Date: Tue, 19 Mar 2002 13:54:16 -0800 From: Jon Rust <jpr@vcnet.com> To: questions@freebsd.org Subject: vinum: can't add device Message-ID: <20020319135416.D74985@mail.vcnet.com>
next in thread | raw e-mail | index | archive | help
My config file was initially longer, but given that it chokes on the
first two lines every time, I have snipped it down for clarity here. I
have checked that those devices are actually active-- changed type to
4.2BSD and ran newfs on them just fine. What am I missing? I can add a
new IDE drive without problems. Also, the 2 drives I'm trying to add
were previously part of a vinum install with no issues. Is there a need
to 'bless' them somehow?
Thanks,
jon
On FreeBSD 4.5R:
host:/usr/local/etc{14} # cat vinum.cfg
drive b device /dev/da1h
drive c device /dev/da2h
bus:/usr/local/etc{15} # vinum create vinum.cfg
1: drive b device /dev/da1h
** 1 : Invalid argument
2: drive c device /dev/da2h
** 2 : Invalid argument
0 drives:
0 volumes:
0 plexes:
0 subdisks:
host:/usr/local/etc{17} # disklabel -r da1h
# /dev/da1h:
type: SCSI
disk: da1
label:
flags:
bytes/sector: 512
sectors/track: 17
tracks/cylinder: 85
sectors/cylinder: 1445
cylinders: 49610
sectors/unit: 71687339
rpm: 7200
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # milliseconds
track-to-track seek: 0 # milliseconds
drivedata: 0
8 partitions:
# size offset fstype [fsize bsize bps/cpg]
c: 71687339 0 unused 0 0 # (Cyl. 0 - 49610*)
h: 71687339 0 vinum # (Cyl. 0 - 49610*)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020319135416.D74985>