Date: Thu, 28 Feb 2008 01:27:05 +0600 From: Bostjan Fele <bostjanfe@hotmail.com> To: <questions@freebsd.org> Subject: Problem rebooting FreeBSD 7 Message-ID: <BAY110-W19A95FF3F41ADDB1086379A31A0@phx.gbl>
next in thread | raw e-mail | index | archive | help
Hi,
=20
I have problem with rebooting a FreeBSD. Most of the times it hangs up wait=
ing on CPUs to stop.
Feb 27 19:49:40 ceiling reboot: rebooted by xxxxx
Feb 27 19:49:40 ceiling syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...1 0 1 0 0 done
All buffers synced.
Uptime: 11h51m4s
Rebooting...
cpu_reset: Stopping other CPUs
=20
=20
Tried with hw.acpi.disable_on_reboot and hw.acpi.handle_reboot but did not =
help. But I can power down PC.
=20
Regards,
Bostjan
=20
=20
Copyright (c) 1992-2008 The FreeBSD Project.Copyright (c) 1979, 1980, 1983,=
1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the Univers=
ity of California. All rights reserved.FreeBSD is a registered trademark of=
The FreeBSD Foundation.FreeBSD 7.0-PRERELEASE #9: Tue Feb 26 20:21:27 CET =
2008Timecounter "i8254" frequency 1193182 Hz quality 0CPU: Intel(R) Core(TM=
)2 Quad CPU Q6600 @ 2.40GHz (2400.02-MHz K8-class CPU) Origin =3D "Gen=
uineIntel" Id =3D 0x6fb Stepping =3D 11 Features=3D0xbfebfbff<FPU,VME,DE=
,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,A=
CPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0xe3bd<SSE3,RSVD2,MON,DS_=
CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM> AMD Features=3D0x20100800<SYSCALL,NX=
,LM> AMD Features2=3D0x1<LAHF> Cores per package: 4usable memory =3D 4277=
628928 (4079 MB)avail memory =3D 4116414464 (3925 MB)ACPI APIC Table: <GBT=
GBTUACPI>FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP)=
: APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC=
ID: 3ioapic0: Changing APIC ID to 2ioapic0 <Version 2.0> irqs 0-23 on mot=
herboardacpi0: <GBT GBTUACPI> on motherboardacpi0: [ITHREAD]acpi0: Power Bu=
tton (fixed)acpi0: reservation of 0, a0000 (3) failedacpi0: reservation of =
100000, cf4e0000 (3) failedTimecounter "ACPI-fast" frequency 3579545 Hz qua=
lity 1000acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acp=
i0acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on a=
cpi0Timecounter "HPET" frequency 14318180 Hz quality 900cpu0: <ACPI CPU> on=
acpi0acpi_perf0: <ACPI CPU Frequency Control> on cpu0p4tcc0: <CPU Frequenc=
y Thermal Control> on cpu0cpu1: <ACPI CPU> on acpi0est1: <Enhanced SpeedSte=
p Frequency Control> on cpu1est: CPU supports Enhanced Speedstep, but is no=
t recognized.est: cpu_vendor GenuineIntel, msr 920092006000920device_attach=
: est1 attach returned 6p4tcc1: <CPU Frequency Thermal Control> on cpu1cpu2=
: <ACPI CPU> on acpi0est2: <Enhanced SpeedStep Frequency Control> on cpu2es=
t: CPU supports Enhanced Speedstep, but is not recognized.est: cpu_vendor G=
enuineIntel, msr 920092006000920device_attach: est2 attach returned 6p4tcc2=
: <CPU Frequency Thermal Control> on cpu2cpu3: <ACPI CPU> on acpi0est3: <En=
hanced SpeedStep Frequency Control> on cpu3est: CPU supports Enhanced Speed=
step, but is not recognized.est: cpu_vendor GenuineIntel, msr 9200920060009=
20device_attach: est3 attach returned 6p4tcc3: <CPU Frequency Thermal Contr=
ol> on cpu3acpi_button0: <Power Button> on acpi0pcib0: <ACPI Host-PCI bridg=
e> port 0xcf8-0xcff on acpi0pci0: <ACPI PCI bus> on pcib0vgapci0: <VGA-comp=
atible display> port 0xe200-0xe207 mem 0xf3200000-0xf327ffff,0xe0000000-0xe=
fffffff,0xf3000000-0xf30fffff irq 16 at device 2.0 on pci0pci0: <serial bus=
, USB> at device 26.0 (no driver attached)pci0: <serial bus, USB> at device=
