Date: Wed, 4 Aug 1999 21:41:22 +0400 From: Alexander Dubinin <alex-m@nstl.nnov.ru> To: FreeBSD-ISDN@FreeBSD.org Subject: USR Sportster ISDN internal problem Message-ID: <6903.990804@nstl.nnov.ru>
next in thread | raw e-mail | index | archive | help
Hello All! Hello Hellmuth Michaelis! I encounter problems with ISDN card USS Sportster ISDN internal with i4b package. It is running on FreeBSD 3.2-STABLE machine in Belgium (named "DialIn"). There is a kernel detection output for this card: -- Cut -- isic0 at 0x268 irq 10 flags 0x7 on isa isic0: USRobotics Sportster ISDN TA intern isic0: ISAC 2085 Version A1/A2 or 2086/2186 Version 1.1 (IOM-2) (Addr=0xc268) isic0: HSCX 82525 or 21525 Version 2.1 (AddrA=0x268, AddrB=0x4268) -- Cut -- I set up isdnd.rc : -- Cut -- system ratesfile = /etc/isdn/isdnd.rates useacctfile = yes acctall = on acctfile = /var/log/isdn.acct rtprio = 25 entry name = NSTL usrdevicename = ipr usrdeviceunit = 0 isdncontroller = 0 isdnchannel = 1 local-phone-incoming = 329xxxxxxx local-phone-dialout = 329xxxxxxx remote-phone-incoming = * remote-phone-dialout = 00078058312319019 remdial-handling = first b1protocol = hdlc dialin-reaction = accept dialout-type = normal idletime-incoming = 120 idletime-outgoing = 30 ratetype = 0 unitlength = 90 unitlengthsrc = none dialretries = 1 entry name = AAM usrdevicename = tel usrdeviceunit = 0 isdncontroller = 0 isdnchannel = -1 local-phone-incoming = NotAvailable remote-phone-incoming = * dialin-reaction = answer answerprog = answer b1protocol=raw idletime-incoming=20 -- Cut -- Same configuration working fine with my ITK ix1 micro card, but then I calling DialIn, I does'nt receive any answer: - Cut - Aug 4 01:23:14 proxy2 isdnd[872]: DBG F_DIAL: local dial out request Aug 4 01:23:14 proxy2 isdnd[872]: DBG select_first_dialno: only one no, no = 9810329xxxxxxx Aug 4 01:23:14 proxy2 isdnd[872]: CHD 00055 BRICS rate 60 sec/unit (unitlen unknown) Aug 4 01:23:14 proxy2 isdnd[872]: CHD 00055 BRICS dialing out from 319018 to 9810329xxxxxxx Aug 4 01:23:15 proxy2 isdnd[872]: CHD 00055 BRICS outgoing call proceeding (ctl 0, ch 0) Aug 4 01:23:15 proxy2 isdnd[872]: DBG find_by_device_for_dialout: entry 0, cdid in use Aug 4 01:23:18 proxy2 isdnd[872]: CHD 00055 BRICS outgoing call disconnected (remote) Aug 4 01:23:18 proxy2 isdnd[872]: CHD 00055 BRICS cause 88: Incompatible destination (Q.850) - Cut - That does this mean? The other end is not an ISDN number? Also, I receive BUSY then calling it by voice... Also, I doesn't see anything in isdntrace! Also, then I trying to call from DialIn I see lot of errors: - Cut - Aug 3 23:20:38 dialin isdnd[181]: DBG F_DIAL: local dial out request Aug 3 23:20:38 dialin isdnd[181]: DBG select_first_dialno: only one no, no = 00078312319018 Aug 3 23:20:38 dialin isdnd[181]: CHD 00002 NSTL rate 60 sec/unit (unitlen unknown) Aug 3 23:20:38 dialin isdnd[181]: CHD 00002 NSTL dialing out from 329xxxxxxx to 00078058312319018 Aug 3 23:20:39 dialin isdnd[181]: DBG find_by_device_for_dialout: entry 0, cdid in use Aug 3 23:20:54 dialin isdnd[181]: WRN msg_disconnect_ind: cdid not found Aug 3 23:20:54 dialin isdnd[181]: CHD 00002 NSTL outgoing call disconnected (remote) Aug 3 23:20:54 dialin isdnd[181]: CHD 00002 NSTL cause 7: layer 1 error / persistent deactivation (I4B) - Cut - And much more in kernel log: - Cut - Aug 3 23:20:40 dialin /kernel: i4b-L1-timer3_expired: state = F4 Awaiting Signal Aug 3 23:20:40 dialin /kernel: i4b-L1-isic_recover: HSCX B: ISTA = 0x0 Aug 3 23:20:40 dialin /kernel: i4b-L1-isic_recover: ISAC: ISTA = 0x0 Aug 3 23:20:40 dialin /kernel: i4b-L1-isic_recover: HSCX B: IMASK = 0xff Aug 3 23:20:40 dialin /kernel: i4b-L1-isic_recover: HSCX A: IMASK = 0xf8 Aug 3 23:20:40 dialin /kernel: i4b-L1-isic_recover: ISAC: IMASK = 0x2a Aug 3 23:20:40 dialin /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 Aug 3 23:20:40 dialin /kernel: i4b-L1-ph_data_req: still in state F3! Aug 3 23:20:40 dialin /kernel: