From owner-freebsd-mobile Fri Sep 1 0:17:28 2000 Delivered-To: freebsd-mobile@freebsd.org Received: from mustang.nitrous.net (nitrous.net [63.78.15.50]) by hub.freebsd.org (Postfix) with ESMTP id B649D37B423 for ; Fri, 1 Sep 2000 00:17:15 -0700 (PDT) Received: (from denver@localhost) by mustang.nitrous.net (8.10.0/w00t-1.2) id e8171tj29696 for freebsd-mobile@freebsd.org; Fri, 1 Sep 2000 00:01:55 -0700 (MST) Date: Fri, 1 Sep 2000 00:01:55 -0700 From: Denver Maddux To: freebsd-mobile@freebsd.org Subject: Stinkpad 600E running 4.1 woes Message-ID: <20000901000155.A8180@nitrous.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.7i Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Howdy. Sorry for the length of this, but I've recently upgraded my Thinkpad 600E from 3.4 w/ PAO to 4.1-RELEASE. It's working for most things, (sound, ethernet) but I'm having some problems with PCCard stuffs (go figure). So, I've got the Lucent Wavelan 802.11 IEEE card, which is working like a champ, and a Xircom 56T modem card... which is not working... or may be working but something else is hosed up. I had to play with the kernel config for quite a while to even get to this point, as where before upon insertion of the modem the system was locking up hard. I couldn't get any good output from it to determine the cause of the lockup, but I can assume it was IRQ related. Upon insertion of the card, I see: Aug 31 22:27:48 deviant pccardd[49]: Card "Xircom"("CreditCard Modem CM-56T") [CM-56T] [1.00] matched "Xircom" ("CreditCard Modem CM-56T") [(null)] [(null)] Aug 31 22:27:53 deviant /kernel: sio4 at port 0x2f8-0x2ff irq 3 slot 1 on pccard1 Aug 31 22:27:53 deviant /kernel: sio4: type 16550A with a bogus IIR_TXRDY register Aug 31 22:27:53 deviant pccardd[49]: sio4: Xircom (CreditCard Modem CM-56T) inserted. This looks fishy to me. When running 3.4 PAO the modem card was working just fine. It was being configured on sio3 though. From the old logs: Aug 22 11:16:41 deviant pccardd[55]: Card "Xircom"("CreditCard Modem CM-56T") [CM-56T] [1.00] has function ID 2 Aug 22 11:16:46 deviant /kernel: card0: assign sio3 iobase 0x2e8 irq 3 flags 0x80 Aug 22 11:16:46 deviant /kernel: sio3: type 16550A Aug 22 11:16:46 deviant root: PCMCIA Modem inserted I'm not sure if the "bogus" messages are anything to be worried about, but the confusion on my part is that sio4 is not configured in the kernel. So, I've installed minicom to see if I can talk to the modem, but I can't seem to find a working com port to do so. Accessing cuaa0 causes the system to freeze, and all other com ports give me the error: minicom: cannot open /dev/cuaa3: Device not configured Also noteworthy: I cannot boot the system with the card in. I can insert the card once the system is up, but I cannot gracefully power it down (pccardc power 1 0) and then power it up (pccardc power 1 1) without it locking the system hard. A twin laptop with the exact same configuration (but 32MB less memory) crashes when the card is inserted, period. It's using the same kernel config as this laptop. Below is output from boot -v and my kernel config. I have not changed my pccard.conf file significantly, other than to remove IRQ 5 (sound) from the available IRQs. I have tried using sio in polling mode, but that just makes things worse (wi0 won't work, get- wi0: No irq?!). Same goes for pcic in polling mode. Thanks for any help you can provide, -Denver # 4.1 kernel config for laptop machine i386 cpu I686_CPU ident DEVIANT maxusers 32 options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options ICMP_BANDLIM #Rate limit bad replies options KBD_INSTALL_CDEV # install a CDEV entry in /dev options MROUTING options TCPDEBUG options TCP_DROP_SYNFIN options TCP_RESTRICT_RST options "ICMP_BANDLIM" options INCLUDE_CONFIG_FILE options PCIC_RESUME_RESET options PNPBIOS device isa device pci # Floppy drives device fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # ATA and ATAPI devices device ata0 at isa? port IO_WD1 irq 14 device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 flags 0x1 device psm0 at atkbdc? irq 12 device vga0 at isa? # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? flags 0x100 # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Power management support (see LINT for more options) #device apm0 at nexus? flags 0x20 device apm0 at nexus? # PCCARD (PCMCIA) support device card device pcic0 