Date: Fri, 13 May 2011 10:36:38 +0000 (UTC) From: Adrian Chadd <adrian@FreeBSD.org> To: src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-head@freebsd.org Subject: svn commit: r221834 - in head/sys/dev/ath/ath_hal: ar5416 ar9002 Message-ID: <201105131036.p4DAac1o068717@svn.freebsd.org>
next in thread | raw e-mail | index | archive | help
Author: adrian Date: Fri May 13 10:36:38 2011 New Revision: 221834 URL: http://svn.freebsd.org/changeset/base/221834 Log: Remove duplicate code - add a function which calculates the ratesArray[] table which contains the per-rate target TX power. This code is shared between the v14 eeprom board setup (AR5416, AR9160, AR9280) and will also be used by the upcoming Kite (AR9287) support. Modified: head/sys/dev/ath/ath_hal/ar5416/ar5416.h head/sys/dev/ath/ath_hal/ar5416/ar5416_reset.c head/sys/dev/ath/ath_hal/ar9002/ar9285_reset.c Modified: head/sys/dev/ath/ath_hal/ar5416/ar5416.h ============================================================================== --- head/sys/dev/ath/ath_hal/ar5416/ar5416.h Fri May 13 09:57:12 2011 (r221833) +++ head/sys/dev/ath/ath_hal/ar5416/ar5416.h Fri May 13 10:36:38 2011 (r221834) @@ -237,6 +237,15 @@ extern HAL_BOOL ar5416GetChipPowerLimits struct ieee80211_channel *chan); extern void ar5416GetChannelCenters(struct ath_hal *, const struct ieee80211_channel *chan, CHAN_CENTERS *centers); +extern void ar5416SetRatesArrayFromTargetPower(struct ath_hal *ah, + const struct ieee80211_channel *chan, + int16_t *ratesArray, + const CAL_TARGET_POWER_LEG *targetPowerCck, + const CAL_TARGET_POWER_LEG *targetPowerCckExt, + const CAL_TARGET_POWER_LEG *targetPowerOfdm, + const CAL_TARGET_POWER_LEG *targetPowerOfdmExt, + const CAL_TARGET_POWER_HT *targetPowerHt20, + const CAL_TARGET_POWER_HT *targetPowerHt40); extern void ar5416GetTargetPowers(struct ath_hal *ah, const struct ieee80211_channel *chan, CAL_TARGET_POWER_HT *powInfo, Modified: head/sys/dev/ath/ath_hal/ar5416/ar5416_reset.c ============================================================================== --- head/sys/dev/ath/ath_hal/ar5416/ar5416_reset.c Fri May 13 09:57:12 2011 (r221833) +++ head/sys/dev/ath/ath_hal/ar5416/ar5416_reset.c Fri May 13 10:36:38 2011 (r221834) @@ -1635,6 +1635,63 @@ ar5416SetBoardValues(struct ath_hal *ah, */ /* + * Set the target power array "ratesArray" from the + * given set of target powers. + * + * This is used by the various chipset/EEPROM TX power + * setup routines. + */ +void +ar5416SetRatesArrayFromTargetPower(struct ath_hal *ah, + const struct ieee80211_channel *chan, + int16_t *ratesArray, + const CAL_TARGET_POWER_LEG *targetPowerCck, + const CAL_TARGET_POWER_LEG *targetPowerCckExt, + const CAL_TARGET_POWER_LEG *targetPowerOfdm, + const CAL_TARGET_POWER_LEG *targetPowerOfdmExt, + const CAL_TARGET_POWER_HT *targetPowerHt20, + const CAL_TARGET_POWER_HT *targetPowerHt40) +{ +#define N(a) (sizeof(a)/sizeof(a[0])) + int i; + + /* Blank the rates array, to be consistent */ + for (i = 0; i < Ar5416RateSize; i++) + ratesArray[i] = 0; + + /* Set rates Array from collected data */ + ratesArray[rate6mb] = ratesArray[rate9mb] = ratesArray[rate12mb] = + ratesArray[rate18mb] = ratesArray[rate24mb] = targetPowerOfdm->tPow2x[0]; + ratesArray[rate36mb] = targetPowerOfdm->tPow2x[1]; + ratesArray[rate48mb] = targetPowerOfdm->tPow2x[2]; + ratesArray[rate54mb] = targetPowerOfdm->tPow2x[3]; + ratesArray[rateXr] = targetPowerOfdm->tPow2x[0]; + + for (i = 0; i < N(targetPowerHt20->tPow2x); i++) { + ratesArray[rateHt20_0 + i] = targetPowerHt20->tPow2x[i]; + } + + if (IEEE80211_IS_CHAN_2GHZ(chan)) { + ratesArray[rate1l] = targetPowerCck->tPow2x[0]; + ratesArray[rate2s] = ratesArray[rate2l] = targetPowerCck->tPow2x[1]; + ratesArray[rate5_5s] = ratesArray[rate5_5l] = targetPowerCck->tPow2x[2]; + ratesArray[rate11s] = ratesArray[rate11l] = targetPowerCck->tPow2x[3]; + } + if (IEEE80211_IS_CHAN_HT40(chan)) { + for (i = 0; i < N(targetPowerHt40->tPow2x); i++) { + ratesArray[rateHt40_0 + i] = targetPowerHt40->tPow2x[i]; + } + ratesArray[rateDupOfdm] = targetPowerHt40->tPow2x[0]; + ratesArray[rateDupCck] = targetPowerHt40->tPow2x[0]; + ratesArray[rateExtOfdm] = targetPowerOfdmExt->tPow2x[0]; + if (IEEE80211_IS_CHAN_2GHZ(chan)) { + ratesArray[rateExtCck] = targetPowerCckExt->tPow2x[0]; + } + } +#undef N +} + +/* * ar5416SetPowerPerRateTable * * Sets the transmit power in the baseband for the given @@ -1855,33 +1912,13 @@ ar5416SetPowerPerRateTable(struct ath_ha } /* end ctl mode checking */ /* Set rates Array from collected data */ - ratesArray[rate6mb] = ratesArray[rate9mb] = ratesArray[rate12mb] = ratesArray[rate18mb] = ratesArray[rate24mb] = targetPowerOfdm.tPow2x[0]; - ratesArray[rate36mb] = targetPowerOfdm.tPow2x[1]; - ratesArray[rate48mb] = targetPowerOfdm.tPow2x[2]; - ratesArray[rate54mb] = targetPowerOfdm.tPow2x[3]; - ratesArray[rateXr] = targetPowerOfdm.tPow2x[0]; - - for (i = 0; i < N(targetPowerHt20.tPow2x); i++) { - ratesArray[rateHt20_0 + i] = targetPowerHt20.tPow2x[i]; - } - - if (IEEE80211_IS_CHAN_2GHZ(chan)) { - ratesArray[rate1l] = targetPowerCck.tPow2x[0]; - ratesArray[rate2s] = ratesArray[rate2l] = targetPowerCck.tPow2x[1]; - ratesArray[rate5_5s] = ratesArray[rate5_5l] = targetPowerCck.tPow2x[2]; - ratesArray[rate11s] = ratesArray[rate11l] = targetPowerCck.tPow2x[3]; - } - if (IEEE80211_IS_CHAN_HT40(chan)) { - for (i = 0; i < N(targetPowerHt40.tPow2x); i++) { - ratesArray[rateHt40_0 + i] = targetPowerHt40.tPow2x[i]; - } - ratesArray[rateDupOfdm] = targetPowerHt40.tPow2x[0]; - ratesArray[rateDupCck] = targetPowerHt40.tPow2x[0]; - ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0]; - if (IEEE80211_IS_CHAN_2GHZ(chan)) { - ratesArray[rateExtCck] = targetPowerCckExt.tPow2x[0]; - } - } + ar5416SetRatesArrayFromTargetPower(ah, chan, ratesArray, + &targetPowerCck, + &targetPowerCckExt, + &targetPowerOfdm, + &targetPowerOfdmExt, + &targetPowerHt20, + &targetPowerHt40); return AH_TRUE; #undef EXT_ADDITIVE #undef CTL_11A_EXT Modified: head/sys/dev/ath/ath_hal/ar9002/ar9285_reset.c ============================================================================== --- head/sys/dev/ath/ath_hal/ar9002/ar9285_reset.c Fri May 13 09:57:12 2011 (r221833) +++ head/sys/dev/ath/ath_hal/ar9002/ar9285_reset.c Fri May 13 10:36:38 2011 (r221834) @@ -533,32 +533,15 @@ ar9285SetPowerPerRateTable(struct ath_ha } } /* end ctl mode checking */ - /* Set rates Array from collected data */ - ratesArray[rate6mb] = ratesArray[rate9mb] = ratesArray[rate12mb] = ratesArray[rate18mb] = ratesArray[rate24mb] = targetPowerOfdm.tPow2x[0]; - ratesArray[rate36mb] = targetPowerOfdm.tPow2x[1]; - ratesArray[rate48mb] = targetPowerOfdm.tPow2x[2]; - ratesArray[rate54mb] = targetPowerOfdm.tPow2x[3]; - ratesArray[rateXr] = targetPowerOfdm.tPow2x[0]; - - for (i = 0; i < N(targetPowerHt20.tPow2x); i++) { - ratesArray[rateHt20_0 + i] = targetPowerHt20.tPow2x[i]; - } - - ratesArray[rate1l] = targetPowerCck.tPow2x[0]; - ratesArray[rate2s] = ratesArray[rate2l] = targetPowerCck.tPow2x[1]; - ratesArray[rate5_5s] = ratesArray[rate5_5l] = targetPowerCck.tPow2x[2]; - ratesArray[rate11s] = ratesArray[rate11l] = targetPowerCck.tPow2x[3]; - if (IEEE80211_IS_CHAN_HT40(chan)) { - for (i = 0; i < N(targetPowerHt40.tPow2x); i++) { - ratesArray[rateHt40_0 + i] = targetPowerHt40.tPow2x[i]; - } - ratesArray[rateDupOfdm] = targetPowerHt40.tPow2x[0]; - ratesArray[rateDupCck] = targetPowerHt40.tPow2x[0]; - ratesArray[rateExtOfdm] = targetPowerOfdmExt.tPow2x[0]; - if (IEEE80211_IS_CHAN_2GHZ(chan)) { - ratesArray[rateExtCck] = targetPowerCckExt.tPow2x[0]; - } - } + /* Set rates Array from collected data */ + ar5416SetRatesArrayFromTargetPower(ah, chan, ratesArray, + &targetPowerCck, + &targetPowerCckExt, + &targetPowerOfdm, + &targetPowerOfdmExt, + &targetPowerHt20, + &targetPowerHt40); + return AH_TRUE; #undef EXT_ADDITIVE #undef CTL_11G_EXT
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201105131036.p4DAac1o068717>