From owner-freebsd-hackers Sun Jul 19 11:18:36 1998 Return-Path: Received: (from majordom@localhost) by hub.freebsd.org (8.8.8/8.8.8) id LAA05432 for freebsd-hackers-outgoing; Sun, 19 Jul 1998 11:18:36 -0700 (PDT) (envelope-from owner-freebsd-hackers@FreeBSD.ORG) Received: from alpo.whistle.com (alpo.whistle.com [207.76.204.38]) by hub.freebsd.org (8.8.8/8.8.8) with ESMTP id LAA05427 for ; Sun, 19 Jul 1998 11:18:35 -0700 (PDT) (envelope-from julian@whistle.com) Received: (from daemon@localhost) by alpo.whistle.com (8.8.5/8.8.5) id LAA05824; Sun, 19 Jul 1998 11:09:31 -0700 (PDT) Received: from current1.whistle.com(207.76.205.22) via SMTP by alpo.whistle.com, id smtpd005819; Sun Jul 19 18:09:24 1998 Date: Sun, 19 Jul 1998 11:09:20 -0700 (PDT) From: Julian Elischer To: David Greenman cc: hackers@FreeBSD.ORG Subject: Re: Dump device with DEVFS? In-Reply-To: <199807191451.HAA13256@implode.root.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from QUOTED-PRINTABLE to 8bit by hub.freebsd.org id LAA05428 Sender: owner-freebsd-hackers@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG no, DEVFS preserves minor number bit ordering, but under SLICE, with completely dynamic partitionning it is impossible to preallocate any meaning to bits of the minor number. SLICE isa a completely separate pseudo device driver with it's own devsw entry, that sits above the raw disk drivers. All disk like devices come in through this interface instead of being accessed directly. it handles all partitionning and layering issues. Because it is impossible ahead of time to know how a disk may be partitionned, the static allocation of bits in the minor number is imppossible. For example what do you do if you decide to put a disklabel on a disklabel partition to further divide up your 'd' partition into 8 more devices? how do you assign the bits? SLICE handles this issue by simply handing out minor numbers sequentially as needed , and mapping them internally to a pointer to the device's softc structure. To see if a device is a swap partition, the correct way would be to somehow ASK it if it can be dumped to.. julian On Sun, 19 Jul 1998, David Greenman wrote: > >the test should be commented out for SLICE > > I'm a bit confused - you didn't preserve the minor number bit ordering in > devfs? > > -DG > > David Greenman > Co-founder/Principal Architect, The FreeBSD Project > > >bde broke it because he thought it needed to test for a swap partition.. > > > > > >it actually needs to be re-examined.. > > > >check the history of that file for bruce's backout. > >your anaylsys is correct. > > > > > >On 18 Jul 1998, Dag-Erling Coidan [iso-8859-1] Smørgrav wrote: > > > >> It seems to be impossible to enable a dump device with DEVFS. The > >> following code in setdumpdev() in sys/i386/i386/autoconf.c is the > >> culprit: > >> > >> if (dkpart(dev) != SWAP_PART) > >> return (ENODEV); > >> > >> dkpart(dev) is #defined to (minor(dev) & 7) in disklabel.h, and > >> SWAP_PART is #defined to 1 in the same file. > >> > >> Now MAKEDEV will assign minor numbers with the lower nybble 0x1 to > >> swap partitions ([fosw]d?b or something like that) so it will work > >> fine, but Helen's swap partition (/dev/wd0s1b) has minor number 11 > >> (lower nybble 0x3), and Niobe's swap partition (/dev/sd0b) has minor > >> number 20 (lower nybble 0x4), neither of which is acceptable to > >> setdumpdev(). The only partition I have which is eligible as a dump > >> device (due to its minor number being 25) is /dev/sd0h, aka. /usr/src. > >> > >> Am I missing something here? Is this a bug or a feature? How do I set > >> a dump device on a DEVFS system? And anyway, shouldn't setdumpdev() > >> just trust the user to know what he's doing even if the selected > >> partition doesn't seem to be a swap partition? > >> > >> BTW, I just had a panic trying to umount an msdosfs floppy - probably > >> thanks to soft updates, all my file systems except /var came up clean > >> although I was cvsupping at the time of the panic. > > > >great.. > > > >> > >> For completeness' sake, here is my dmesg, kernel config and a listing > >> of /dev/sd*: > >> > >> Copyright (c) 1992-1998 FreeBSD Inc. > >> Copyright (c) 1982, 1986, 1989, 1991, 1993 > >> The