at isa? irq 10 port 0x3e0 iomem 0xd0000 #device pcic1 at isa? irq 11 port 0x3e2 iomem 0xd4000 disable # Serial (COM) ports #device sio device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 device sio2 at isa? disable port IO_COM3 irq 5 device sio3 at isa? disable port IO_COM4 irq 9 # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device ppi # Parallel port interface device # ISA Ethernet NICs. device ep # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. device wi # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support pseudo-device ppp 1 # Kernel PPP pseudo-device tun # Packet tunnel. pseudo-device pty 256 # Pseudo-ttys (telnet etc) # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter # Audio support device pcm ---------------------------------------------------------- Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1-RELEASE #0: Thu Aug 31 22:13:00 MST 2000 root@deviant:/usr/src/sys/compile/DEVIANT Calibrating clock(s) ... TSC clock: 297779735 Hz, i8254 clock: 1193159 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: Pentium II/Pentium II Xeon/Celeron (297.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x187f9ff real memory = 167575552 (163648K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x0032a000 - 0x09fc7fff, 164225024 bytes (40094 pages) config> en pcic1 No such device: pcic1 Invalid command or syntax. Type `?' for help. config> po pcic1 0x3e2 No such device: pcic1 Invalid command or syntax. Type `?' for help. config> ir pcic1 11 No such device: pcic1 Invalid command or syntax. Type `?' for help. config> iom pcic1 0xd4000 No such device: pcic1 Invalid command or syntax. Type `?' for help. config> f pcic1 0 No such device: pcic1 Invalid command or syntax. Type `?' for help. config> q avail memory = 159686656 (155944K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fd800 bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0x0 pnpbios: Found PnP BIOS data at 0xc00fe700 pnpbios: Entry = f0000:e724 Rev = 1.0 pnpbios: Event flag at 415 Other BIOS signatures found: ACPI: 000fd6e0 Preloaded elf kernel "kernel" at 0xc0311000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03110a8. Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) npx0: on motherboard npx0: INT 16 interface apm0: on motherboard apm: found APM BIOS v1.2, connected at v1.2 pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) pcib0: on motherboard found-> vendor=0x8086, dev=0x7190, revid=0x03 class=06-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base 40000000, size 26 found-> vendor=0x8086, dev=0x7191, revid=0x03 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x104c, dev=0xac1d, revid=0x00 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=4 secondarybus=2 intpin=a, irq=11 map[10]: type 1, range 32, base 50102000, size 12 found-> vendor=0x104c, dev=0xac1d, revid=0x00 class=06-07-00, hdrtype=0x02, mfdev=1 subordinatebus=7 secondarybus=5 intpin=b, irq=11 map[10]: type 1, range 32, base 50101000, size 12 found-> vendor=0x1013, dev=0x6001, revid=0x01 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 50100000, size 12 map[14]: type 1, range 32, base 50000000, size 20 found-> vendor=0x8086, dev=0x7110, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x8086, dev=0x7111, revid=0x01 class=01-01-80, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000fcf0, size 4 found-> vendor=0x8086, dev=0x7112, revid=0x01 class=0c-03-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=11 map[20]: type 1, range 32, base 00008400, size 5 found-> vendor=0x8086, dev=0x7113, revid=0x02 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[90]: type 1, range 32, base 0000efa0, size 4 pci0: on pcib0 pcib1: at device 1.0 on pci0 found-> vendor=0x10c8, dev=0x0005, revid=0x12 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base d0000000, size 24 map[14]: type 1, range 32, base 70000000, size 22 map[18]: type 1, range 32, base 70400000, size 20 pci1: on pcib1 pci1: (vendor=0x10c8, dev=0x0005) at 0.0 irq 11 pcic-pci0: mem 0x50102000-0x50102fff irq 11 at device 2.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq] pcic-pci0: Legacy address set to 0x3e0 PCI Config space: 00: ac1d104c 02100007 06070000 0082a808 10: 50102000 020000a0 b0040200 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c0010b 40: 00eb1014 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00449060 00000000 01818948 fba97543 90: 606282c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 0000000f: 00000000: 30000510: 00000000: 10: 00000000: 00000000: 00000000: 00000000: ExCa registers: 00: 83 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 pcic-pci1: mem 0x50101000-0x50101fff irq 11 at device 2.