From owner-freebsd-stable Wed Nov 22 18:35:37 2000 Delivered-To: freebsd-stable@freebsd.org Received: from peak.mountin.net (peak.mountin.net [207.227.119.2]) by hub.freebsd.org (Postfix) with ESMTP id 3185437B4CF for ; Wed, 22 Nov 2000 18:35:31 -0800 (PST) Received: (from daemon@localhost) by peak.mountin.net (8.9.1/8.9.1) id UAA05113; Wed, 22 Nov 2000 20:35:22 -0600 (CST) (envelope-from jeff-ml@mountin.net) Received: from dial-71.max1.wa.cyberlynk.net(207.227.118.71) by peak.mountin.net via smap (V1.3) id sma005111; Wed Nov 22 20:35:19 2000 Message-Id: <4.3.2.20001122201959.00cadd40@207.227.119.2> X-Sender: jeff-ml@207.227.119.2 X-Mailer: QUALCOMM Windows Eudora Version 4.3 Date: Wed, 22 Nov 2000 20:34:49 -0600 To: Drew Sanford From: "Jeffrey J. Mountin" Subject: Re: 4.2 RELEASE - Install hangs during boot Cc: stable@FreeBSD.ORG In-Reply-To: <3A1C7B20.9020808@planetwe.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; format=flowed Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG At 08:04 PM 11/22/00 -0600, Drew Sanford wrote: >I have a system (brand new, clean, never previously had anything installed >on it) on which 4.2 hangs during the boot sequence when I try to install. >The system is : > >Asus A7V MB >Matrox G400 dual head >IBM 45GB ATA100 Deskstar as primary master on the Promise ATA100 controler >CD rom drive as primary slave on the Primary IDE port >CPU: Duron 800 >256 MB PC133 ram >SB Live >Netgear FA310TX rev D2 > >The ATA100 controller is detected, the hang point is always with the last >line as: > >plip0: on ppbus0 Right where the drives should show up. >I will continue to poke and prod and see if I can figure this out. If >anyone has a solution, please let me know. Try installing from the ATA-66 port. That I know works. Jeff Mountin - jeff@mountin.net Systems/Network Administrator FreeBSD - the power to serve To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message