Date: Fri, 17 Feb 2017 21:20:52 -0700 From: Gordon Zaft <gordonzaft@gmail.com> To: freebsd-sparc64@freebsd.org Subject: Re: Adding disk on Sun Fire V245 w/FreeBSD 11 Message-ID: <CAGuhNT3RmfjTfejpgPTVWn3AzR8zKNdoqfX14EkCNRR9O1wBQQ@mail.gmail.com> In-Reply-To: <CAGuhNT2%2BiF_Or1vpwLFgBYfynEy=M6Rh5bKXWX0zMgdxYuv1Ow@mail.gmail.com> References: <CAGuhNT2%2BiF_Or1vpwLFgBYfynEy=M6Rh5bKXWX0zMgdxYuv1Ow@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I finally figured this out and figured I should document for posterity... I realized I had not tried to do a probe-scsi from the OBP prompt, so I did that. I got an endless cascade of Base SAS World Wide ID is 0! This must be fixed immediately using set-sas-wwid So digging into this document https://docs.oracle.com/cd/E19088-01/v215.srvr/819-3040-18/Disk-vols.html I realized the onboard RAID was messing me up. Following the directions, and the ok> prompt: setenv auto-boot? false setenv fcode-debug? true reset-all Then a ok>show-disks Select the SCSI disk controller (for me it was b) ) ok>select ^Y (inserts the line from show-disks; trim off the /disk) doing ok>show-volumes showed that the disks that I wasn't seeing were listed as disabled (or inactive) volumes. To fix this I deleted each volume ok>0 delete-volume ok>1 delete-volume ok>show-volumes now shows no volumes. Doing a ok>setenv fcode-debug? false ok>reset-all when the system came back a probe-scsi showed the disks now, and when I boot they are in dmesg. I still had to put a VTOC on them since, in my case they were IBM disks, or wiped Sun disks: /sbin/gpart create -s VTOC8 da1 Then /sbin/gpart add -t freebsd-ufs da1 to create one big partition. Then a newfs as usual and you're good to go! G On Fri, Nov 18, 2016 at 9:35 PM, Gordon Zaft <gordonzaft@gmail.com> wrote: > > I have a Sun Fire V245 running 11.0. It had one 146GB hard disk in it. I > went to add a second similar disk but the OS doesn't seem to see it. I can > tell the hardware sees it as if I pull it out while the machine's on I get > an alert from the ALOM. But I don't see a "da1" device in dmesg. > > What am I doing wrong? > > Thanks in advance! > > -- > Gordon Zaft > Province 35 Governor > Phi Mu Alpha Sinfonia Fraternity > gordonzaft@gmail.com > -- Gordon Zaft Province 35 Governor Phi Mu Alpha Sinfonia Fraternity gordonzaft@gmail.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGuhNT3RmfjTfejpgPTVWn3AzR8zKNdoqfX14EkCNRR9O1wBQQ>