Date: Sat, 02 Jun 2001 12:42:46 -0700 From: Kent Stewart <kstewart@urx.com> To: Jonathan Lemon <jlemon@flugsvamp.com> Cc: Wilko Bulte <wkb@freebie.demon.nl>, Pete French <pfrench@firstcallgroup.co.uk>, freebsd-stable@freebsd.org, jlemon@freebsd.org Subject: Re: Problem with xl driver (cvsup 2001-06-02) Message-ID: <3B1941B6.3FFD2782@urx.com> References: <20010602173041.A15232@f113.hadiko.de> <E156E1q-000Ckv-00@dilbert.fcg.co.uk> <20010602185006.C7587@freebie.demon.nl> <3B193D2E.13A98AB3@urx.com> <20010602142800.G82158@prism.flugsvamp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Jonathan Lemon wrote:
>
> On Sat, Jun 02, 2001 at 12:23:26PM -0700, Kent Stewart wrote:
> > On the 3C509-TX, the only thing that works so far is commenting out the
> > write to the PHY, which is the one of the changes that Lemon made for the
> > Intel card.
> >
> > /*
> > PHY_WRITE(sc, MII_NSPHY_PCR, reg);
> > */
> >
> > I deleted the or's to reg until only setting the led was left and then I
> > backed it all out and commented the PHY_WRITE, which restored networking to
> > the NIC.
> >
> > My system with a 3C509B-TX wasn't affected by the changes to mii/nsphy.c.
>
> This is fairly useful to know. The register definitions come from the
> datasheet for the National part, so my guess is that the part used on
> the 3C509 doesn't quite conform to the National specification.
>
> Please try the following patch. This should change things so that
> the register is only touched for the fxp card; otherwise it is left
> alone.
With this patch, my 3C509-TX works like it used to.
Kent
> --
> Jonathan
>
> Index: nsphy.c
> ===================================================================
> RCS file: /ncvs/src/sys/dev/mii/nsphy.c,v
> retrieving revision 1.8
> diff -u -r1.8 nsphy.c
> --- nsphy.c 2001/03/16 14:17:02 1.8
> +++ nsphy.c 2001/06/02 19:28:34
> @@ -276,7 +276,9 @@
> */
> reg |= 0x0100 | 0x0400;
>
> - PHY_WRITE(sc, MII_NSPHY_PCR, reg);
> + if (strcmp(device_get_name(device_get_parent(sc->mii_dev)),
> + "fxp") == 0)
> + PHY_WRITE(sc, MII_NSPHY_PCR, reg);
>
> switch (IFM_SUBTYPE(ife->ifm_media)) {
> case IFM_AUTO:
--
Kent Stewart
Richland, WA
mailto:kbstew99@hotmail.com
http://kstewart.urx.com/kstewart/index.html
FreeBSD News http://daily.daemonnews.org/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3B1941B6.3FFD2782>