Regents of the University of California. All rights reserved. > >> FreeBSD 3.0-CURRENT #9: Fri Jul 17 18:26:15 CEST 1998 > >> finrod@niobe.ewox.org:/usr/src/sys/compile/niobe > >> Timecounter "i8254" frequency 1193182 Hz cost 2278 ns > >> Timecounter "TSC" frequency 166193751 Hz cost 137 ns > >> CPU: Pentium/P54C (166.19-MHz 586-class CPU) > >> Origin = "GenuineIntel" Id = 0x52c Stepping=12 > >> Features=0x1bf > >> real memory = 134217728 (131072K bytes) > >> > >> FreeBSD Kernel Configuration Utility - Version 1.1 > >> Type "help" for help or "visual" to go to the visual > >> configuration interface (requires MGA/VGA display or > >> serial terminal capable of displaying ANSI graphics). > >> config> quit > >> avail memory = 127885312 (124888K bytes) > >> DEVFS: ready for devices > >> Probing for devices on PCI bus 0: > >> chip0: rev 0x03 on pci0.0.0 > >> chip1: rev 0x01 on pci0.7.0 > >> de0: rev 0x22 int a irq 15 on pci0.9.0 > >> de0: ACCTON EN1207 21140A [10-100Mb/s] pass 2.2 > >> de0: address 00:00:e8:4a:83:63 > >> de0: enabling 100baseTX port > >> vga0: rev 0x70 int a irq 9 on pci0.10.0 > >> ahc0: rev 0x00 int a irq 12 on pci0.11.0 > >> ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs > >> scbus0 at ahc0 bus 0 > >> sd0 at scbus0 target 2 lun 0 > >> sd0: type 0 fixed SCSI 2 > >> sd0: Direct-Access 4341MB (8890760 512 byte sectors) > >> sd0: with 5899 cyls, 10 heads, and an average 150 sectors/track > >> ahc0:A:4: refuses WIDE negotiation. Using 8bit transfers > >> sd1 at scbus0 target 4 lun 0 > >> sd1: type 0 fixed SCSI 2 > >> sd1: Direct-Access 6180MB (12657717 512 byte sectors) > >> sd1: with 7068 cyls, 8 heads, and an average 223 sectors/track > >> ahc1: rev 0x00 int a irq 11 on pci0.12.0 > >> ahc1: aic7870 Single Channel, SCSI Id=7, 16 SCBs > >> scbus1 at ahc1 bus 0 > >> st0 at scbus1 target 3 lun 0 > >> st0: type 1 removable SCSI 2 > >> st0: Sequential-Access density code 0x0, drive empty > >> sd2 at scbus1 target 4 lun 0 > >> sd2: type 0 fixed SCSI 2 > >> sd2: Direct-Access 1030MB (2110812 512 byte sectors) > >> sd2: with 3658 cyls, 6 heads, and an average 96 sectors/track > >> cd0 at scbus1 target 5 lun 0 > >> cd0: type 5 removable SCSI 2 > >> cd0: CD-ROM cd present [258777 x 2048 byte records] > >> od0 at scbus1 target 6 lun 0 > >> od0: type 7 removable SCSI 2 > >> od0: Optical 217MB (446325 512 byte sectors) > >> od0: with approximate 217 cyls, 64 heads, and 32 sectors/track > >> Probing for PnP devices: > >> Probing for devices on the ISA bus: > >> sc0 at 0x60-0x6f irq 1 on motherboard > >> sc0: VGA color <12 virtual consoles, flags=0x0> > >> psm0 not found at 0x60 > >> sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa > >> sio0: type 16550A > >> sio1 at 0x2f8-0x2ff irq 3 on isa > >> sio1: type 16550A > >> lpt0 at 0x378-0x37f irq 7 on isa > >> lpt0: Interrupt-driven port > >> lp0: TCP/IP capable interface > >> pcm0 not found > >> fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa > >> fdc0: FIFO enabled, 8 bytes threshold > >> fd0: 1.44MB 3.5in > >> 1 3C5x9 board(s) on ISA found at 0x300 > >> ep0 at 0x300-0x30f irq 10 on isa > >> ep0: aui/bnc[*BNC*] address 00:60:8c:61:df:38 > >> npx0 on motherboard > >> npx0: INT 16 interface > >> Intel Pentium F00F detected, installing workaround > >> DEVFS: ready to run > >> IP packet filtering initialized, divert disabled, rule-based forwarding disabled, logging limited to 256 packets/entry > >> sd0: probing for MBR.. rejected.. Slice includes MBR sd0: probing for disklabel.. part a, start=0, size=131072 > >> part b, start=131072, size=1048576 > >> part d, start=3932160, size=4958600 > >> part e, start=1179648, size=131072 > >> part f, start=1310720, size=524288 > >> part g, start=1835008, size=1048576 > >> part h, start=2883584, size=1048576 > >> sd1: probing for MBR.. rejected.. Slice includes MBR sd1: probing for disklabel.. part e, start=0, size=524288 > >> part f, start=524288, size=1572864 > >> part g, start=2097152, size=10560565 > >> sd2: probing for MBR.. part 1, start=63, size=2104452 > >> sd2s1: attaching disklabel.. > >> part e, start=0, size=524288 > >> part f, start=524288, size=1580164 > >> fd0: probing for MBR.. WOULD SELECT /sd0a And it exists > >> WARNING: / was not properly