From owner-freebsd-ports  Tue May 18 23:58:40 1999
Delivered-To: freebsd-ports@freebsd.org
Received: from palrel3.hp.com (palrel3.hp.com [156.153.255.226])
	by hub.freebsd.org (Postfix) with ESMTP id 3F6CC14FF8
	for <freebsd-ports@freebsd.org>; Tue, 18 May 1999 23:58:38 -0700 (PDT)
	(envelope-from piet@cup.hp.com)
Received: from hpfsvr02.cup.hp.com (root@hpfsvr02.cup.hp.com [15.28.74.198])
	by palrel3.hp.com (8.8.6 (PHNE_17135)/8.8.5tis) with ESMTP id XAA13524;
	Tue, 18 May 1999 23:58:25 -0700 (PDT)
Received: from piet1.sparc.engr.sgi.com (piet1.cup.hp.com [15.28.75.241]) by hpfsvr02.cup.hp.com with SMTP (8.8.6/8.7.3 TIS Messaging 5.0) id XAA10796; Tue, 18 May 1999 23:58:23 -0700 (PDT)
Date: Tue, 18 May 1999 23:58:23 -0700 (PDT)
From: Piet Delaney <piet@cup.hp.com>
Message-Id: <199905190658.XAA10796@hpfsvr02.cup.hp.com>
To: davidh@progmatics.com.au, davidh@wr.com.au, piet@cup.hp.com,
	hasty@netcom.com
Subject: Sane 1.0.1 - Looks like /usr/local/lib/libsaine-net.so.1 wasn't installed.
Cc: freebsd-ports@freebsd.org, obrien@nuxi.com,
	piet@hpfsvr02.cup.hp.com, piet@piet.net, sane-devel@mostang.com
Sender: owner-freebsd-ports@FreeBSD.ORG
Precedence: bulk
X-Loop: FreeBSD.org


> The scsi pass thru on FreeBSD is strange :(
> 
> Do a man on :
> pass
> camcontrol
> 
> ls -ald /dev/xpt0 /dev/pass1
> crw-------  1 hasty  operator  104,   0 Nov 22 23:38 /dev/xpt0
> 
> crw-rw-r--  1 root  wheel   31,   3 Apr 19 11:20 /dev/pass1

I think using pass1 with minor device 1 would be less confusing.


> 
> pass1 is my umax scanner -- the minor device in /dev/pass1 denotes the 
> pass device printed with dmes:
> {hasty} dmesg | grep pass
> pass3 at ahc1 bus 0 target 5 lun 0
> pass3: <UMAX UMAX S-12 V2.0> Fixed Scanner SCSI-2 device 
> pass3: 3.300MB/s transfers
> 
> cd /usr/local/etc/sane.d
> {hasty} ls
> abaton.conf     dc210.conf      hp.conf         ricoh.conf      tamarack.conf
> agfafocus.conf  dc25.conf       microtek.conf   s9036.conf      umax.conf
> apple.conf      dll.conf        microtek2.conf  saned.conf
> artec.conf      dmc.conf        mustek.conf     sharp.conf
> coolscan.conf   epson.conf      net.conf        snapscan.conf
> {hasty} cat umax.conf
> /dev/pass1

My umax file has more stuff in it:

scsi UMAX * Scanner
scsi LinoHell Office
.
.
.
/dev/scanner



> Make doubly sure that your *.conf entry where is required does point to 
> a string /dev/pass[0-9] otherwise the user cam interface will fail
> to talk to your scsi device --- for instance if I change umax.conf
> to point to /dev/scanner which is a symlink -- the scsi interface
> library will fail:

I changed from using the symbolic link (Like the docs recomend!),
but it didn't change anything. Seems kinda absurd that the guys
that wrote this don't fix it. There must be a rational reason for this.


> 
> Don't forget to create the /dev/xpt0 device or again the cam (scsi) 
> interface library will fail to access your scsi device.
> That should do it. I found all this out by doing a ktrace on "sane" 
> and examining the devices which it opened :(

I ran scanimage with ktrace and it seems to be stopping when scanimage
tried to access /usr/local/lib/libsane-net.so.1 which doesn't exist.
Perhaps the port makefile is missing the install of libsane-net?
I briefly looked at the makefile and didn't see where libsain-net
is installed. 

-piet

 


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message