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq] PCI Config space: 00: ac1d104c 02100007 06070000 0082a808 10: 50101000 020000a0 b0070500 00000000 20: 00000000 00000000 00000000 00000000 30: 00000000 00000000 00000000 03c0020b 40: 00eb1014 000003e1 00000000 00000000 50: 00000000 00000000 00000000 00000000 60: 00000000 00000000 00000000 00000000 70: 00000000 00000000 00000000 00000000 80: 00449060 00000000 01818948 fba97543 90: 606282c0 00000000 00000000 00000000 Cardbus Socket registers: 00: 00000000: 00000000: 30000306: 00000000: 10: 00000000: 00000000: 00000000: 00000000: ExCa registers: 00: 83 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10: 00 00 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 csa0: mem 0x50000000-0x500fffff,0x50100000-0x50100fff irq 11 at device 6.0 on pci0 device_probe_and_attach: csa0 attach returned 6 isab0: at device 7.0 on pci0 isa0: on isab0 atapci0: port 0xfcf0-0xfcff at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfcf0 ata0: mask=03 status0=50 status1=00 ata0: mask=03 status0=50 status1=00 ata0: devices = 0x1 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfcf8 ata1: mask=00 status0=ff status1=ff ata1: probe allocation failed pci0: (vendor=0x8086, dev=0x7112) at 7.2 irq 11 chip1: port 0xefa0-0xefaf at device 7.3 on pci0 pnpbios: 22 devices, largest 980 bytes PNP0000: adding fixed io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding fixed io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 00x4 PNP0000: end config pnpbios: handle 0 device ID PNP0000 (0000d041) PNP0200: adding fixed io range 0-0xf, size=0x10, align=0x1 PNP0200: adding fixed io range 0x80-0x8f, size=0x10, align=0x1 PNP0200: adding fixed io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 PNP0200: end config pnpbios: handle 1 device ID PNP0200 (0002d041) PNP0100: adding irq mask 00x1 PNP0100: adding fixed io range 0x40-0x43, size=0x4, align=0x1 PNP0100: end config pnpbios: handle 2 device ID PNP0100 (0001d041) PNP0b00: adding irq mask 0x100 PNP0b00: adding fixed io range 0x70-0x73, size=0x4, align=0x1 PNP0b00: end config pnpbios: handle 3 device ID PNP0b00 (000bd041) PNP0800: adding fixed io range 0x61-0x61, size=0x1, align=0x1 PNP0800: end config pnpbios: handle 4 device ID PNP0800 (0008d041) PNP0303: adding irq mask 00x2 PNP0303: adding fixed io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding fixed io range 0x64-0x64, size=0x1, align=0x1 PNP0303: end config pnpbios: handle 5 device ID PNP0303 (0303d041) IBM3780: adding irq mask 0x1000 IBM3780: end config pnpbios: handle 6 device ID IBM3780 (80374d24) PNP0c04: adding fixed io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 PNP0c04: end config pnpbios: handle 7 device ID PNP0c04 (040cd041) PNP0700: adding irq mask 0x40 PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x80 PNP0700: adding dma mask 0x4 PNP0700: end config pnpbios: handle 8 device ID PNP0700 (0007d041) PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0 PNP0a03: end config pnpbios: handle 9 device ID PNP0a03 (030ad041) PNP0c02: adding io range 0x22-0x22, size=0x1, align=0 PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0 PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0 PNP0c02: adding io range 0x15e0-0x15ef, size=0x10, align=0 PNP0c02: adding io range 0xef00-0xefaf, size=0xb0, align=0 PNP0c02: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c02: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c02: adding fixed memory32 range 0x100000-0x9ffffff, size=0x9f00000 PNP0c02: adding fixed memory32 range 0xffff0000-0xffffffff, size=0x10000 PNP0c02: end config pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0400: adding irq mask 0x80 PNP0400: adding io range 0x3bc-0x3bf, size=0x4, align=0 PNP0400: end config pnpbios: handle 11 device ID PNP0400 (0004d041) PNP0501: adding irq mask 0000 PNP0501: adding io range 0-0xffffffff, size=0, align=0 PNP0501: end config pnpbios: handle 13 device ID PNP0501 (0105d041) CSC0100: adding io range 0x530-0x537, size=0x8, align=0 CSC0100: adding io range 0x388-0x38b, size=0x4, align=0 CSC0100: adding io range 