Date: Tue, 20 Jan 2004 22:00:33 -0500 From: "alexis georges" <floating_in_space_@hotmail.com> To: kris@obsecurity.org Cc: freebsd-current@freebsd.org Subject: Re: Timecounters and 5.2 Message-ID: <BAY13-F31qHCnIbxgg80000e277@hotmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] well, i could not read the stuff when doing boot -v, but i did it with no acpi, and i attached the dmesg..also, when i do do the boot with acpi and -v, the last line i get is : lo0: bpf attached there is no error i can see..just that the boot freezes (with the Timecounters stuff as the last 2 lines).. i hope this helps a bit.if there was a way to scroll back up during boot so i could see if there were any errors, it would be nice.i tried every key already.. thanks >From: Kris Kennaway <kris@obsecurity.org> >To: alexis georges <floating_in_space_@hotmail.com> >CC: freebsd-current@freebsd.org >Subject: Re: Timecounters and 5.2 >Date: Tue, 20 Jan 2004 18:28:29 -0800 > >On Tue, Jan 20, 2004 at 07:36:00PM -0500, alexis georges wrote: > > Hey guys, > > I am trying to upgrade from 5.1 to 5.2. > > First here are the things to know; i have these > > > > AMD AthlonXP 2400+ > > nForce2-400 Motherboard -> Asus A7N8X-Deluxe (pcb 2) > > > > now when i am booting from cd, i get this: > > > > [MSG] > > Timecounters "TSC" 1996989537 Hz quality 800 > > Timecounters tick every 10.000 msec > > [/MSG[ > > > > now the problem is that the loading just stops and freezes at these 2 > > lines.. > >What does 'boot -v' show? The problem may not be in the timecounter >code, this could just be the last thing that was displayed prior to >the hang in other code. > > > i Have never had this kind of message with 5.1, so I was wondering > > if anyone had experianced this, or if anyone has an idea. > > (I also tried booting w/out ACPI but later on i get some errors about a > > PNP* device not being able to load..) > >What is the exact error? > >Kris ><< attach3 >> _________________________________________________________________ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail http://join.msn.com/?page=dept/bcomm&pgmarket=en-ca&RU=http%3a%2f%2fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca [-- Attachment #2 --] Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004 root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e1000. mptable_probe: MP Config Table has bad signature: \^G\M^?\M^?\^D Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) XP 2400+ (1996.99-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x681 Stepping = 1 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> real memory = 1073676288 (1023 MB) avail memory = 1033519104 (985 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00fdeb0 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 agp0: <NVIDIA nForce2 AGP Controller> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 1.1 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xea087000-0xea087fff irq 11 at device 2.0 on pci0 usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xea082000-0xea082fff irq 11 at device 2.1 on pci0 usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci0: <serial bus, USB> at device 2.2 (no driver attached) pci0: <network, ethernet> at device 4.0 (no driver attached) pci0: <multimedia, audio> at device 5.0 (no driver attached) pci0: <multimedia, audio> at device 6.0 (no driver attached) pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0 pci1: <PCI bus> on pcib1 pci_cfgintr: 1:9 INTA BIOS irq 11 dc0: <ADMtek AN985 10/100BaseTX> port 0xa000-0xa0ff mem 0xe9000000-0xe90003ff irq 11 at device 9.0 on pci1 dc0: Ethernet address: 00:20:78:0f:1f:4f miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci0: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at device 9.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pcib2: <PCIBIOS PCI-PCI bridge> at device 12.0 on pci0 pci2: <PCI bus> on pcib2 pci_cfgintr: 2:1 INTA BIOS irq 11 xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xb000-0xb07f mem 0xe5000000-0xe500007f irq 11 at device 1.0 on pci2 xl0: Ethernet address: 00:26:54:0e:01:dc miibus1: <MII bus> on xl0 acphy0: <AC101L 10/100 media interface> on miibus1 acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fwohci0: vendor=10de, dev=6e fwohci0: <1394 Open Host Controller Interface> mem 0xea085000-0xea08503f,0xea084000-0xea0847ff irq 11 at device 13.0 on pci0 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:00:1c:40:76 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:1c:40:76 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pcib3: <PCI-PCI bridge> at device 30.0 on pci0 pci3: <PCI bus> on pcib3 pci3: <display, VGA> at device 0.0 (no driver attached) pci3: <display> at device 0.1 (no driver attached) orm0: <Option ROMs> at iomem 0xd2000-0xd27ff,0xd0000-0xd17ff,0xc0000-0xccfff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0401> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) Timecounter "TSC" frequency 1996988162 Hz quality 800 Timecounters tick every 10.000 msec GEOM: create disk ad0 dp=0xc6a56760 ad0: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata0-master UDMA100 acd0: DVDROM <DVD-ROM DDU1621> at ata1-master PIO4 acd1: CDRW <SONY CD-RW CRX185E3> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s2a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY13-F31qHCnIbxgg80000e277>