dismounted. > >> fd0: Operation timeout > >> fd0: hard error, block 0 (No status) > >> ffs_mountfs: superblock updated > >> ffs_mountfs: superblock updated > >> ffs_mountfs: superblock updated > >> ffs_mountfs: superblock updated > >> ffs_mountfs: superblock updated > >> ffs_mountfs: superblock updated > >> ffs_mountfs: superblock updated > >> ffs_mountfs: superblock updated > >> > >> # > >> # Kernel configuration for niobe.ewox.org > >> # > >> machine "i386" > >> cpu "I586_CPU" > >> ident niobe > >> maxusers 64 > >> # > >> # Networking > >> options INET > >> options IPFIREWALL > >> options IPFIREWALL_VERBOSE > >> options "IPFIREWALL_VERBOSE_LIMIT=256" > >> options "NMBCLUSTERS=4096" > >> # > >> # File system > >> options DEVFS > >> options FFS > >> options FFS_ROOT # Boot from FFS > >> options NFS > >> options PROCFS > >> options SLICE # Use devfs for devices > >> options SOFTUPDATES > >> # > >> # XFree86 support > >> options SYSVMSG > >> options SYSVSEM > >> options SYSVSHM > >> options UCONSOLE > >> # > >> # Misc. kernel options > >> options "AUTO_EOI_1" > >> options "AUTO_EOI_2" > >> options "COMPAT_43" > >> options "MD5" > >> options BOUNCE_BUFFERS > >> options INCLUDE_CONFIG_FILE > >> options USERCONFIG > >> options USERCONFIG_BOOT > >> options USER_LDT > >> options VISUAL_USERCONFIG > >> # > >> config kernel root on sd0 > >> # > >> # Buses > >> controller isa0 > >> controller pci0 > >> controller pnp0 > >> # > >> # Numeric processor extensions > >> device npx0 at isa? port "IO_NPX" irq 13 vector npxintr > >> # > >> # Floppy controller > >> controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr > >> disk fd0 at fdc0 drive 0 > >> # > >> # SCSI controllers > >> controller ahc0 > >> controller scbus0 > >> device sd0 > >> device od0 > >> device st0 > >> device cd0 > >> pseudo-device su > >> pseudo-device ssc > >> options "SCSI_DELAY=1" > >> options SCSI_REPORT_GEOMETRY > >> # > >> # System console and mouse > >> device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr > >> options "MAXCONS=12" > >> options "SC_HISTORY_SIZE=4096" > >> options "MSGBUF_SIZE=32768" > >> device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr > >> # > >> # I/O ports > >> device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr > >> device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr > >> device lpt0 at isa? port? tty irq 7 vector lptintr > >> # > >> # Network adapters > >> device de0 > >> device ep0 at isa? port 0x300 net irq 10 vector epintr > >> # > >> # Networking pseudo-devices > >> pseudo-device loop > >> pseudo-device ether > >> pseudo-device tun 4 > >> pseudo-device bpfilter 4 > >> # > >> # Other pseudo-devices > >> pseudo-device gzip > >> pseudo-device pty 64 > >> pseudo-device vn 4 > >> # > >> # Sound hardware (Luigi Rizzo) > >> device pcm0 at isa? port? tty irq 5 drq 1 flags 0x15 vector pcmintr > >> # > >> > >> root@niobe # ll /dev/sd* > >> brw------- 1 root operator 14, 8 Jul 18 21:56 /dev/sd0 > >> brw------- 1 root operator 14, 19 Jul 18 21:56 /dev/sd0a > >> brw------- 1 root operator 14, 20 Jul 18 21:56 /dev/sd0b > >> brw------- 1 root operator 14, 21 Jul 18 21:56 /dev/sd0d > >> brw------- 1 root operator 14, 22 Jul 18 21:56 /dev/sd0e > >> brw------- 1 root operator 14, 23 Jul 18 21:56 /dev/sd0f > >> brw------- 1 root operator 14, 24 Jul 18 21:56 /dev/sd0g > >> brw------- 1 root operator 14, 25 Jul 18 21:56 /dev/sd0h > >> brw------- 1 root operator 14, 9 Jul 18 21:56 /dev/sd1 > >> brw------- 1 root operator 14, 26 Jul 18 21:56 /dev/sd1e > >> brw------- 1 root operator 14, 27 Jul 18 21:56 /dev/sd1f > >> brw------- 1 root operator 14, 28 Jul 18 21:56 /dev/sd1g > >> brw------- 1 root operator 14, 10 Jul 18 21:56 /dev/sd2 > >> brw------- 1 root operator 14, 29 Jul 18 21:56 /dev/sd2s1 > >> brw------- 1 root operator 14, 30 Jul 18 21:56 /dev/sd2s1e > >> brw------- 1 root operator 14, 31 Jul 18 21:56 /dev/sd2s1f > >> > >> DES > >> -- > >> One two, one two, one two. > >> > >> To Unsubscribe: send mail to majordomo@FreeBSD.org > >> with "unsubscribe freebsd-hackers" in the body of the message > >> > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-hackers" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hackers" in the body of the message