Date: Fri, 11 Apr 1997 22:55:31 -0400 From: Karl Philip Waddell <kwaddell@gate.net> To: questions@FreeBSD.ORG Subject: Can't compile new kernel FreeBSD 2.1.5 Message-ID: <334EF9A3.27DE@gate.net>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------193F39273C15
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
To whom it may concern:
Attached please find a copy of my kernel configuration file and the make
file output. I have reviewed the config file and it looks ok. I do not
know why I am getting the error during "make". Please advise.
The system is a 386/20 with 12MB of ram, 1 fd0 (1.44), SB16 and
associated CDROM, 3Com 3c509 Nic card, and a Colorado Tape Drive 320
attached to the floppy controller.
Thank You.
Karl Waddell
kwaddell@gate.net
--------------193F39273C15
Content-Type: text/plain; charset=us-ascii; name="Kronos1"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="Kronos1"
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# $Id: GENERIC,v 1.46.2.18 1996/07/16 08:53:04 davidg Exp $
#
machine "i386"
cpu "I386_CPU"
ident "KRONOS1"
maxusers 5
options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options NFS #Network Filesystem
options "CD9660" #ISO 9660 Filesystem
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3
#options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device
options "MAXMEM=(12 * 1024)"
options BOUNCE_BUFFERS #include support for DMA bounce buffers
options UCONSOLE #Allow users to grab the console
options XSERVER #I plan to use X
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPACCT
#options ARP_PROXYALL
options SYSVSHM
options SYSVSEM
options SYSVMSG
config kernel root on wd0
controller isa0
controller fdc0 at isa? port "IO_FD1" bio flags 1 irq 6 drq 2 vector fdintr
disk fd0 at fdc0 drive 0
#disk fd1 at fdc0 drive 1
tape ft0 at fdc0 drive 1
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1
options ATAPI #Enable ATAPI support for IDE bus
device wcd0 #IDE CD-ROM
# Configure CDROM
controller matcd0 at isa? port 0x230 bio
# Configure SoundBlaster Card
controller snd0
device sbxvi0 at isa? drq 5
device sbmidi0 at isa? port 0x300
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
# Mandatory, don't remove
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
device lpt0 at isa? port? tty irq 7 vector lptintr
# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
#device de0
#device fxp0
#device vx0
#device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
#device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
#device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
device ep0 at isa? port 0x300 net irq 10 vector epintr
#device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
#device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
#device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
#device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
#device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
pseudo-device loop
pseudo-device ether
pseudo-device log
pseudo-device sl 1
# ijppp uses tun instead of ppp device
#pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 32
pseudo-device gzip # Exec gzipped a.out's
pseudo-device bpfilter
pseudo-device speaker
pseudo-device snp 5
--------------193F39273C15
Content-Type: text/plain; charset=us-ascii; name="make.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline; filename="make.log"
cc -c -O -W -Wreturn-type -Wcomment -Wredundant-decls -Wimplicit -nostdinc -I. -I../.. -I../../sys -I/usr/include -DKRONOS1 -DI386_CPU -DATAPI -DSYSVMSG -DSYSVSEM -DSYSVSHM -DIPACCT -DIPFIREWALL_VERBOSE -DIPFIREWALL -DXSERVER -DUCONSOLE -DBOUNCE_BUFFERS -DMAXMEM=(12 * 1024) -DCOMPAT_43 -DPROCFS -DCD9660 -DNFS -DFFS -DINET -DKERNEL -Di386 -DLOAD_ADDRESS=0xF0100000 -DTIMEZONE=0 -DDST=0 -DMAXUSERS=5 -UKERNEL ../../i386/i386/genassym.c
Syntax error: "(" unexpected
*** Error code 2
Stop.
--------------193F39273C15--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?334EF9A3.27DE>