Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 25 Dec 2013 12:02:03 +0000
From:      James Griffin <jmzgriffin@gmail.com>
To:        FreeBSD Stable <freebsd-stable@freebsd.org>
Subject:   Re: CAM status: CCB request completed with an error
Message-ID:  <20131225120201.GB1446@kontrol.kode5.net>
In-Reply-To: <20131223183646.GA22168@eskimo.com>
References:  <20131223183646.GA22168@eskimo.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Joseph Olatt <joji@eskimo.com>:

> Hi,
> 
> Just upgraded from 9.2-PRERELEASE to the following:
> 
>   FreeBSD cognac 9.2-STABLE FreeBSD 9.2-STABLE #0 r259742: Sun Dec 22
> 20:01:13 CST 2013     root@cognac:/usr/obj/usr/src/sys/GENERIC  i386
> 
> and started seeing the following error when I insert a USB flash drive.
> This flash drive was working fine with 9.2-PRERELEASE.
> 
>   ugen6.2: <Lexar> at usbus6
>   umass0: <Lexar JD Secure II +, class 0/0, rev 2.00/11.00, addr 2> on
>   usbus6
>   umass0:  SCSI over Bulk-Only; quirks = 0x4101
>   umass0:2:0:-1: Attached to scbus2
>   (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
>   (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an
>   error
>   (probe0:umass-sim0:0:0:0): Retrying command
>   (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
>   (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an
>   error
>   (probe0:umass-sim0:0:0:0): Retrying command
>   (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
>   (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an
>   error
>   (probe0:umass-sim0:0:0:0): Retrying command
>   (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
>   (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an
>   error
>   (probe0:umass-sim0:0:0:0): Retrying command
>   (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 00 00 00 24 00 
>   (probe0:umass-sim0:0:0:0): CAM status: CCB request completed with an
>   error
>   (probe0:umass-sim0:0:0:0): Error 5, Retries exhausted
> 
> 
> Anybody else seeing issues with the USB/CAM subsystem with the new the 
> new 9.2-STABLE code?
> 
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"

Joseph, did you find out any more information about this? Last night I ripped a few DVD's and I too saw these messages on the console. I was able to rip the data but still, I'd like to know/do more about this output.

Cheers, Jamie

-- 
James Griffin
jmzgriffin@gmail.com



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20131225120201.GB1446>