Date: Sat, 29 Sep 2001 23:28:02 +0200 (CEST) From: "Hartmann, O." <ohartman@klima.physik.uni-mainz.de> To: <freebsd-stable@freebsd.org> Subject: sshd pronblems in FBSD 4.4-STABLE! Message-ID: <20010929232255.X5492-100000@klima.physik.uni-mainz.de>
next in thread | raw e-mail | index | archive | help
And this for additional information: on this one specific machine I mentioned (dmesg output follows) sshd kills itself after receiving signal HUP (killall -HUP sshd). On all other machines this does not happen! This machine is an SMP system, two 866 PIII, TYAN Thunder 2500 mainboard, 2 GB ECC Registered RAM, this is the head of the kernel config: machine i386 ident ATMOS maxusers 256 options MAXDSIZ="(512*1024*1024)" options MAXSSIZ="(512*1024*1024)" options DFLDSIZ="(512*1024*1024)" options BLKDEV_IOSIZE=8192 options PQ_CACHESIZE=256 options ROOTDEVNAME=\"ufs:amrd0s1a\" options SMP options APIC_IO cpu I686_CPU # aka Pentium Pro(tm) options CPU_ENABLE_SSE options COMPAT_43 options USER_LDT (this is the only part I fiddled around ...) dmesg: Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.4-STABLE #181: Sat Sep 29 15:23:19 CEST 2001 root@atmos.physik.uni-mainz.de:/usr/obj/usr/src/sys/ATMOS Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (868.64-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 2147483648 (2097152K bytes) avail memory = 2088345600 (2039400K bytes) Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 Programming 16 pins in IOAPIC #1 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 3, version: 0x000f0011, at 0xfec01000 Preloaded elf kernel "kernel" at 0xc0385000. Pentium Pro MTRR support enabled Using $PIR table, 12 entries at 0xc00fdf00 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard IOAPIC #1 intpin 13 -> irq 2 IOAPIC #1 intpin 12 -> irq 16 IOAPIC #1 intpin 7 -> irq 17 pci0: <PCI bus> on pcib0 pcib3: <PCI to PCI bridge (vendor=1166 device=0005)> at device 0.1 on pci0 IOAPIC #1 intpin 1 -> irq 18 pci1: <PCI bus> on pcib3 pci1: <NVidia Riva TNT2 graphics accelerator> at 0.0 irq 18 sym0: <896> port 0xf800-0xf8ff mem 0xfeafe000-0xfeafffff,0xfeafac00-0xfeafafff irq 2 at device 1.0 on pci0 sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: handling phase mismatch from SCRIPTS. sym1: <896> port 0xf400-0xf4ff mem 0xfeafc000-0xfeafdfff,0xfeafa800-0xfeafabff irq 16 at device 1.1 on pci0 sym1: Symbios NVRAM, ID 7, Fast-40, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: handling phase mismatch from SCRIPTS. pcib5: <DEC 21154 PCI-PCI bridge> at device 4.0 on pci0 IOAPIC #1 intpin 3 -> irq 19 IOAPIC #1 intpin 0 -> irq 20 pci2: <PCI bus> on pcib5 pcib6: <DEC 21154 PCI-PCI bridge> at device 0.0 on pci2 IOAPIC #1 intpin 2 -> irq 21 pci3: <PCI bus> on pcib6 amr0: <AMI MegaRAID> mem 0xf4000000-0xf7ffffff irq 21 at device 0.0 on pci3 amr0: <Series 471 40 Logical Drive Firmware> Firmware A159, BIOS 3.11, 64MB RAM pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 1.0 irq 19 pci2: <unknown card> (vendor=0x1077, dev=0x1216) at 2.0 irq 20 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcff mem 0xfe900000-0xfe9fffff,0xfeaf9000-0xfeaf9fff irq 17 at device 7.0 on pci0 fxp0: Ethernet address 00:e0:81:00:f0:d7 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 pci0: <Unknown PCI ATA controller> at 15.1 pcib1: <ServerWorks NB6536 2.0HE host to PCI bridge> on motherboard pci4: <PCI bus> on pcib1 pcib2: <ServerWorks host to PCI bridge> on motherboard pci5: <PCI bus> on pcib2 pcib4: <ServerWorks host to PCI bridge> on motherboard pci6: <PCI bus> on pcib4 orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcdfff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <6 virtual consoles, flags=0x200> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 flags 0x10 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 drq 1 flags 0x8 on isa0 ppc0: SMC-like chipset (ECP-only) in ECP mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port APIC_IO: Testing 8254 interrupt delivery APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2 APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0 DUMMYNET initialized (010124) IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging IPsec: Initialized Security Association Processing. Waiting 3 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. amrd0: <MegaRAID logical drive> on amr0 amrd0: 245014MB (501788672 sectors) RAID 5 (optimal) SMP: AP CPU #1 Launched! sa0 at sym1 bus 0 target 5 lun 0 sa0: <HP C5713A H910> Removable Sequential Access SCSI-2 device sa0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit) Mounting root from ufs:/dev/amrd0s1a ch0 at sym1 bus 0 target 5 lun 1 ch0: <HP C5713A H910> Removable Changer SCSI-2 device ch0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit) ch0: 6 slots, 1 drive, 0 pickers, 0 portals cd0 at sym1 bus 0 target 3 lun 0 cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 16) cd0: Attempt to query device size failed: NOT READY, Medium not present link_elf: symbol splash_register undefined fxp0: promiscuous mode enabled linux: syscall fstat64 is obsoleted or not implemented (pid=333) -- MfG O. Hartmann ohartman@klima.physik.uni-mainz.de ---------------------------------------------------------------- IT-Administration des Institutes fuer Physik der Atmosphaere (IPA) ---------------------------------------------------------------- Johannes Gutenberg Universitaet Mainz Becherweg 21 55099 Mainz Tel: +496131/3924662 (Maschinenraum) Tel: +496131/3924144 FAX: +496131/3923532 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20010929232255.X5492-100000>