26.1 (no driver attached)pci0: <serial bus, USB> at device 26.2 (no driver=
attached)pci0: <serial bus, USB> at device 26.7 (no driver attached)pci0: =
<multimedia> at device 27.0 (no driver attached)pcib1: <ACPI PCI-PCI bridge=
> irq 16 at device 28.0 on pci0pci1: <ACPI PCI bus> on pcib1pcib2: <ACPI PC=
I-PCI bridge> irq 16 at device 28.4 on pci0pci2: <ACPI PCI bus> on pcib2ata=
pci0: <JMicron JMB368 UDMA133 controller> port 0xc000-0xc007,0xc100-0xc103,=
0xc200-0xc207,0xc300-0xc303,0xc400-0xc40f irq 16 at device 0.0 on pci2atapc=
i0: [ITHREAD]ata2: <ATA channel 0> on atapci0ata2: [ITHREAD]pcib3: <ACPI PC=
I-PCI bridge> irq 17 at device 28.5 on pci0pci3: <ACPI PCI bus> on pcib3re0=
: <RealTek 8168/8111B PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf2000=
000-0xf2000fff irq 17 at device 0.0 on pci3re0: Using 2 MSI messagesmiibus0=
: <MII bus> on re0rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on =
miibus0rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,=
1000baseT-FDX, autore0: Ethernet address: 00:1a:4d:58:3c:d5re0: [FILTER]re=
0: [FILTER]pci0: <serial bus, USB> at device 29.0 (no driver attached)pci0:=
<serial bus, USB> at device 29.1 (no driver attached)pci0: <serial bus, US=
B> at device 29.2 (no driver attached)pci0: <serial bus, USB> at device 29.=
7 (no driver attached)pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0pc=
i4: <ACPI PCI bus> on pcib4pci4: <serial bus, FireWire> at device 7.0 (no d=
river attached)isab0: <PCI-ISA bridge> at device 31.0 on pci0isa0: <ISA bus=
> on isab0atapci1: <Intel ICH9 SATA300 controller> port 0x1f0-0x1f7,0x3f6,0=
x170-0x177,0x376,0xf000-0xf00f,0xfc00-0xfc0f at device 31.2 on pci0ata0: <A=
TA channel 0> on atapci1ata0: [ITHREAD]ata1: <ATA channel 1> on atapci1ata1=
: [ITHREAD]pci0: <serial bus, SMBus> at device 31.3 (no driver attached)ata=
pci2: <Intel ICH9 SATA300 controller> port 0xe800-0xe807,0xe900-0xe903,0xea=
00-0xea07,0xeb00-0xeb03,0xec00-0xec0f,0xed00-0xed0f irq 19 at device 31.5 o=
n pci0atapci2: [ITHREAD]ata3: <ATA channel 0> on atapci2ata3: [ITHREAD]ata4=
: <ATA channel 1> on atapci2ata4: [ITHREAD]sio0: configured irq 4 not in bi=
tmap of probed irqs 0sio0: port may not be enabledsio0: configured irq 4 no=
t in bitmap of probed irqs 0sio0: port may not be enabledsio0: <16550A-comp=
atible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0sio0: type 16550=
A, consolesio0: [FILTER]sio1: configured irq 3 not in bitmap of probed irqs=
0sio1: port may not be enabledsio1: configured irq 3 not in bitmap of prob=
ed irqs 0sio1: port may not be enabledsio1: <16550A-compatible COM port> po=
rt 0x2f8-0x2ff irq 3 on acpi0sio1: type 16550Asio1: [FILTER]atkbdc0: <Keybo=
ard controller (i8042)> at port 0x60,0x64 on isa0atkbd0: <AT Keyboard> irq =
1 on atkbdc0kbd0 at atkbd0atkbd0: [GIANT-LOCKED]atkbd0: [ITHREAD]sc0: <Syst=
em console> at flags 0x100 on isa0sc0: VGA <16 virtual consoles, flags=3D0x=
300>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on is=
a0Timecounters tick every 1.000 msecad0: 381553MB <Seagate ST3400620AS 3.AA=
D> at ata0-master SATA300acd0: DVDR <TSSTcorp CDDVDW SH-S203D/SB00> at ata1=
-master SATA150SMP: AP CPU #1 Launched!SMP: AP CPU #3 Launched!SMP: AP CPU =
#2 Launched!Trying to mount root from ufs:/dev/ad0s1are0: link state change=
d to UPpid 619 (ntpd), uid 0: exited on signal 11 (core dumped)re0: link st=
ate changed to DOWNre0: link state changed to UPre0: link state changed to =
DOWNre0: link state changed to UP
_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY110-W19A95FF3F41ADDB1086379A31A0>