Date: Fri, 16 Jun 2017 00:44:23 +0000 (UTC) From: Adrian Chadd <adrian@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r319994 - head/sys/mips/conf Message-ID: <201706160044.v5G0iNbg063006@repo.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: adrian Date: Fri Jun 16 00:44:23 2017 New Revision: 319994 URL: https://svnweb.freebsd.org/changeset/base/319994 Log: [ar71xx] migrate all of the duplicate configuration out into a shared config file. This brings the default configurations (drivers, net80211 settings, etc) and some of the shared configuration into std.AR_MIPS_BASE. I haven't yet moved the -current settings (witness, memguard, etc) into it. This should simplify building a lot of the same test images for my MIPS AP board development and testing. This is a work in progress; it's not designed to be perfect! Added: head/sys/mips/conf/std.AR_MIPS_BASE (contents, props changed) Modified: head/sys/mips/conf/AP135 head/sys/mips/conf/AR71XX_BASE head/sys/mips/conf/QCA953X_BASE head/sys/mips/conf/std.AR724X head/sys/mips/conf/std.AR91XX head/sys/mips/conf/std.AR933X head/sys/mips/conf/std.AR934X head/sys/mips/conf/std.QCA955X Modified: head/sys/mips/conf/AP135 ============================================================================== --- head/sys/mips/conf/AP135 Fri Jun 16 00:00:01 2017 (r319993) +++ head/sys/mips/conf/AP135 Fri Jun 16 00:44:23 2017 (r319994) @@ -58,13 +58,9 @@ device geom_map device pci device qca955x_pci -device ath_pci -options AR71XX_ATH_EEPROM device firmware # Used by the above +options AR71XX_ATH_EEPROM options ATH_EEPROM_FIRMWARE # Boot off of the rootfs, as defined in the geom_map setup. options ROOTDEVNAME=\"ufs:map/rootfs.uzip\" - -# Default to accept -options IPFIREWALL_DEFAULT_TO_ACCEPT Modified: head/sys/mips/conf/AR71XX_BASE ============================================================================== --- head/sys/mips/conf/AR71XX_BASE Fri Jun 16 00:00:01 2017 (r319993) +++ head/sys/mips/conf/AR71XX_BASE Fri Jun 16 00:44:23 2017 (r319994) @@ -22,13 +22,6 @@ hints "AR71XX_BASE.hints" makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols -# Build these as modules so small platform builds will have the -# modules already built. -makeoptions MODULES_OVERRIDE="gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci" - -# For small memory footprints -options VM_KMEM_SIZE_SCALE=1 - options DDB options KDB @@ -57,75 +50,19 @@ options FFS #Berkeley Fast # options UFS_DIRHASH #Improve performance on big directories # options MSDOSFS # Read MSDOS filesystems; useful for USB/CF +include "std.AR_MIPS_BASE" +makeoptions MODULES_OVERRIDE+="hwpmc_mips24k" + device pci device ar71xx_pci -# 802.11 framework -options IEEE80211_DEBUG -options IEEE80211_ALQ -options IEEE80211_SUPPORT_MESH -options IEEE80211_SUPPORT_TDMA -options IEEE80211_AMPDU_AGE -device wlan # 802.11 support -device wlan_wep # 802.11 WEP support -device wlan_ccmp # 802.11 CCMP support -device wlan_tkip # 802.11 TKIP support -device wlan_xauth # 802.11 hostap support - -# Atheros wireless NICs -device ath # Atheros interface support -device ath_pci # Atheros PCI/Cardbus bus -options ATH_DEBUG -options ATH_DIAGAPI -options ATH_ENABLE_11N -options AH_DEBUG -options AH_DEBUG_ALQ -options ALQ -device ath_hal -option AH_SUPPORT_AR5416 -device ath_rate_sample -option AH_RXCFG_SDMAMW_4BYTES -option AH_AR5416_INTERRUPT_MITIGATION -# There's no DFS radar detection support yet so this won't actually -# detect radars. It however does enable the rest of the channel change -# machinery so DFS can be debugged. -option ATH_ENABLE_DFS - -device mii -device arge - device usb -options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order -options USB_DEBUG -options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this device ehci device scbus device umass device da -# On-board SPI flash -device spibus -device ar71xx_spi -device mx25l device ar71xx_wdog - -device uart device uart_ar71xx - device ar71xx_apb - -device loop -device ether -device md -device bpf -device random -device if_bridge -device gif # ip[46] in ip[46] tunneling protocol -device gre # generic encapsulation - only for IPv4 in IPv4 though atm - -options ARGE_DEBUG # Enable if_arge debugging for now - -# Enable GPIO -device gpio -device gpioled Modified: head/sys/mips/conf/QCA953X_BASE ============================================================================== --- head/sys/mips/conf/QCA953X_BASE Fri Jun 16 00:00:01 2017 (r319993) +++ head/sys/mips/conf/QCA953X_BASE Fri Jun 16 00:44:23 2017 (r319994) @@ -26,7 +26,6 @@ options DDB options KDB options ALQ options BREAK_TO_DEBUGGER -options ALT_BREAK_TO_DEBUGGER options SCHED_4BSD #4BSD scheduler options INET #InterNETworking @@ -36,32 +35,9 @@ options TCP_HHOOK # hhook(9) framework for TCP options PSEUDOFS #Pseudo-filesystem framework options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions -# Don't include the SCSI/CAM strings in the default build -options SCSI_NO_SENSE_STRINGS -options SCSI_NO_OP_STRINGS - -# .. And no sysctl strings -options NO_SYSCTL_DESCR - -# For small memory footprints -options VM_KMEM_SIZE_SCALE=1 - -# Limit IO size -options NBUF=128 - -# Limit UMTX hash size -# options UMTX_NUM_CHAINS=64 - -#options UMA_DEBUG_ALLOC - # PMC options HWPMC_HOOKS -#options HWPMC_MIPS_BACKTRACE -device hwpmc -device hwpmc_mips24k -options ARGE_DEBUG - # options NFS_LEGACYRPC # Debugging for use in -current options INVARIANTS @@ -74,66 +50,21 @@ options FFS #Berkeley Fast Filesy #options UFS_DIRHASH #Improve performance on big directories options NO_FFS_SNAPSHOT # We don't require snapshot support -options IPFIREWALL_DEFAULT_TO_ACCEPT +include "std.AR_MIPS_BASE" +makeoptions MODULES_OVERRIDE+="hwpmc_mips24k" -# Wireless NIC cards -options IEEE80211_DEBUG -options IEEE80211_SUPPORT_MESH -options IEEE80211_SUPPORT_TDMA -options IEEE80211_SUPPORT_SUPERG -options IEEE80211_ALQ # 802.11 ALQ logging support -device wlan # 802.11 support -device wlan_wep # 802.11 WEP support -device wlan_ccmp # 802.11 CCMP support -device wlan_tkip # 802.11 TKIP support -device wlan_xauth # 802.11 hostap support - -# ath(4) -device ath # Atheros network device -device ath_rate_sample -device ath_ahb # Atheros host bus glue -options ATH_DEBUG -options ATH_DIAGAPI -option ATH_ENABLE_11N -option AH_DEBUG_ALQ - -#device ath_hal -device ath_ar9300 # AR9330 HAL; no need for the others -option AH_DEBUG -option AH_SUPPORT_AR5416 # 11n HAL support option AH_SUPPORT_QCA9530 # Chipset support -option AH_AR5416_INTERRUPT_MITIGATION -device mii -device arge - device usb -options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order -options USB_DEBUG -options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this device ehci device scbus device umass device da -device spibus -device ar71xx_spi -device mx25l -device ar71xx_wdog - # Handle 25MHz refclock by allowing a higher baudrate error tolerance. -device uart device uart_ar71xx options UART_DEV_TOLERANCE_PCT=50 device ar71xx_apb -device loop -device ether -device md -device bpf -device random -device if_bridge -device gpio -device gpioled Modified: head/sys/mips/conf/std.AR724X ============================================================================== --- head/sys/mips/conf/std.AR724X Fri Jun 16 00:00:01 2017 (r319993) +++ head/sys/mips/conf/std.AR724X Fri Jun 16 00:44:23 2017 (r319994) @@ -23,13 +23,6 @@ hints "AR724X_BASE.hints" makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols -# Build these as modules so small platform builds will have the -# modules already built. -makeoptions MODULES_OVERRIDE="gpio ar71xx if_gif if_gre if_tap if_tun libalias ipfw ipfw_nat ipfw_nptv6 if_vlan if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath_main ath_pci ath_hal ath_hal_ar5212 ath_hal_ar5416 ath_hal_ar9300 ath_rate ath_dfs hwpmc hwpmc_mips24k cam" - -# For small memory footprints -options VM_KMEM_SIZE_SCALE=1 - options DDB options KDB options EARLY_PRINTF @@ -42,6 +35,10 @@ options TCP_HHOOK # hhook(9) framework for TCP options PSEUDOFS #Pseudo-filesystem framework options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions +# PMC +options HWPMC_HOOKS + + #options NFS_LEGACYRPC # Debugging for use in -current options INVARIANTS @@ -51,95 +48,27 @@ options WITNESS_SKIPSPIN options DEBUG_REDZONE options DEBUG_MEMGUARD -# Don't include the SCSI/CAM strings in the default build -options SCSI_NO_SENSE_STRINGS -options SCSI_NO_OP_STRINGS - -# .. And no sysctl strings -options NO_SYSCTL_DESCR - options FFS #Berkeley Fast Filesystem options NO_FFS_SNAPSHOT -options IPFIREWALL_DEFAULT_TO_ACCEPT - # options SOFTUPDATES #Enable FFS soft updates support # options UFS_ACL #Support for access control lists # options UFS_DIRHASH #Improve performance on big directories # options MSDOSFS # Read MSDOS filesystems; useful for USB/CF -options UMTX_CHAINS=16 +include "std.AR_MIPS_BASE" +makeoptions MODULES_OVERRIDE+="hwpmc_mips24k" + device pci device ar724x_pci -# 802.11 framework -options IEEE80211_DEBUG -options IEEE80211_ALQ -options IEEE80211_SUPPORT_MESH -options IEEE80211_SUPPORT_SUPERG -options IEEE80211_SUPPORT_TDMA -options IEEE80211_AMPDU_AGE -#device wlan # 802.11 support -#device wlan_wep # 802.11 WEP support -#device wlan_ccmp # 802.11 CCMP support -#device wlan_tkip # 802.11 TKIP support -#device wlan_xauth # 802.11 hostap support +device usb +device ehci -# Atheros wireless NICs -#device ath # Atheros interface support -#device ath_pci # Atheros PCI/Cardbus bus -options ATH_DEBUG -options ATH_DIAGAPI -options ATH_ENABLE_11N -options AH_DEBUG -options AH_DEBUG_ALQ -options ALQ -#device ath_hal -option AH_SUPPORT_AR5416 -#device ath_rate_sample -option AH_RXCFG_SDMAMW_4BYTES -option AH_AR5416_INTERRUPT_MITIGATION -# There's no DFS radar detection support yet so this won't actually -# detect radars. It however does enable the rest of the channel change -# machinery so DFS can be debugged. -option ATH_ENABLE_DFS - -device mii -device arge -options ARGE_DEBUG # Enable if_arge debugging for now - -#device usb -options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order -options USB_DEBUG -options USB_HOST_ALIGN=32 # AR724X (MIPS in general?) requires this -#device ehci - -#device umass - +device umass device scbus device da -# On-board SPI flash -device spibus -device ar71xx_spi -device mx25l -device ar71xx_wdog - -device uart device uart_ar71xx - device ar71xx_apb - -device loop -device ether -device md -device bpf -device random -#device if_bridge -#device gif # ip[46] in ip[46] tunneling protocol -#device gre # generic encapsulation - only for IPv4 in IPv4 though atm - -# Enable GPIO -#device gpio -#device gpioled Modified: head/sys/mips/conf/std.AR91XX ============================================================================== --- head/sys/mips/conf/std.AR91XX Fri Jun 16 00:00:01 2017 (r319993) +++ head/sys/mips/conf/std.AR91XX Fri Jun 16 00:44:23 2017 (r319994) @@ -20,15 +20,11 @@ files "../atheros/files.ar71xx" hints "AR91XX_BASE.hints" makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols -makeoptions MODULES_OVERRIDE="gpio ar71xx if_gif if_gre if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr ath ath_ahb hwpmc" options DDB options KDB options ALQ -# For small memory footprints -options VM_KMEM_SIZE_SCALE=1 - options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 #InterNETworking @@ -39,8 +35,6 @@ options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B r # PMC options HWPMC_HOOKS -device hwpmc -device hwpmc_mips24k # options NFS_LEGACYRPC # Debugging for use in -current @@ -54,70 +48,18 @@ options FFS #Berkeley Fast Filesy #options UFS_DIRHASH #Improve performance on big directories options NO_FFS_SNAPSHOT # We don't require snapshot support -# Wireless NIC cards -options IEEE80211_DEBUG -options IEEE80211_SUPPORT_MESH -options IEEE80211_SUPPORT_TDMA -options IEEE80211_ALQ # 802.11 ALQ logging support -device wlan # 802.11 support -device wlan_wep # 802.11 WEP support -device wlan_ccmp # 802.11 CCMP support -device wlan_tkip # 802.11 TKIP support -device wlan_xauth # 802.11 hostap support +include "std.AR_MIPS_BASE" -# ath(4) -device ath # Atheros network device -device ath_rate_sample -device ath_ahb # Atheros host bus glue -options ATH_DEBUG -options ATH_DIAGAPI -option ATH_ENABLE_11N - -# Don't bother compiling the whole HAL - AH_SUPPORT_AR9130 breaks the -# rest of the 11n chipset support at the moment and the pre-AR5212 -# HALs aren't required. -# device ath_hal - -# The AR9130 code requires AR5416; and AR5416 requires the AR5212 code. -device ath_ar5212 -device ath_ar5416 -device ath_ar9130 - -options AH_DEBUG -option AH_SUPPORT_AR5416 option AH_SUPPORT_AR9130 # Makes other chipsets not function! -option AH_DEBUG_ALQ # interrupt mitigation not possible on AR9130 -# option AH_AR5416_INTERRUPT_MITIGATION +nooption AH_AR5416_INTERRUPT_MITIGATION -device mii -device arge - device usb -options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order -options USB_DEBUG -options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this device ehci device scbus device umass device da -device spibus -device ar71xx_spi -device mx25l -device ar71xx_wdog - -device uart device uart_ar71xx - device ar71xx_apb - -device loop -device ether -device md -device bpf -device random -device if_bridge -device gpio -device gpioled Modified: head/sys/mips/conf/std.AR933X ============================================================================== --- head/sys/mips/conf/std.AR933X Fri Jun 16 00:00:01 2017 (r319993) +++ head/sys/mips/conf/std.AR933X Fri Jun 16 00:44:23 2017 (r319994) @@ -20,15 +20,11 @@ files "../atheros/files.ar71xx" hints "AR933X_BASE.hints" makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols -makeoptions MODULES_OVERRIDE="gpio ar71xx if_gif if_vlan if_gre if_tap if_tun if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr hwpmc ipfw ipfw_nat libalias ipfw_nptv6 rtwn rtwn_usb rtwnfw otus otusfw hwpmc_mips24k" options DDB options KDB options ALQ -options ALT_BREAK_TO_DEBUGGER -options UMTX_CHAINS=16 - options SCHED_4BSD #4BSD scheduler options INET #InterNETworking #options INET6 #InterNETworking @@ -37,26 +33,8 @@ options TCP_HHOOK # hhook(9) framework for TCP options PSEUDOFS #Pseudo-filesystem framework options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions -# Don't include the SCSI/CAM strings in the default build -options SCSI_NO_SENSE_STRINGS -options SCSI_NO_OP_STRINGS - -# .. And no sysctl strings -options NO_SYSCTL_DESCR - -# For small memory footprints -options VM_KMEM_SIZE_SCALE=1 - -# Limit IO size -options NBUF=128 - -# Limit UMTX hash size -options UMTX_CHAINS=64 - # PMC options HWPMC_HOOKS -#device hwpmc -#device hwpmc_mips24k # options NFS_LEGACYRPC # Debugging for use in -current @@ -70,64 +48,18 @@ options FFS #Berkeley Fast Filesy #options UFS_DIRHASH #Improve performance on big directories options NO_FFS_SNAPSHOT # We don't require snapshot support -options IPFIREWALL_DEFAULT_TO_ACCEPT +include "std.AR_MIPS_BASE" -# Wireless NIC cards -options IEEE80211_DEBUG -options IEEE80211_SUPPORT_MESH -options IEEE80211_SUPPORT_TDMA -options IEEE80211_SUPPORT_SUPERG -options IEEE80211_ALQ # 802.11 ALQ logging support -device wlan # 802.11 support -device wlan_wep # 802.11 WEP support -device wlan_ccmp # 802.11 CCMP support -device wlan_tkip # 802.11 TKIP support -device wlan_xauth # 802.11 hostap support +makeoptions MODULES_OVERRIDE+="hwpmc_mips24k" -# ath(4) -device ath # Atheros network device -device ath_rate_sample -device ath_ahb # Atheros host bus glue -options ATH_DEBUG -options ATH_DIAGAPI -option ATH_ENABLE_11N -option AH_DEBUG_ALQ - -#device ath_hal -device ath_ar9300 # AR9330 HAL; no need for the others -option AH_DEBUG -option AH_SUPPORT_AR5416 # 11n HAL support option AH_SUPPORT_AR9330 # Chipset support -option AH_AR5416_INTERRUPT_MITIGATION -device mii -device arge - device usb -options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order -options USB_DEBUG -options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this device ehci device scbus device umass device da -device spibus -device ar71xx_spi -device mx25l -device ar71xx_wdog +device uart_ar933x -device uart -device uart_ar933x - -device ar71xx_apb - -device loop -device ether -device md -device bpf -device random -device if_bridge -device gpio -device gpioled Modified: head/sys/mips/conf/std.AR934X ============================================================================== --- head/sys/mips/conf/std.AR934X Fri Jun 16 00:00:01 2017 (r319993) +++ head/sys/mips/conf/std.AR934X Fri Jun 16 00:44:23 2017 (r319994) @@ -20,12 +20,9 @@ files "../atheros/files.ar71xx" hints "AR934X_BASE.hints" makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols -makeoptions MODULES_OVERRIDE="gpio ar71xx if_gif if_vlan if_gre if_tap if_tun if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr hwpmc ipfw ipfw_nat libalias ipfw_nptv6 rtwn rtwn_usb rtwnfw otus otusfw hwpmc_mips24k" -# makeoptions MODULES_OVERRIDE="" options DDB options KDB -options ALT_BREAK_TO_DEBUGGER options ALQ options SCHED_4BSD #4BSD scheduler @@ -36,23 +33,8 @@ options TCP_HHOOK # hhook(9) framework for TCP options PSEUDOFS #Pseudo-filesystem framework options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions -# Don't include the SCSI/CAM strings in the default build -options SCSI_NO_SENSE_STRINGS -options SCSI_NO_OP_STRINGS - -# .. And no sysctl strings -options NO_SYSCTL_DESCR - -# Limit IO size -options NBUF=128 - -# Limit UMTX hash size -options UMTX_CHAINS=64 - # PMC options HWPMC_HOOKS -#device hwpmc -#device hwpmc_mips24k # options NFS_LEGACYRPC # Debugging for use in -current @@ -66,66 +48,22 @@ options FFS #Berkeley Fast Filesy #options UFS_DIRHASH #Improve performance on big directories options NO_FFS_SNAPSHOT # We don't require snapshot support -# Wireless NIC cards -options IEEE80211_DEBUG -options IEEE80211_SUPPORT_MESH -options IEEE80211_SUPPORT_TDMA -options IEEE80211_SUPPORT_SUPERG -options IEEE80211_ALQ # 802.11 ALQ logging support -device wlan # 802.11 support -device wlan_wep # 802.11 WEP support -device wlan_ccmp # 802.11 CCMP support -device wlan_tkip # 802.11 TKIP support -device wlan_xauth # 802.11 hostap support +include "std.AR_MIPS_BASE" +makeoptions