Date: Thu, 12 Jan 2006 15:54:41 -0500 (EST) From: "kalin mintchev" <kalin@el.net> To: freebsd-mobile@freebsd.org Subject: Re: missing /dev/dsp Message-ID: <54229.24.90.33.115.1137099281.squirrel@mail.el.net> In-Reply-To: <60246.24.90.33.115.1137092322.squirrel@mail.el.net> References: Your message of "Thu, 12 Jan 2006 03:26:18 EST." <50526.24.90.33.115.1137054378.squirrel@mail.el.net> <20060112161935.C53DF5D04@ptavv.es.net> <60246.24.90.33.115.1137092322.squirrel@mail.el.net>
next in thread | previous in thread | raw e-mail | index | archive | help
------=_20060112155441_55323 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit hi ... here i'm attaching my dmesg if somebody would like to take a look. i don't see it but i might be wrong... thanks... > >>> Date: Thu, 12 Jan 2006 03:26:18 -0500 (EST) >>> From: "kalin mintchev" <kalin@el.net> >>> Sender: owner-freebsd-mobile@freebsd.org >>> >>> >>> hi all.. >>> >>> i sent my t30 to ibm to replace a not working ram slot and i got it >>> back >>> in less then 48 hrs. pretty good. except the /dev/dsp is missing. >>> >>> i don't see any cards in the dmesg but i know that the audio card is >>> "SoundBlaster compatible". my system is 5.4 and according to the >>> handbook >>> devfs should figure it out - i haven't had to do this before... >>> a have the audio enabled in the kernel... pcm... >>> >>> any ideas why is the dsp missing? i think they did bios upgrade - is >>> that >>> what screwed it up? >> >> A dmesg would be helpful as would kldstat and kernel config. > > i don't really see it in the dmesg. and the pciconf says it's not there > either.... > for kldstat i have: > o# kldstat > Id Refs Address Size Name > 1 9 0xc0400000 5e73f4 kernel > 2 1 0xc09e8000 5884 snd_ich.ko > 3 14 0xc09ee000 56270 acpi.ko > 4 1 0xc2767000 17000 linux.ko > > i'm thinking the card is screwed up somewhere internally... thanks... > >> The obvious question is whether your kernel includes 'device sound' and >> 'device snd_ich' or kldstat shows them loaded. You might want to do a >> 'pciconf -lv' and look for what device is in class 'multimedia' and >> subclass 'audio'. You may also need drivers for the System Management >> bus: >> device smbus >> device iicbus >> device iicbb >> device intpm >> device ichsmb >> device smb >> >> Not really sure of exactly which are needed. >> -- >> R. Kevin Oberman, Network Engineer >> Energy Sciences Network (ESnet) >> Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab) >> E-mail: oberman@es.net Phone: +1 510 486-8634 >> > > > -- > > > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org" > -- ------=_20060112155441_55323 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-RELEASE #0: Mon Aug 15 20:16:14 EDT 2005 root@reterdo.el.net:/usr/obj/usr/src/sys/K01 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.20GHz (2192.90-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 1073152000 (1023 MB) avail memory = 1040596992 (992 MB) npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <IBM TP-1I> on motherboard acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x66,0x62 on acpi0 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0 usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0 usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0 usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 cbb0: <TI1520 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 0.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <TI1520 PCI-CardBus Bridge> mem 0x51000000-0x51000fff irq 11 at device 0.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 wi0: <Intersil Prism2.5> mem 0xf8000000-0xf8000fff irq 11 at device 2.0 on pci2 wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI) wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.9) wi0: Ethernet address: 00:05:3c:09:82:a3 wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x7000-0x703f mem 0xd0200000-0xd0200fff irq 11 at device 8.0 on pci2 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:09:6b:7c:62:f7 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 8250 or not responding ppc0: <Standard parallel printer port> port 0x3bc-0x3be irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2192896992 Hz quality 800 Timecounters tick every 10.000 msec ad0: 57277MB <SAMSUNG MP0603H/UD100-14> [116374/16/63] at ata0-master UDMA100 acd0: DVDROM <TOSHIBA DVD-ROM SD-C2512/1115> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a ------=_20060112155441_55323--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?54229.24.90.33.115.1137099281.squirrel>