Date: Tue, 14 May 2002 11:08:39 +0200 From: John Angelmo <john@veidit.net> To: "M. Warner Losh" <imp@village.org> Cc: current@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG Subject: Re: Problem with Intel 2011b Message-ID: <3CE0D417.9000504@veidit.net> References: <3CDFC73D.4020208@veidit.net> <20020513.115718.90200180.imp@village.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
M. Warner Losh wrote:
> In message: <3CDFC73D.4020208@veidit.net>
> John Angelmo <john@veidit.net> writes:
> : Hello
> :
> : I just got my hands on a Intel 2011b Wireless card, I'm running FreeBSD
> : current (dated just before gcc 3.1).
> : Now my problem is that I insert the card and well nothing happens, the
> : system gets locked, when I remove the card I everything starts working
> : once again, and it says it can't manage card ("null"), ("null")
> :
> : Any one got any idea?
>
> Nope.
>
> However, if you boot -v, and send me the dmesg maybe I can help.
>
> Warner
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message
OK here's my dmesg
The 2011 card is allmost the same as the symbol card I use, the 2011b
card is the updated version from intel that rund on 3,3v
/John
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Tue May 7 20:24:04 CEST 2002
root@Amnesiac:/usr/obj/usr/src/sys/Linn
Preloaded elf kernel "/boot/kernel/kernel" at 0xc047b000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc047b0b4.
Preloaded splash_image_data "/boot/darth_maul.bmp" at 0xc047b164.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc047b1b8.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc047b260.
Calibrating clock(s) ... TSC clock: 847117626 Hz, i8254 clock: 1193101 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 847180437 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (847.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 266797056 (260544K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004a2000 - 0x0fe67fff, 261906432 bytes (63942 pages)
avail memory = 254554112 (248588K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6dc0
bios32: Entry = 0xfd929 (c00fd929) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd7e0+0x342
pnpbios: Found PnP BIOS data at 0xc00f6d70
pnpbios: Entry = f0000:a9c1 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00
00 01 10 00 00 01 31 01 00 01 43 01 00 01 5d 01
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 16 mode(s) found
VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc0369e80 (1000040)
VESA: Intel815M(TM) Graphics Chip Accelerated VGA BIOS
VESA: Intel Corporation i815M Graphics Controller Hardware Version 0.0
random: <entropy source>
splash: image@0xc03e535c, size:308278
bmp_start(): splash_mode:257
splash: image decoder found: splash_bmp
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001004
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=11308086)
Using $PIR table, 6 entries at 0xc00fdf60
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 3, width = 1
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
ACPI timer looks GOOD min = 3, max = 4, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x1130, revid=0x11
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
map[10]: type 3, range 32, base f8000000, size 26, enabled
map[14]: type 1, range 32, base f4000000, size 19, enabled
found-> vendor=0x8086, dev=0x1132, revid=0x11
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x2448, revid=0x03
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x244c, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 00001800, size 4, enabled
found-> vendor=0x8086, dev=0x244a, revid=0x03
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 00001820, size 5, enabled
found-> vendor=0x8086, dev=0x2442, revid=0x03
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=7
map[20]: type 4, range 32, base 00001810, size 4, enabled
found-> vendor=0x8086, dev=0x2443, revid=0x03
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
intpin=b, irq=9
map[20]: type 4, range 32, base 00001840, size 5, enabled
found-> vendor=0x8086, dev=0x2444, revid=0x03
bus=0, slot=31, func=4
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=c, irq=10
map[10]: type 4, range 32, base 0000fc00, size 8, port disabled
map[14]: type 4, range 32, base 0000ff80, size 6, enabled
found-> vendor=0x8086, dev=0x2445, revid=0x03
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=b, irq=9
pci0: <PCI bus> on acpi_pcib0
agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 5 at device 2.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x2000-0xefff
pcib1: memory decode 0xf4100000-0xf46fffff
pcib1: prefetched decode 0xff000000-0xfffff
pci1: physical bus=1
map[10]: type 1, range 32, base f4300000, size 12, enabled
found-> vendor=0x1217, dev=0x6933, revid=0x02
bus=1, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f4301000, size 12, enabled
found-> vendor=0x1217, dev=0x6933, revid=0x02
bus=1, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
intpin=b, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000ee00, size 8, port disabled
map[14]: type 1, range 32, base f4302000, size 8, memory disabled
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=1, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <PCI bus> on pcib1
pcic0: <O2micro 6933 PCI-Cardbus Bridge> mem 0xf4300000-0xf4300fff irq 5 at device 2.0 on pci1
pcib1: device pcic0 requested decoded memory range 0xf4300000-0xf4300fff
pcic0: Warning: O2micro OZ68xx chips may not work
pcic0: PCI Configuration space:
0x00: 0x69331217 0x04100007 0x06070002 0x00824000
0x10: 0xf4300000 0x020000a0 0x20020201 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000001
0x30: 0x00000001 0x00000001 0x00000001 0x04a00105
0x40: 0x10e710cf 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x0c0023bf 0x824203ea 0x10500000 0x00000000
