From owner-freebsd-mobile  Thu Oct  2 09:12:48 1997
Return-Path: <owner-freebsd-mobile>
Received: (from root@localhost)
          by hub.freebsd.org (8.8.7/8.8.7) id JAA05301
          for mobile-outgoing; Thu, 2 Oct 1997 09:12:48 -0700 (PDT)
Received: from horton.iaces.com (proot@horton.iaces.com [204.147.87.98])
          by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id JAA05284
          for <mobile@freebsd.org>; Thu, 2 Oct 1997 09:12:40 -0700 (PDT)
Received: (from proot@localhost)
	by horton.iaces.com (8.8.5/8.8.5) id LAA10085;
	Thu, 2 Oct 1997 11:12:25 -0500 (CDT)
From: "Paul T. Root" <proot@horton.iaces.com>
Message-Id: <199710021612.LAA10085@horton.iaces.com>
Subject: Re: problems with PCMCIA cards
To: mike@smith.net.au (Mike Smith)
Date: Thu, 2 Oct 1997 11:12:25 -0500 (CDT)
Cc: mike@smith.net.au, mobile@freebsd.org
In-Reply-To: <199710021554.BAA00787@word.smith.net.au> from Mike Smith at "Oct 3, 97 01:24:30 am"
X-Organization: !nterprise Networking Services - ACES
X-Phone: (612) 664-3385
X-Fax: (612) 664-4779
X-Page: (800) SKY-PAGE PIN: 537-7270
X-Address: 600 Stinson Blvd, Fl 1S
X-Address: Minneapolis, MN 55413
X-Mailer: ELM [version 2.4ME+ PL22 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: owner-freebsd-mobile@freebsd.org
X-Loop: FreeBSD.org
Precedence: bulk

In a previous message, Mike Smith said:
> Alright, we're getting somewhere.  The stray irq 11 implies that 11 may 
> be a bad choice for your system.  Check your hardware documentation and 
> make sure that 11 isn't used by the onboard sound system, or the PCI 
> bus (eg. in my Toshiba IRQ 11 is assigned for internal PCI peripherals).

Hmm. Ok. I wasn't allowed any documentation for the machine. I'm not sure
why. Corporate people are trying to support it on NT. I'll see what I
can dig up.

> > Tuple #7, code = 0x1b (Configuration entry), length = 7
> >     000:  21 08 aa 60 f8 02 07
> > 	Config index = 0x21
> > 	Card decodes 10 address lines, 8 Bit I/O only
> > 		I/O address # 1: block start = 0x2f8 block length = 0x8
> 
> This is probably the best CI to use; it sits on the sio1 address.
> 
> As I quoted before, the entry :
> 
> card "Megahertz" "XJ4336-CC4336"
>         config  0x21 "sio1" 5
> 
> works for me.  You might want to try this (make very sure that the 
> interupt you nominate in the card spec is listed as available at the 
> top of the file...

IRQ 5 is used by the SB-Pro compatiable thing. I've got OSS running it
nicely. Maybe IRQ 7

-- 
"If they took away our sticks and gave us brooms, we'd still
 have fights." --Phil Esposito of the NHL's New York Rangers