Date: Tue, 07 Sep 1999 14:19:44 -0700 From: "Scott Worthington" <SWorthington@hsag.com> To: <questions@freebsd.org> Subject: vinum question on 3.2-RELEASE Message-ID: <s7d51f19.010@internal.hsag.com>
next in thread | raw e-mail | index | archive | help
I'm attempting to successfully create a mirrored volume on two SCSI drives. The mirrored plexes are on /dev/da0s3c and=20 /dev/da1s1c. Both are of type 'vinum'. I can successfully 1) create, 2) start the mirror plex,=20 3) create the newfs, 4) mount the file system,=20 5) copy files into the fs. But when I reboot, vinum reports that ** no drives found... If I run vinum and do the create command and read my configuration file, I can then remount the volume manually. This is FreeBSD 3.2-RELEASE from CD-ROM. Here's the steps that I have performed to create a mirrored volume: 1) Using disklabel, created a vinum partition on /dev/da0s3c and /dev/da1s1c BTW: These partitions are ~3400M 2) Created the file: vinum.conf in the /root directory which contains: drive drive1 device /dev/da0s3c drive drive2 device /dev/da1s1c volume mirror plex org concat sd length 3300m drive drive1 plex org concat sd length 3300m drive drive2 3) Loaded 'vinum' 4) Typed 'create -f vinum.conf' 5) To start the mirrored plex 1: 'start mirror.p1' The plex remains in initializing until you start it. 6) Exited out of vinum: 'quit' 7) Created the newfs: 'newfs -v /dev/vinum/rmirror' Note: the newfs is created on the raw device 8) Mounted the newfs: 'mount /dev/vinum/mirror /mnt' 9) Copied some 'stuff' for testing: 'cp /sbin/* .' 10) Ensured that vinum was loaded at boot time by editing /boot/loader.conf and adding the line: vinum_load=3D"YES" 11) Edited the /etc/rc.conf to ensure that vinum new which drives were for it: vinum_drives=3D"/dev/da0s3c /dev/da1s1c" 12) Reboot and then vinum complains that=20 '** no drives found: No such file or directory' I've looked into the /dev/vinum/drive directory and everything looks okay. I know that I'm just not holding my tongue just right. Anyone have an insight? This how-to needs=20 a little tweek and it should work. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?s7d51f19.010>