Date: Thu, 6 Nov 1997 04:11:26 -0500 (EST) From: Gang-Ryung <uh@jonah.cs.fsu.edu> To: questions@freebsd.org Subject: Hot Swap for 3Com EtherLink 3C589D Message-ID: <199711060911.EAA00248@jonah.cs.fsu.edu>
next in thread | raw e-mail | index | archive | help
Hello,
I am currently running FreeBSD 2.2.2 with PAO packages.
The insertion of 3C589D card can be captured by pccardd.
However, the removal of the card locked up the system...
I included the configuration files /etc/pccard.conf
and /etc/rc.conf
Thanks in advance.
Regards,
Gang-Ryung Uh
/etc/pccard.conf:
-----------------
# 3Com Etherlink III 3C589, 3C589B, 3C589C, 3C589D
card "3Com Corporation" "3C589"
config 0x1 "ep0" 11
insert echo 3Com Etherlink III inserted
insert /etc/pccard_ether ep0 -link0 link1
remove echo 3Com Etherlink III removed
remove /sbin/ifconfig ep0 delete
/etc/rc.conf:
-------------
#!/bin/sh
#
# This is rc.conf - a file full of useful variables that you can set
# to change the default startup behavior of your system.
#
# All arguments must be in double or single quotes.
#
# $Id: rc.conf,v 1.1.2.9 1997/05/13 08:27:49 jkh Exp $
##############################################################
### Important initial Boot-time options #####################
##############################################################
swapfile="NO" # Set to name of swapfile if aux swapfile desired.
apm_enable="YES" # Set to YES if you want APM enabled.
pccard_enable="YES" # Set to YES if you want to configure PCCARD devices.
pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
#pccardd=/stand/pccardd
#pccardc=/stand/pccardd
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
##############################################################
### Network configuration sub-section ######################
##############################################################
### Basic network options: ###
hostname="jonah.cs.fsu.edu" # Set this!
nisdomainname="cs.fsu.edu" # Set to NIS domain if using NIS (or NO).
firewall="NO" # Set to firewall type or NO for none.
tcp_extensions="YES" # Allow RFC1323 & RFC1544 extensions (or NO).
network_interfaces="lo0" # List of network interfaces (lo0 is loopback).
ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration."
### Network daemon (miscellaneous) & NFS options: ###
syslogd_enable="YES" # Run syslog daemon (or NO).
syslogd_flags="" # Flags to syslogd (if enabled).
inetd_flags="" # Optional flags to inetd (always enabled).
named_enable="NO" # Run named, the DNS server (or NO).
named_flags="" # Flags to named (if enabled).
kerberos_server_enable="NO" # Run a kerberos master server (or NO).
rwhod_enable="NO" # Run the rwho daemon (or NO).
amd_enable="NO" # Run amd service with $amd_flags (or NO).
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
nfs_client_enable="NO" # This host is an NFS client (or NO).
nfs_server_enable="NO" # This host is an NFS server (or NO).
weak_mountd_authentication="NO" # Running PCNFSD / other non-root nfsd (or NO).
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server.
rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO).
portmap_enable="YES" # Run the portmapper service (or NO).
portmap_flags="" # Flags to portmap (if enabled).
xtend_enable="NO" # Run the X-10 power controller daemon.
xtend_flags="" # Flags to xtend (if enabled).
### Network Time Services options: ###
timed_enabled="NO" # Run the time daemon (or NO).
timed_flags="" # Flags to timed (if enabled).
ntpdate_enable="NO" # Run the ntpdate to sync time (or NO).
ntpdate_flags="" # Flags to ntpdate (if enabled).
xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO).
xntpd_flags="" # Flags to xntpd (if enabled).
tickadj_enable="NO" # Run tickadj (or NO).
tickadj_flags="-Aq" # Flags to tickadj (if enabled).
# Network Information Services (NIS) options: ###
nis_client_enable="NO" # We're an NIS client (or NO)
nis_client_flags="" # Flags to ypbind (if enabled).
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
nis_ypset_flags="" # Flags to ypset (if enabled).
nis_server_enable="NO" # We're an NIS server (or NO)
nis_server_flags="" # Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
### Network routing options: ###
defaultrouter="128.186.121.1" # Set to default gateway (or NO).
static_routes="" # Set to static route list (or leave empty).
gateway_enable="NO" # Set to YES if this host will be a gateway.
router_enable="NO" # Set to YES to enable a routing daemon.
router="routed" # Name of routing daemon to use if enabled.
router_flags="-q" # Flags for routing daemon.
mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf)
ipxgateway_enable="NO" # Set to YES to enable IPX routing.
ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
ipxrouted_flags="" # Flags for IPX routing daemon.
arpproxy_all="" # obsolete kernel option ARP_PROXY_ALL equiv.
##############################################################
### System console options #################################
##############################################################
keymap="us.isox" # keymap in /usr/share/syscons/keymaps/* (or NO).
keyrate="fast" # keyboard rate to: slow, normal, fast (or NO).
keybell="NO" # bell to duration.pitch or normal or visual (or NO).
keychange="NO" # function keys default values (or NO).
cursor="NO" # cursor type {normal|blink|destructive} (or NO).
scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
blanktime="300" # blank time (in seconds) or "NO" to turn it off.
saver="star" # screen saver desired: blank/green/snake/star/NO.
mousedtype="NO" # See man page for rc.conf(8) for available settings.
mousedport="/dev/cuaa0" # Set to your mouse port (required if mousetype set)
mousedflags="" # Any additional flags to moused.
##############################################################
### PC-card options ########################################
##############################################################
#pccard_ether="ed0 ep0 fe0 sn0" # Pccard ethernet interfaces (or NO).
pccard_ether="ep0" # Pccard ethernet interfaces (or NO).
ifconfig_common="inet 128.186.121.99 netmask 255.255.255.0"
#ifconfig_ed0="$ifconfig_common"
ifconfig_ep0="$ifconfig_common"
#ifconfig_fe0="$ifconfig_common"
#ifconfig_sn0="$ifconfig_common"
##############################################################
### Miscellaneous administrative options ###################
##############################################################
lpd_enable="YES" # Run the line printer daemon
sendmail_enable="YES" # Run the sendmail daemon (or NO).
sendmail_flags="-bd" # -bd is pretty mandatory
savecore_enable="NO" # Save kernel crashdumps for debugging (or NO).
dumpdev="NO" # Device name to crashdump to (if enabled).
check_quotas="NO" # Check quotas (or NO).
accounting="NO" # Turn on process accounting (or NO).
ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
linux_enable="YES" # Linux emulation loaded at startup (or NO).
rand_irqs="NO" # Stir the entropy pool (or NO).
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199711060911.EAA00248>