Date: Wed, 6 Dec 2006 02:07:08 -0600 From: "Sam Fourman Jr." <sfourman@gmail.com> To: "illoai@gmail.com" <illoai@gmail.com> Cc: freebsd-chat@freebsd.org Subject: Re: Intel SoundMax Sound Card Support Message-ID: <11167f520612060007i7ed6927fh4d672662db5891b1@mail.gmail.com> In-Reply-To: <11167f520612052347u52d38b9dub06f57be5d9f6f03@mail.gmail.com> References: <11167f520612052006t46ffe6dfhfc3150dac23f964b@mail.gmail.com> <d7195cff0612052027s57d38176uebeebcdfddd92086@mail.gmail.com> <11167f520612052347u52d38b9dub06f57be5d9f6f03@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I figure a dmesg would help
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RC1 #0: Thu Nov 16 05:12:08 UTC 2006
root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
ACPI APIC Table: <INTEL D865PERL>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2423.88-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNTX-ID,<b14>>
Logical CPUs per core: 2
real memory = 1071841280 (1022 MB)
avail memory = 1031311360 (983 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <INTEL D865PERL> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf0000000-0xf7ffffff at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 6200> mem
0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfc000000-0xfcffffff irq
16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0xbc00-0xbc1f mem 0xfe000000-0xfe01ffff irq 18 at device 1.0 on pci2
em0: Ethernet address: 00:07:e9:71:09:ad
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd000-0xd01f
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd400-0xd41f
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd800-0xd81f
irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
0xfe200000-0xfe2003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 2.0 (no driver attached)
fwohci0: <Lucent FW322/323> mem 0xfe102000-0xfe102fff irq 17 at device
7.0 on pci3
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:07:e9:00:00:71:09:ad
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:07:e9:71:09:ad
fwe0: Ethernet address: 02:07:e9:71:09:ad
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH5 SATA150 controller> port
0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f
irq 18 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
fdc0: <floppy drive controller> port
0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Honey Bee Nostromo SpeedPad2, rev 1.10/2.10, addr 2, iclass 3/1
kbd2 at ukbd0
ums0: Honey Bee Nostromo SpeedPad2, rev 1.10/2.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: CDRW <Hewlett-Packard CD-Writer Plus 9300/1.0b> at ata0-master UDMA33
acd1: DVDROM <CREATIVEDVD5240E-1/1.20> at ata0-slave PIO4
ad2: 9641MB <FUJITSU MPG3102AT E 9117> at ata1-master UDMA100
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad2s1a
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
On 12/6/06, Sam Fourman Jr. <sfourman@gmail.com> wrote:
> ok that advice worked now i get a new error in dmesg, it is the same
> as this post
>
> http://lists.freebsd.org/pipermail/freebsd-multimedia/2005-November/003112.html
>
> that is what i get, (Primary Codec not ready) there is source code in
> that post from 2005 out of current? I am using 6.2RC1 can i just diff
> and compile? should this fix not be in 6.2 release?
>
> newbie a little confused
>
> Sam Fourman Jr.
>
> On 12/5/06, illoai@gmail.com <illoai@gmail.com> wrote:
> > On 12/5/06, Sam Fourman Jr. <sfourman@gmail.com> wrote:
> > > hello freebsd-chat@
> > >
> > > I am reasonably new to the *BSD community so I hope this post is to a
> > > "General Questions list"
> > >
> > > I am wondering if there is in fact support in FreeBSD 6.2 or 7.0
> > > current for the Intel SoundMax 4 XL on board sound card it is a 865PE
> > > chip set motherboard, and the dmesg comes up as no driver attached
> > >
> > > Thank you for any help
> >
> > Being wholley unfamiliar with this device, I would suggest
> > loading snd_driver.ko (I think)* at boot and then seeing
> > a) if anything works and
> > b) if the output of
> > hostname# tail /dev/sndstat
> > is enlightening.**
> >
> > *If I am not mangling something, this should load all
> > of the available sound related modules.
> >
> > **dmesg -a | grep pcm (or perhaps . . . | grep snd) as well.
> > --
> > --
> >
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?11167f520612060007i7ed6927fh4d672662db5891b1>