IRCNET - 6133423@ICQ
Member of the Open Business Club - http://www.openbc.com/
|Intelligenzbestien des Fussballs, heute: Ludwig Kögl
|Entweder ich gehe links vorbei, oder ich gehe rechts vorbei.



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040514144419.GA94318>