Date: Fri, 1 Jun 2012 21:25:10 -0400 From: Jason Hellenthal <jhellenthal@dataix.net> To: "Andrey S. Rybak" <ra@iop.kiev.ua> Cc: freebsd-stable@freebsd.org Subject: Re: problem with nmap Message-ID: <20120602012510.GB79759@DataIX.net> In-Reply-To: <4FC84865.4010304@iop.kiev.ua> References: <4FC76E29.5010006@iop.kiev.ua> <20120531145041.GB1976@DataIX.net> <4FC84865.4010304@iop.kiev.ua>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jun 01, 2012 at 07:43:17AM +0300, Andrey S. Rybak wrote: > Installing libpcap from ports does not help. Error message is same. > Running nmap with -dd yield next: > > Starting Nmap 6.00 ( http://nmap.org ) at 2012-06-01 05:42 EEST > Fetchfile found /usr/local/share/nmap/nmap-services > PORTS: Using top 1000 ports found open (TCP:1000, UDP:0, SCTP:0) > Fetchfile found /usr/local/share/nmap/nmap.xsl > The max # of sockets we are using is: 0 > --------------- Timing report --------------- > hostgroups: min 1, max 100000 > rtt-timeouts: init 1000, min 100, max 10000 > max-scan-delay: TCP 1000, UDP 1000, SCTP 1000 > parallelism: min 0, max 0 > max-retries: 10, host-timeout: 0 > min-rate: 0, max-rate: 0 > --------------------------------------------- > Read from /usr/local/share/nmap: nmap-services. > WARNING: No targets were specified, so 0 hosts scanned. > Nmap done: 0 IP addresses (0 hosts up) scanned in 0.04 seconds > Raw packets sent: 0 (0B) | Rcvd: 0 (0B) > > Have you also recompiled nmap after you installed libpcap. Sorrry this should be a neccesary step. nmap -V -dd -- - (2^(N-1))
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20120602012510.GB79759>