0x220-0x233, size=0x14, align=0x20 CSC0100: adding irq mask 0x20 CSC0100: adding dma mask 0x2 CSC0100: adding dma mask 0x1 CSC0100: end config pnpbios: handle 14 device ID CSC0100 (0001630e) CSC0110: adding io range 0x538-0x53f, size=0x8, align=0 CSC0110: end config pnpbios: handle 15 device ID CSC0110 (1001630e) CSC0101: adding io range 0x200-0x207, size=0x8, align=0 CSC0101: end config pnpbios: handle 16 device ID CSC0101 (0101630e) CSC0103: adding io range 0-0xffffffff, size=0, align=0x10 CSC0103: adding irq mask 0000 CSC0103: end config pnpbios: handle 17 device ID CSC0103 (0301630e) IBM3765: adding io range 0x130-0x13f, size=0x10, align=0 IBM3765: adding io range 0x2f8-0x2ff, size=0x8, align=0 IBM3765: adding irq mask 00x8 IBM3765: adding irq mask 0x400 IBM3765: adding dma mask 0x80 IBM3765: end config pnpbios: handle 18 device ID IBM3765 (65374d24) IBM0071: adding irq mask 0000 IBM0071: adding io range 0-0xffffffff, size=0, align=0x1 IBM0071: adding dma mask 00 IBM0071: end config pnpbios: handle 19 device ID IBM0071 (71004d24) PNP0e03: adding io range 0x3e0-0x3e1, size=0x2, align=0 PNP0e03: end config pnpbios: handle 20 device ID PNP0e03 (030ed041) PNP0680: adding irq mask 0x4000 PNP0680: adding io range 0x1f0-0x1f7, size=0x8, align=0 PNP0680: adding io range 0x3f6-0x3f7, size=0x2, align=0 PNP0680: adding io range 0xfcf0-0xfcf7, size=0x8, align=0 PNP0680: end config pnpbios: handle 23 device ID PNP0680 (8006d041) PNP0c02: skipping empty range PNP0c02: end config pnpbios: handle 27 device ID PNP0c02 (020cd041) Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ata-: ata0 exists, using next available unit number isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0045 atkbd: keyboard ID 0x54ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0045 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0: at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: on pcic0 pccard1: on pcic0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: irq maps: 0x445 0x445 0x445 0x445 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x41 0x41 0x41 0x41 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio2: not probed (disabled) sio3: not probed (disabled) isa_probe_children: probing PnP devices unknown: can't assign resources unknown0: at port 0-0xf,0x80-0x8f,0xc0-0xdf drq 4 on isa0 unknown1: at port 0x40-0x43 irq 0 on isa0 unknown2: at port 0x70-0x73 irq 8 on isa0 unknown3: at port 0x61 on isa0 unknown: can't assign resources unknown: can't assign resources unknown4: at port 0xf0-0xff irq 13 on isa0 unknown: can't assign resources unknown5: at port 0xcf8-0xcff on isa0 unknown6: at port 0x22,0x2e-0x2f,0x92,0xb2-0xb3,0x4d0-0x4d1,0x15e0-0x15ef,0xef00-0xefaf iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x9ffffff,0xffff0000-0xffffffff on isa0 ppc0: using normal I/O port range ppc0: SPP ppc0: at port 0x3bc-0x3bf irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppi0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port unknown: can't assign resources pcm0: at port 0x530-0x537,0x388-0x38b,0x220-0x233 irq 5 drq 1,0 on isa0 pcm: setmap 30000, ff00; 0xc8751000 -> 30000 pcm: setmap 40000, ff00; 0xc8761000 -> 40000 unknown7: at port 0x538-0x53f on isa0 unknown8: at port 0x200-0x207 on isa0 unknown: can't assign resources unknown: can't assign resources unknown: can't assign resources unknown9: at port 0x3e1-0x3e2 on isa0 unknown: can't assign resources unknown10: on isa0 BIOS Geometries: 0:03df7f3f 0..991=992 cylinders, 0..127=128 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: ppp0 attached new masks: bio 684040, tty 6318b2, net 6718b2 bpf: lo0 attached ata0-master: success setting up UDMA2 mode on PIIX4 chip ad0: ATA-4 disk at ata0 as master ad0: 3909MB (8007552 sectors), 7944 cyls, 16 heads, 63 S/T, 512 B/S ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=2 cblid=0 Creating DISK ad0 Creating DISK wd0 Mounting root from ufs:/dev/ad0s1a ad0s1: type 0xa5, start 63, end = 4201343, size 4201281 : OK ad0s2: type 0xa5, start 4201344, end = 8007551, size 3806208 : OK start_init: trying /sbin/init pccard: card inserted, slot 0 pcic: I/O win 0 flags 15 240-27f pcic: I/O win 0 flags 5 240-27f wi0: at port 0x240-0x27f irq 3 slot 0 on pccard0 pcic: I/O win 0 flags 15 240-27f wi0: Ethernet address: 00:60:1d:f2:c9:15 bpf: wi0 attached Linux-ELF exec handler installed To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message