0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard0: <PC Card bus (classic)> on pcic0
pcic1: <O2micro 6933 PCI-Cardbus Bridge> mem 0xf4301000-0xf4301fff irq 9 at device 2.1 on pci1
pcib1: device pcic1 requested decoded memory range 0xf4301000-0xf4301fff
pcic1: Warning: O2micro OZ68xx chips may not work
pcic1: PCI Configuration space:
0x00: 0x69331217 0x04100007 0x06070002 0x00824000
0x10: 0xf4301000 0x020000a0 0x20020201 0x00000000
0x20: 0x00000000 0x00000000 0x00000000 0x00000001
0x30: 0x00000001 0x00000001 0x00000001 0x04a00209
0x40: 0x10e710cf 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x00000000
0x90: 0x0c0023bf 0x824203ea 0x10500000 0x00000000
0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pccard1: <PC Card bus (classic)> on pcic1
rl0: <RealTek 8139 10/100BaseTX> port 0xee00-0xeeff mem 0xf4302000-0xf43020ff irq 5 at device 6.0 on pci1
pcib1: device rl0 requested decoded I/O range 0xee00-0xeeff
rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode
rl0: Ethernet address: 00:90:96:19:6b:b2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: rl0 attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0x1800-0x180f at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x1800
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x1808
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 7f 7f
ata1: mask=03 stat0=10 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x1820-0x183f irq 7 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ichsmb0: <Intel 82801BA (ICH2) SMBus controller> port 0x1810-0x181f irq 9 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x1840-0x185f irq 10 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcm0: <Intel 82801BA (ICH2)> port 0xff80-0xffbf,0xfc00-0xfcff irq 9 at device 31.5 on pci0
pcm0: ac97 codec id 0x83847609 (SigmaTel STAC9721/9723)
pcm0: ac97 codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement
pcm0: ac97 primary codec extended features AMAP
pcm0: sndbuf_setmap 4a5000, 4000; 0xd1dfb000 -> 4a5000
pcm0: sndbuf_setmap 4a9000, 4000; 0xd1e08000 -> 4a9000
pcm0: measured ac97 link rate at 29467 Hz
acpi_button0: <Power Button> on acpi0
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
unknown: not probed (disabled)
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: irq maps: 0x201 0x211 0x201 0x201
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
pcic: pcic0 already exists; skipping it
pcic: pcic1 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
adv0 failed to probe on isa0
aha0 failed to probe on isa0
aic0 failed to probe on isa0
bt0 failed to probe on isa0
cs0 failed to probe at port 0x300 on isa0
ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0
fe0 failed to probe at port 0x300 on isa0
ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0
le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0
lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: irq maps: 0x201 0x209 0x201 0x201
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0 failed to probe at port 0x300 irq 10 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
bpf: lo0 attached
pcic1: Event mask 0x6
acpi_cpu0: set speed to 100.0%
acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
ad0: success setting UDMA4 on Intel chip
Creating DISK ad0
system power profile changed to 'economy'
acpi_cpu0: set speed to 50.0%
acpi_acad0: Off Line
ACPI-1305: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI-1305: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
ACPI-1305: *** Error: Method execution failed, AE_AML_BUFFER_LIMIT
acpi_cmbat0: battery info corrupted
pcic1: Power: Vcc=-1 Vpp=-1
pcic1: Couldn't autodetect voltage, assuming 5.0V
pcic1: Power applied
pcic1: Output enabled
pcic1: Settling complete
Power complete.
pccard: card inserted, slot 1
pcic1: reset 1 int is 10 stat is 6f
pccard: card removed, slot 1
ar: FreeBSD check1 failed
ad0: <TOSHIBA MK1016GAP/U1.11 A> ATA-5 disk at ata0-master
ad0: 9590MB (19640880 sectors), 19485 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <QSI CD-ROM SCR-242/CJC9> CDROM drive at ata1 as master
acd0: read 4133KB/s (34265KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s2a
ad0s1: type 0x7, start 63, end = 14329979, size 14329917 : OK
ad0s2: type 0xa5, start 14329980, end = 19631429, size 5301450 : OK
start_init: trying /sbin/init
pcic1: reset 1 int is 10 stat is 6f
pcic1: Power: Vcc=-1 Vpp=-1
pcic1: Couldn't autodetect voltage, assuming 5.0V
pcic1: Power applied
pcic1: Output enabled
pcic1: Settling complete
Power complete.
pccard: card inserted, slot 1
pcic1: reset 2 int is 70 stat is 4f
pcic1: reset 3 int is 70 stat is 4f
pcic1: reset 0
pcib1: device pccard0 requested decoded memory range 0xd0000-0xd0000
pcic1: Event mask 0x6
pccard: card removed, slot 1
splash: image decoder found: logo_saver
pcic1: Event mask 0x6
pcic1: Power: Vcc=-1 Vpp=-1
pcic1: Couldn't autodetect voltage, assuming 5.0V
pcic1: Power applied
pcic1: Output enabled
pcic1: Settling complete
Power complete.
pccard: card inserted, slot 1
pcic1: reset 1 int is 10 stat is 4f
pcic1: reset 2 int is 70 stat is 4f
pcic1: reset 3 int is 70 stat is 6f
pcib1: device pccard1 requested unsupported I/O range 0x0-0x47 (decoding 0x2000-0xefff)
pcib1: device pccard1 requested decoded I/O range 0x280-0x2c7
pccard1: Assigning wi0: io 0x280-0x2c7 irq 9 mem 0xd4000-0xd43ff
pcib1: device wi0 requested decoded I/O range 0x280-0x2c7
pcic: I/O win 0 flags 15 280-2c7
wi0: Forcing IRQ to 9
pcic: I/O win 0 flags 5 280-2c7
wi0 at port 0x280-0x2c7 iomem 0xd4000-0xd43ff irq 9 flags 0x10000 slot 1 on pccard1
pcib1: device wi0 requested decoded I/O range 0x280-0x2c7
pcic: I/O win 0 flags 15 280-2c7
wi0: Forcing IRQ to 9
wi0: 802.11 address: 00:a0:f8:90:37:44
wi0: using RF:PRISM2 MAC:HFA3841
wi0: Symbol Firmware: Primary 1.01.02, Station 2.00.17
wi0: wi_has_wep = 6508
bpf: wi0 attached
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3CE0D417.9000504>