Date: Mon, 22 Jul 2019 07:59:14 -0400 From: Aryeh Friedman <aryeh.friedman@gmail.com> To: FreeBSD Mailing List <freebsd-questions@freebsd.org>, FreeBSD chat <freebsd-chat@freebsd.org> Subject: Best hardware for a replacement desktop? Message-ID: <CAGBxaX=ch_=NKBAme9wTQjSVsJ4Oxschs3Qg7Kddh7KouW3DJw@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
My current desktop (FreeBSD 11.2-pl10 AMD64) is starting to have a lot of hardware problems (extreme problems with even the smallest power hiccup for example [rebooted several hundred times yesterday during NYC brownouts]). What is a good replacement for between $500-$1000? (if Ryzen is stable I would like to use one). I have attached the dmesg for my current system below (I have gotten everything to work on it, xfce-4, firefox, etc. *EXCEPT* any hypervisor despite repeated attempts and working with the bhyve team). I prefer a custom built machine over a name brand. Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-RELEASE-p10 #1 r349114: Sun Jun 16 12:44:01 EDT 2019 root@lilith:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) VT(vga): resolution 640x480 CPU: AMD A6-3650 APU with Radeon(tm) HD Graphics (2595.34-MHz K8-class CPU) Origin="AuthenticAMD" Id=0x300f10 Family=0x12 Model=0x1 Stepping=0 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x802009<SSE3,MON,CX16,POPCNT> AMD Features=0xee400800<SYSCALL,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT> SVM: NP,NRIP,NAsids=64 TSC: P-state invariant, performance statistics real memory = 17179869184 (16384 MB) avail memory = 16557277184 (15790 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <HPQOEM SLIC-CPC> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) Firmware Warning (ACPI): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20171214/tbfadt-796) ioapic0 <Version 2.1> irqs 0-23 on motherboard SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 1297668931 Hz quality 800 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4820, 0) error 19 nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 390.87 Tue Aug 21 15:53:31 PDT 2018 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <HPQOEM SLIC-CPC> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: _OSC returned error 0x10 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0 pcib1: [GIANT-LOCKED] pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xfd000000-0xfdffffff,0xf0000000-0xf7ffffff,0xf8000000-0xf9ffffff irq 18 at device 0.0 on pci1 nvidia0: <GeForce GT 710> on vgapci0 vgapci0: child nvidia0 requested pci_enable_io vgapci0: child nvidia0 requested pci_enable_io vgapci0: Boot video device hdac0: <NVIDIA (0x0e0f) HDA Controller> mem 0xfe080000-0xfe083fff irq 19 at device 0.1 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0 pcib2: [GIANT-LOCKED] pci2: <ACPI PCI bus> on pcib2 ral0: <Ralink Technology RT5390> mem 0xfe100000-0xfe10ffff irq 16 at device 0.0 on pci2 ral0: MAC/BBP RT5390 (rev 0x0502), RF RT5390 (MIMO 1T1R), address 20:10:7a:58:b9:29 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0 pci3: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfa104000-0xfa104fff,0xfa100000-0xfa103fff irq 17 at device 0.0 on pci3 re0: Using 1 MSI-X message re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00200000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: e8:40:f2:97:38:d1 re0: netmap queues/slots: TX 1/256, RX 1/256 ahci0: <AMD Hudson-2 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe20c000-0xfe20c7ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ohci0: <AMD FCH USB Controller> mem 0xfe20b000-0xfe20bfff irq 18 at device 18.0 on pci0 usbus0 on ohci0 usbus0: 12Mbps Full Speed USB v1.0 ehci0: <AMD FCH USB 2.0 controller> mem 0xfe20a000-0xfe20a0ff irq 17 at device 18.2 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 ohci1: <AMD FCH USB Controller> mem 0xfe209000-0xfe209fff irq 18 at device 19.0 on pci0 usbus2 on ohci1 usbus2: 12Mbps Full Speed USB v1.0 ehci1: <AMD FCH USB 2.0 controller> mem 0xfe208000-0xfe2080ff irq 17 at device 19.