MODULES_OVERRIDE+="hwpmc_mips24k" -# ath(4) -device ath # Atheros network device -device ath_rate_sample -device ath_ahb # Atheros host bus glue -options ATH_DEBUG -options ATH_DIAGAPI -option ATH_ENABLE_11N +options AH_SUPPORT_AR9340 -#device ath_hal -device ath_ar9300 # AR9330 HAL; no need for the others -option AH_DEBUG -option AH_SUPPORT_AR5416 # 11n HAL support -option AH_SUPPORT_AR9340 # Chipset support -option AH_DEBUG_ALQ -option AH_AR5416_INTERRUPT_MITIGATION - -device mii -device arge - -device usb -options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order -options USB_DEBUG -options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this -device ehci - device pci device ar724x_pci - -device scbus -device umass -device da - -device spibus -device ar71xx_spi -device mx25l -device ar71xx_wdog - -device uart device uart_ar71xx # XXX for now; later a separate APB mux is needed to demux PCI/WLAN interrupts. device ar71xx_apb -device loop -device ether -device md -device bpf -device random -device if_bridge -device gpio -device gpioled +device usb +device ehci + +device scbus +device umass +device da + Added: head/sys/mips/conf/std.AR_MIPS_BASE ============================================================================== --- /dev/null 00:00:00 1970 (empty, because file is newly added) +++ head/sys/mips/conf/std.AR_MIPS_BASE Fri Jun 16 00:44:23 2017 (r319994) @@ -0,0 +1,96 @@ +# These are the base base bits shared between all of the various Atheros +# MIPS bases. +# +# This allows a shared set of configuration and drivers to be built for +# all of the Atheros MIPS platforms without a lot of configuration file +# duplication. +# +# $FreeBSD$ + +# debugging +options EARLY_PRINTF +options ALT_BREAK_TO_DEBUGGER + +# For small memory footprints +options VM_KMEM_SIZE_SCALE=1 +options UMTX_CHAINS=16 +options NBUF=128 +# Don't include the SCSI/CAM strings in the default build +options SCSI_NO_SENSE_STRINGS +options SCSI_NO_OP_STRINGS +# .. And no sysctl strings +options NO_SYSCTL_DESCR + +makeoptions MODULES_OVERRIDE+="gpio ar71xx if_gif if_vlan if_gre if_tap" +makeoptions MODULES_OVERRIDE+="if_tun if_bridge bridgestp usb" + +# Random - required during early boot! +device random + +# net80211 +options IEEE80211_DEBUG +options IEEE80211_SUPPORT_MESH +options IEEE80211_SUPPORT_TDMA +options IEEE80211_SUPPORT_SUPERG +options IEEE80211_ALQ # 802.11 ALQ logging support + +makeoptions MODULES_OVERRIDE+="wlan wlan_xauth wlan_acl wlan_wep" +makeoptions MODULES_OVERRIDE+="wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr" + +# firewalling +options IPFIREWALL_DEFAULT_TO_ACCEPT + +makeoptions MODULES_OVERRIDE+="ipfw ipfw_nat libalias ipfw_nptv6" + +# USB wifi device drivers +makeoptions MODULES_OVERRIDE+="rtwn rtwn_usb rtwnfw" +makeoptions MODULES_OVERRIDE+="otus otusfw" + +# Atheros wifi device drivers +options ATH_DEBUG +options ATH_DIAGAPI +options ATH_ENABLE_11N +options ATH_ENABLE_DFS + +options AH_DEBUG_ALQ +options AH_DEBUG +options AH_DEBUG_ALQ +options AH_SUPPORT_AR5416 +options AH_AR5416_INTERRUPT_MITIGATION +options AH_RXCFG_SDMAMW_4BYTES + +makeoptions MODULES_OVERRIDE+="ath_main ath_pci ath_ahb ath_rate ath_dfs" +makeoptions MODULES_OVERRIDE+="ath_hal_ar5210 ath_hal_ar5211" +makeoptions MODULES_OVERRIDE+="ath_hal_ar5212 ath_hal_ar5416" +makeoptions MODULES_OVERRIDE+="ath_hal_ar9300 ath_hal" + +# USB configuration +options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order +options USB_DEBUG +options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this + +# Ethernet configuration +device mii +device arge +options ARGE_DEBUG + +# SPI, flash +device