Date: Mon, 28 Oct 2002 17:00:10 +0100 (CET) From: Manfred Petz <pm@saturn.innonet.at> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/44569: Kernel crash Message-ID: <200210281600.g9SG0AfT007890@saturn.innonet.at>
next in thread | raw e-mail | index | archive | help
>Number: 44569 >Category: kern >Synopsis: Kernel crash >Confidential: no >Severity: critical >Priority: high >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Mon Oct 28 08:10:03 PST 2002 >Closed-Date: >Last-Modified: >Originator: Manfred Petz >Release: FreeBSD 4.6.1-RELEASE-p8 i386 >Organization: Innonet >Environment: System: FreeBSD saturn.innonet.at 4.6.1-RELEASE-p8 FreeBSD 4.6.1-RELEASE-p8 #2: Mon Aug 5 15:06:34 CEST 2002 root@saturn.innonet.at:/usr/src/sys/compile/SATURN i386 During some file-system activity (make world to build a jail), the system crashed. Crashdumps are available: ftp://ftp.innonet.at/pub/FreeBSD/crash/kernel.0.bz2 ftp://ftp.innonet.at/pub/FreeBSD/crash/vmcore.0.bz2 ftp://ftp.innonet.at/pub/FreeBSD/crash/kernel.1.bz2 ftp://ftp.innonet.at/pub/FreeBSD/crash/vmcore.1.bz2 Informational dmesg(8) output: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.6.1-RELEASE-p8 #2: Mon Aug 5 15:06:34 CEST 2002 root@saturn.innonet.at:/usr/src/sys/compile/SATURN Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 801824966 Hz CPU: Pentium III/Pentium III Xeon/Celeron (801.82-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 268353536 (262064K bytes) avail memory = 257728512 (251688K bytes) Preloaded elf kernel "kernel" at 0xc0321000. Pentium Pro MTRR support enabled Using $PIR table, 8 entries at 0xc00f1280 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <ATI Mach64-GZ graphics accelerator> at 0.0 irq 10 isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA100 controller> port 0xb800-0xb80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <VIA 83C572 USB controller> at 4.2 irq 11 pci0: <VIA 83C572 USB controller> at 4.3 irq 11 pci0: <unknown card> (vendor=0x1106, dev=0x3057) at 4.4 stl0: <EC8/64-PCI> port 0xa400-0xa47f,0xa800-0xa87f irq 11 at device 6.0 on pci0 stl0: EC8/64-PCI (driver version 2.0.0) unit=0 nrpanels=3 nrports=24 stl0: driver is using old-style compatibility shims xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa000-0xa07f mem 0xf6800000-0xf680007f irq 10 at device 8.0 on pci0 xl0: Ethernet address: 00:04:76:92:a9:0d miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcib3: <PCI to PCI bridge (vendor=1044 device=a500)> at device 10.0 on pci0 pci2: <PCI bus> on pcib3 asr0: <Adaptec Caching SCSI RAID> mem 0xf8000000-0xf9ffffff irq 11 at device 10.1 on pci0 asr0: major=154 asr0: ADAPTEC 2100S FW Rev. 370F, 1 channel, 256 CCBs, Protocol I2O pcib1: <Host to PCI bridge> on motherboard pci3: <PCI bus> on pcib1 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc87ff,0xcc000-0xd0fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 IPsec: Initialized Security Association Processing. IP Filter: v3.4.27 initialized. Default = pass all, Logging = enabled ata1-slave: ATA identify retries exceeded ata1-master: ATA identify retries exceeded acd0: CDROM <LTN362> at ata0-master PIO4 sa0 at asr0 bus 0 target 8 lun 0 sa0: <TANDBERG SLR6 0404> Removable Sequential Access SCSI-2 device da0 at asr0 bus 0 target 0 lun 0 da0: <ADAPTEC RAID-1 370F> Fixed Direct Access SCSI-2 device da0: Tagged Queueing Enabled da0: 8750MB (17920000 512 byte sectors: 255H 63S/T 1115C) da1 at asr0 bus 0 target 2 lun 0 da1: <ADAPTEC RAID-5 370F> Fixed Direct Access SCSI-2 device da1: Tagged Queueing Enabled da1: 34862MB (71397376 512 byte sectors: 255H 63S/T 4444C) Mounting root from ufs:/dev/da0s1a WARNING: / was not properly dismounted Limiting icmp unreach response from 201 to 200 packets per second >Description: >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200210281600.g9SG0AfT007890>