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci1 usbus3: 480Mbps High Speed USB v2.0 hdac1: <AMD Hudson-2 HDA Controller> mem 0xfe200000-0xfe203fff irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci4: <ACPI PCI bus> on pcib4 ohci2: <OHCI (generic) USB controller> mem 0xfe207000-0xfe207fff irq 18 at device 20.5 on pci0 usbus4 on ohci2 usbus4: 12Mbps Full Speed USB v1.0 sdhci_pci0: <Generic SD HCI> mem 0xfe206000-0xfe2060ff irq 16 at device 20.7 on pci0 sdhci_pci0: 1 slot(s) allocated ohci3: <AMD FCH USB Controller> mem 0xfe205000-0xfe205fff irq 18 at device 22.0 on pci0 usbus5 on ohci3 usbus5: 12Mbps Full Speed USB v1.0 ehci2: <AMD FCH USB 2.0 controller> mem 0xfe204000-0xfe2040ff irq 17 at device 22.2 on pci0 usbus6: EHCI version 1.0 usbus6 on ehci2 usbus6: 480Mbps High Speed USB v2.0 acpi_button0: <Power Button> on acpi0 orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff on isa0 ppc0: cannot reserve I/O port range hwpstate0: <Cool`n'Quiet 2.0> on cpu0 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <NVIDIA (0x0051) HDA CODEC> at cad 0 on hdac0 hdaa0: <NVIDIA (0x0051) Audio Function Group> at nid 1 on hdacc0 pcm0: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 4 on hdaa0 pcm1: <NVIDIA (0x0051) (HDMI/DP 8ch)> at nid 5 on hdaa0 hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 pcm2: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1 ugen5.1: <AMD OHCI root HUB> at usbus5 ugen6.1: <AMD EHCI root HUB> at usbus6 ugen3.1: <AMD EHCI root HUB> at usbus3 ugen1.1: <AMD EHCI root HUB> at usbus1 uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen2.1: <AMD OHCI root HUB> at usbus2 ugen0.1: <AMD OHCI root HUB> at usbus0 ugen4.1: <AMD OHCI root HUB> at usbus4 uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub5: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 <SSD2SC240G1SA754D117-443 N0307A> ACS-2 ATA SATA 3.x device uhub6: ada0: Serial Number PNY14160000485190062 <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 1024bytes) ada0: Command Queueing enabled ada0: 228936MB (468862128 512 byte sectors) ada1 at ahcich3 bus 0 scbus3 target 0 lun 0 ada1: <Hitachi HDS721010CLA630 JP4OA41A> ATA8-ACS SATA 3.x device ada1: Serial Number JP2940N02RMUSV ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 953869MB (1953525168 512 byte sectors) cd0 at ahcich2 bus 0 scbus2 target 0 lun 0 cd0: <hp DVD A DH16ACSH JHD6> Removable CD-ROM SCSI device cd0: Serial Number 2L8215915118 cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed Trying to mount root from zfs:zroot/ROOT/default []... Root mount waiting for: usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 uhub5: 2 ports with 2 removable, self powered uhub0: 4 ports with 4 removable, self powered uhub4: 5 ports with 5 removable, self powered uhub6: 5 ports with 5 removable, self powered Root mount waiting for: usbus6 usbus3 usbus1 uhub1: 4 ports with 4 removable, self powered uhub2: 5 ports with 5 removable, self powered uhub3: 5 ports with 5 removable, self powered Root mount waiting for: usbus3 usbus1 ugen1.2: <vendor 0x0409 product 0x005a> at usbus1 uhub7 on uhub3 uhub7: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on usbus1 ugen3.2: <Generic USB2.0-CRW> at usbus3 umass0 on uhub2 umass0: <Bulk-In, Bulk-Out, Interface> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:6:0: Attached to scbus6 da0 at umass-sim0 bus 0 scbus6 target 0 lun 0 da0: <Generic- Compact Flash 1.00> Removable Direct Access SCSI device da0: Serial Number 20060413092100000 da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da0: quirks=0x2<NO_6_BYTE> da1 at umass-sim0 bus 0 scbus6 target 0 lun 1 da1: <Generic- SM/xD-Picture 1.00> Removable Direct Access SCSI device da1: Serial Number 20060413092100000 da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da1: quirks=0x2<NO_6_BYTE> da2 at umass-sim0 bus 0 scbus6 target 0 lun 2 da2: <Generic- SD/MMC 1.00> Removable Direct Access SCSI device da2: Serial Number 20060413092100000 da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da2: quirks=0x2<NO_6_BYTE> da3 at umass-sim0 bus 0 scbus6 target 0 lun 3 da3: <Generic- MS/MS-Pro 1.00> Removable Direct Access SCSI device da3: Serial Number 20060413092100000 da3: 40.000MB/s transfers da3: Attempt to query device size failed: NOT READY, Medium not present da3: quirks=0x2<NO_6_BYTE> uhub7: 4 ports with 4 removable, self powered Root mount waiting for: usbus1 ugen1.3: <PixArt USB Optical Mouse> at usbus1 ugen1.4: <Logitech USB Keyboard> at usbus1 ukbd0 on uhub7 ukbd0: <USB Keyboard> on usbus1 kbd2 at ukbd0 random: unblocking device. re0: link state changed to DOWN re0: link state changed to UP ums0 on uhub7 ums0: <PixArt USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 3> on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0 uhid0 on uhub7 uhid0: <USB Keyboard> on usbus1 ugen1.3: <PixArt USB Optical Mouse> at usbus1 (disconnected) ums0: at uhub7, port 2, addr 3 (disconnected) ums0: detached ugen1.3: <PixArt USB Optical Mouse> at usbus1 ums0 on uhub7 ums0: <PixArt USB Optical Mouse, class 0/0, rev 1.10/1.00, addr 3> on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0 -- Aryeh M. Friedman, Lead Developer, http://www.PetiteCloud.org
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAGBxaX=ch_=NKBAme9wTQjSVsJ4Oxschs3Qg7Kddh7KouW3DJw>