spibus +device ar71xx_spi +device mx25l +device ar71xx_wdog + +# Serial driver +device uart + +# Networking +device loop +device ether +device md +device bpf +#device if_bridge + +# GPIO - normally it's okay as a module +#device gpio +#device gpioled + Modified: head/sys/mips/conf/std.QCA955X ============================================================================== --- head/sys/mips/conf/std.QCA955X Fri Jun 16 00:00:01 2017 (r319993) +++ head/sys/mips/conf/std.QCA955X Fri Jun 16 00:44:23 2017 (r319994) @@ -17,17 +17,9 @@ cpu CPU_MIPS74K makeoptions KERNLOADADDR=0x80050000 options HZ=1000 -#options BREAK_TO_DEBUGGER -options ALT_BREAK_TO_DEBUGGER - -# options BOOTVERBOSE=10 - files "../atheros/files.ar71xx" hints "QCA955X_BASE.hints" -makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols -makeoptions MODULES_OVERRIDE="gpio ar71xx if_gif if_vlan if_gre if_tap if_tun if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_rssadapt wlan_amrr hwpmc ipfw ipfw_nat libalias ipfw_nptv6 rtwn rtwn_usb rtwnfw otus otusfw" - options DDB options KDB options ALQ @@ -40,23 +32,8 @@ options TCP_HHOOK # hhook(9) framework for TCP options PSEUDOFS #Pseudo-filesystem framework options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions -# Don't include the SCSI/CAM strings in the default build -options SCSI_NO_SENSE_STRINGS -options SCSI_NO_OP_STRINGS - -# .. And no sysctl strings -options NO_SYSCTL_DESCR - -# Limit IO size -options NBUF=128 - -# Limit UMTX hash size -# options UMTX_NUM_CHAINS=64 - # PMC - fow now there's no hwpmc module for mips74k -#options HWPMC_HOOKS -#device hwpmc -#device hwpmc_mips74k +options HWPMC_HOOKS # options NFS_LEGACYRPC # Debugging for use in -current @@ -70,55 +47,10 @@ options FFS #Berkeley Fast Filesy #options UFS_DIRHASH #Improve performance on big directories options NO_FFS_SNAPSHOT # We don't require snapshot support -# Wireless NIC cards -options IEEE80211_DEBUG -options IEEE80211_SUPPORT_MESH -options IEEE80211_SUPPORT_TDMA -options IEEE80211_SUPPORT_SUPERG -options IEEE80211_ALQ # 802.11 ALQ logging support -device wlan # 802.11 support -device wlan_wep # 802.11 WEP support -device wlan_ccmp # 802.11 CCMP support -device wlan_tkip # 802.11 TKIP support -device wlan_xauth # 802.11 hostap support +include "std.AR_MIPS_BASE" +makeoptions MODULES_OVERRIDE+="hwpmc_mips74k" -# ath(4) -device ath # Atheros network device -device ath_rate_sample -device ath_ahb # Atheros host bus glue -options ATH_DEBUG -options ATH_DIAGAPI -option ATH_ENABLE_11N -option AH_DEBUG_ALQ - -#device ath_hal -device ath_ar9300 # AR9330 HAL; no need for the others -option AH_DEBUG -option AH_SUPPORT_AR5416 # 11n HAL support option AH_SUPPORT_QCA9550 # Chipset support -option AH_DEBUG_ALQ -option AH_AR5416_INTERRUPT_MITIGATION - -device mii -device arge -options ARGE_DEBUG - -device usb -options USB_EHCI_BIG_ENDIAN_DESC # handle big-endian byte order -options USB_DEBUG -options USB_HOST_ALIGN=32 # AR71XX (MIPS in general?) requires this -device ehci - -device scbus -device umass -device da - -device spibus -device ar71xx_spi -device mx25l -device ar71xx_wdog - -device uart device uart_ar71xx device ar71xx_apb @@ -126,16 +58,10 @@ device ar71xx_apb # we'll have to stick to shared interrupts for IP2/IP3 demux. # device qca955x_apb -device loop -device ether -device md -device bpf -device random -device if_bridge -device gpio -device gpioled +device usb +device ehci -#options KTR -#options KTR_MASK=(KTR_INTR) -#options KTR_COMPILE=(KTR_INTR) -#options KTR_VERBOSE +device scbus +device umass +device da +
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201706160044.v5G0iNbg063006>