Date: Wed, 26 Nov 2014 13:43:04 -0700 From: Stephen Mcconnell <stephen.mcconnell@avagotech.com> To: borjam@sarenet.es, morganw@chemikals.org Cc: freebsd-scsi@freebsd.org Subject: RE: MPS driver and latest firmware Message-ID: <4d0fee3179d0d7b7e3294e0206dafafc@mail.gmail.com> In-Reply-To: <CAOtMX2i7-=%2B0kYkJ=-OCUPZoJ61ijppNHXyC1vg_b%2B4xEXG5_g@mail.gmail.com> References: <CALCz5MH47gm-2m9bXbb9dVn-jnOTOBsqFqom-aSGgBdkS83QOg@mail.gmail.com> <DD2BE91C-ADB0-4D75-950D-654A388208AE@sarenet.es> <CAOtMX2i7-=%2B0kYkJ=-OCUPZoJ61ijppNHXyC1vg_b%2B4xEXG5_g@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> ---------- Forwarded message ---------- > From: Borja Marcos <borjam@sarenet.es> > Date: Mon, Oct 27, 2014 at 10:20 AM > Subject: Re: MPS driver and latest firmware > To: Wes Morgan <morganw@chemikals.org> > Cc: freebsd-scsi@freebsd.org > > > > On Oct 26, 2014, at 11:00 PM, Wes Morgan wrote: > > > Hi all, > > > > I have an LSI 9201-16I controller that I updated to the latest > > firmware (20.00.00.00). Immediately I began seeing CAM errors like this: > > > > Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): CAM status: SCSI > > Status Error Oct 22 19:43:56 volatile kernel: (da13:mps0:0:13:0): SCSI > > status: Check Condition Oct 22 19:43:56 volatile kernel: > > (da13:mps0:0:13:0): SCSI sense: ABORTED COMMAND asc:47,3 (Information > > unit iuCRC error detected) Oct 22 19:43:56 volatile kernel: > > (da13:mps0:0:13:0): Retrying command (per sense data) > > > > It did not seem to cause any data corruption, but needless to say that > > kind of error is disconcerting. I was able to force a downgrade to the > > 19.00.00.00 firmware in FreeDOS, after which everything returned to > > normal. > > I tried in a full functional system and I also suffered errors. > > I had to downgrade as well. In case anyone runs into the same problem, the > card > required a flash erase (sas2flsh -o -e 6) before being able to upload the > P19 > firmware, as the NVRAM data was migrated to a new format. > > I wonder if the NVRAM changes include that "sticky" target ID behavior... > > And no, this is not a production system, just testing ;) > > > Cheers, > > > > > > > > Borja. Are either of you still having problems with this or have you determined what is going on? I just got around to trying this here (at Avago - formally LSI) and did not see a problem. Sorry for the delay. Steve > > > ----------- > > > > This is some log information from my change. > > I upgraded the firmware to P20 from sas2flash running on FreeBSD. > Before doing it I exported the ZFS pool > in order to avoid aborted commands leading to corruption. > > This is the syslog showing the controller having problems after the update > to > P20: > > Oct 27 16:26:07 elibm kernel: mps0: Reinitializing controller, Oct 27 > 16:26:15 > elibm kernel: mps0: Warning: io_cmds_active is out of sync - resynching to > 0 Oct > 27 16:26:16 elibm kernel: mps0: Firmware: 20.00.00.00, Driver: > 19.00.00.00-fbsd > Oct 27 16:26:16 elibm kernel: mps0: IOCCapabilities: > 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> > Oct 27 16:26:16 elibm kernel: mps0: mps_reinit finished sc > 0xfffffe0000d84000 post 4 free 3 > Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 > 00 e3 d3 38 00 00 e0 00 length 114688 SMID 706 command timeout cm > 0xfffffe04976a1ea0 ccb 0xfffff80a8d573800 Oct 27 16:28:30 elibm kernel: > (noperiph:mps0:0:4294967295:0): SMID 1 Aborting command > 0xfffffe04976a1ea0 Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): > READ(10). > CDB: 