i4b-L1-ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal Aug 3 23:20:42 dialin /kernel: i4b-L3-T303_timeout: SETUP not answered, cr = 38 Aug 3 23:20:42 dialin /kernel: i4b-L3-next_l3state: FSM illegal state, state = ST_OW - Out Wait EST, event = EV_T303EXP - T303 timeout! Aug 3 23:20:42 dialin /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 Aug 3 23:20:42 dialin /kernel: i4b-L1-ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal Aug 3 23:20:42 dialin /kernel: i4b-L1-timer3_expired: state = F4 Awaiting Signal Aug 3 23:20:42 dialin /kernel: i4b-L1-isic_recover: HSCX B: ISTA = 0x0 Aug 3 23:20:42 dialin /kernel: i4b-L1-isic_recover: ISAC: ISTA = 0x0 Aug 3 23:20:42 dialin /kernel: i4b-L1-isic_recover: HSCX B: IMASK = 0xff Aug 3 23:20:42 dialin /kernel: i4b-L1-isic_recover: HSCX A: IMASK = 0xf8 Aug 3 23:20:42 dialin /kernel: i4b-L1-isic_recover: ISAC: IMASK = 0x2a Aug 3 23:20:44 dialin /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 Aug 3 23:20:44 dialin /kernel: i4b-L1-ph_data_req: still in state F3! Aug 3 23:20:44 dialin /kernel: i4b-L1-ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal Aug 3 23:20:46 dialin /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 Aug 3 23:20:46 dialin /kernel: i4b-L1-ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal Aug 3 23:20:46 dialin /kernel: i4b-L1-timer3_expired: state = F4 Awaiting Signal Aug 3 23:20:46 dialin /kernel: i4b-L1-isic_recover: HSCX B: ISTA = 0x0 Aug 3 23:20:46 dialin /kernel: i4b-L1-isic_recover: ISAC: ISTA = 0x0 Aug 3 23:20:46 dialin /kernel: i4b-L1-isic_recover: HSCX B: IMASK = 0xff Aug 3 23:20:46 dialin /kernel: i4b-L1-isic_recover: HSCX A: IMASK = 0xf8 Aug 3 23:20:46 dialin /kernel: i4b-L1-isic_recover: ISAC: IMASK = 0x2a Aug 3 23:20:48 dialin /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 Aug 3 23:20:48 dialin /kernel: i4b-L1-ph_data_req: still in state F3! Aug 3 23:20:48 dialin /kernel: i4b-L1-ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal Aug 3 23:20:50 dialin /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 Aug 3 23:20:50 dialin /kernel: i4b-L1-ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal Aug 3 23:20:50 dialin /kernel: i4b-L1-timer3_expired: state = F4 Awaiting Signal Aug 3 23:20:50 dialin /kernel: i4b-L1-isic_recover: HSCX B: ISTA = 0x0 Aug 3 23:20:50 dialin /kernel: i4b-L1-isic_recover: ISAC: ISTA = 0x0 Aug 3 23:20:50 dialin /kernel: i4b-L1-isic_recover: HSCX B: IMASK = 0xff Aug 3 23:20:50 dialin /kernel: i4b-L1-isic_recover: HSCX A: IMASK = 0xf8 Aug 3 23:20:50 dialin /kernel: i4b-L1-isic_recover: ISAC: IMASK = 0x2a Aug 3 23:20:52 dialin /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 Aug 3 23:20:52 dialin /kernel: i4b-L1-ph_data_req: still in state F3! Aug 3 23:20:52 dialin /kernel: i4b-L1-ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal Aug 3 23:20:54 dialin /kernel: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3 Aug 3 23:20:54 dialin /kernel: i4b-L1-ph_data_req: No Space in TX FIFO, state = F4 Awaiting Signal Aug 3 23:20:54 dialin /kernel: i4b-L1-timer3_expired: state = F4 Awaiting Signal Aug 3 23:20:54 dialin /kernel: i4b-L1-isic_recover: HSCX B: ISTA = 0x0 Aug 3 23:20:54 dialin /kernel: i4b-L1-isic_recover: ISAC: ISTA = 0x0 Aug 3 23:20:54 dialin /kernel: i4b-L1-isic_recover: HSCX B: IMASK = 0xff Aug 3 23:20:54 dialin /kernel: i4b-L1-isic_recover: HSCX A: IMASK = 0xf8 Aug 3 23:20:54 dialin /kernel: i4b-L1-isic_recover: ISAC: IMASK = 0x2a Aug 3 23:20:54 dialin /kernel: i4b-L2-i4b_mph_status_ind: unit 0, cannot access S0 bus! Aug 3 23:20:54 dialin /kernel: i4b-L3-i4b_mdl_status_ind: STI_NOL1ACC: unit 0 no outgoing access to S0 Aug 3 23:20:54 dialin isdnd[181]: WRN msg_disconnect_ind: cdid not found - Cut - Is this a problem with ISDN card, or this is a problem with ISDN line (mean - ISDN line provider) ? Can anyone help me? Sorry for my bad English ;) Best regards, Alexander mailto:alex-m@nstl.nnov.ru To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6903.990804>