28 00 > 00 e3 d2 58 00 00 e0 00 length 114688 SMID 738 command timeout cm > 0xfffffe04976a48a0 ccb 0xfffff80a8d5bc800 Oct 27 16:28:30 elibm kernel: > (da2:mps0:0:11:0): READ(10). CDB: 28 00 > 00 e3 d2 58 00 00 e0 00 length 114688 SMID 738 terminated ioc 804b scsi 0 > state c xfer 112648 Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): > READ(10). > CDB: 28 00 > 00 e3 d3 38 00 00 e0 00 > Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): CAM status: Command > timeout > Oct 27 16:28:30 elibm kernel: (da2:mps0:0:11:0): Retrying command Oct 27 > 16:28:31 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 > 00 e3 d3 38 00 00 e0 00 > Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): CAM status: SCSI Status > Error > Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): SCSI status: Check > Condition > Oct 27 16:28:31 elibm kernel: (da2:mps0:0:11:0): SCSI sense: UNIT > ATTENTION > asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:28:31 > elibm > kernel: (da2:mps0:0:11:0): Retrying command (per sense data) Oct 27 > 16:29:31 > elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 > 00 e5 25 48 00 00 e0 00 length 114688 SMID 995 command timeout cm > 0xfffffe04976b99f0 ccb 0xfffff80a3b6c5000 Oct 27 16:29:31 elibm kernel: > (noperiph:mps0:0:4294967295:0): SMID 2 Aborting command > 0xfffffe04976b99f0 Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): > READ(10). > CDB: 28 00 > 00 e5 25 48 00 00 e0 00 > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): CAM status: Command > timeout > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): Retrying command Oct 27 > 16:29:32 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 > 00 e5 25 48 00 00 e0 00 > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): CAM status: SCSI Status > Error > Oct 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): SCSI status: Check > Condition Oct > 27 16:29:32 elibm kernel: (da0:mps0:0:9:0): SCSI sense: UNIT ATTENTION > asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:29:32 > elibm > kernel: (da0:mps0:0:9:0): Retrying command (per sense data) Oct 27 > 16:30:33 > elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 > 01 11 26 50 00 00 e0 00 length 114688 SMID 358 command timeout cm > 0xfffffe04976855e0 ccb 0xfffff8017f856800 Oct 27 16:30:33 elibm kernel: > (noperiph:mps0:0:4294967295:0): SMID 3 Aborting command > 0xfffffe04976855e0 Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): > READ(10). > CDB: 28 00 > 01 11 26 30 00 00 e0 00 length 114688 SMID 432 command timeout cm > 0xfffffe049768b700 ccb 0xfffff80a8d5e8800 Oct 27 16:30:33 elibm kernel: > (noperiph:mps0:0:4294967295:0): SMID 4 Aborting command > 0xfffffe049768b700 Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): > READ(10). > CDB: 28 00 > 01 11 25 50 00 00 e0 00 length 114688 SMID 356 command timeout cm > 0xfffffe0497685340 ccb 0xfffff80a3b9c1000 Oct 27 16:30:33 elibm kernel: > (da5:mps0:0:14:0): READ(10). CDB: 28 00 > 74 70 6a 10 00 00 10 00 length 8192 SMID 346 command timeout cm > 0xfffffe0497684620 ccb 0xfffff80a8d5af000 Oct 27 16:30:33 elibm kernel: > (da5:mps0:0:14:0): READ(10). CDB: 28 00 > 74 70 68 10 00 00 10 00 length 8192 SMID 500 command timeout cm > 0xfffffe0497691040 ccb 0xfffff80a8d57c000 Oct 27 16:30:33 elibm kernel: > (da5:mps0:0:14:0): READ(6). CDB: 08 00 > 02 10 10 00 length 8192 SMID 371 command timeout cm 0xfffffe04976866f0 > ccb 0xfffff80a8d56c800 Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): > READ(10). CDB: 28 00 > 01 11 27 30 00 00 e0 00 length 114688 SMID 321 command timeout cm > 0xfffffe0497682550 ccb 0xfffff80a915c5000 Oct 27 16:30:33 elibm kernel: > (da5:mps0:0:14:0): READ(10). CDB: 28 00 > 01 11 26 50 00 00 e0 00 > Oct 27 16:30:33 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 > 74 70 6a 10 00 00 10 00 length 8192 SMID 346 terminated ioc 804b scsi > 0 state c xfer (da5:mps0:0:14:0): CAM status: Command timeout > Oct 27 16:30:33 elibm kernel: (da5: (da5:mps0:0:14:0): READ(10). > CDB: 28 00 74 70 68 10 00 00 10 00 length 8192 SMID 500 terminated ioc > 804b > scsi 0 state c xfer mps0:0:0 > Oct 27 16:30:33 elibm kernel: 14: (da5:mps0:0:14:0): READ(6). > CDB: 08 00 02 10 10 00 length 8192 SMID 371 terminated ioc 804b scsi 0 > state c > xfer 0 > Oct 27 16:30:33 elibm kernel: 0): (da5:mps0:0:14:0): READ(10). > CDB: 28 00 01 11 27 30 00 00 e0 00 length 114688 SMID 321 terminated ioc > 804b scsi 0 state c xfeRetrying command Oct 27 16:30:33 elibm kernel: > (da2:mps0:0:11:0): READ(10). CDB: 28 00 > 01 11 25 50 00 00 e0 00 length 114688 SMID 356 terminated ioc 804b scsi 0 > state c xfer 112648 Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): > READ(10). > CDB: 28 00 > 01 11 26 30 00 00 e0 00 > Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): CAM status: Command > timeout > Oct 27 16:30:33 elibm kernel: (da2:mps0:0:11:0): Retrying command Oct 27 > 16:30:34 elibm kernel: (da2:mps0:0:11:0): READ(10). CDB: 28 00 > 01 11 26 30 00 00 e0 00 > Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 > 74 70 6a 10 00 00 10 00 > Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): CAM status: SCSI Status > Error > Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): CAM status: SCSI Status > Error > Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): SCSI status: Check > Condition > Oct 27 16:30:34 elibm kernel: (da5:mps0:0:14:0): SCSI status: Check > Condition > Oct 27 16:30:34 elibm kernel: (da2:mps0:0:11:0): SCSI sense: UNIT > ATTENTION > asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:30:34 > elibm > kernel: (da5:mps0:0:14:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, > reset, or bus device reset occurred) Oct 27 16:30:34 elibm kernel: > (da2:(da5:mps0:0:mps0:0:11:14:0): 0): > Retrying command (per sense data) > Oct 27 16:36:28 elibm kernel: mps0: <LSI SAS2008> port 0x3f00-0x3fff mem > 0x90ebc000-0x90ebffff,0x912c0000-0x912fffff irq 32 at device 0.0 on pci17 > Oct > 27 16:36:28 elibm kernel: mps0: Firmware: 20.00.00.00, Driver: > 19.00.00.00-fbsd > Oct 27 16:36:28 elibm kernel: mps0: IOCCapabilities: > 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> > Oct 27 16:36:28 elibm kernel: ses0 at mps0 bus 0 scbus0 target 15 lun 0 > Oct 27 > 16:36:28 elibm kernel: ses1 at mps0 bus 0 scbus0 target 26 lun 0 Oct 27 > 16:36:28 > elibm kernel: da0 at mps0 bus 0 scbus0 target 9 lun 0 Oct 27 16:36:28 > elibm > kernel: da1 at mps0 bus 0 scbus0 target 10 lun 0 Oct 27 16:36:28 elibm > kernel: > da2 at mps0 bus 0 scbus0 target 11 lun 0 Oct 27 16:36:28 elibm kernel: da3 > at > mps0 bus 0 scbus0 target 12 lun 0 Oct 27 16:36:28 elibm kernel: da5 at > mps0 bus > 0 scbus0 target 14 lun 0 Oct 27 16:36:28 elibm kernel: da4 at mps0 bus 0 > scbus0 > target 13 lun 0 Oct 27 16:36:28 elibm kernel: da6 at mps0 bus 0 scbus0 > target 17 > lun 0 Oct 27 16:36:28 elibm kernel: da7 at mps0 bus 0 scbus0 target 18 lun > 0 Oct > 27 16:36:28 elibm kernel: da9 at mps0 bus 0 scbus0 target 21 lun 0 Oct 27 > 16:36:28 elibm kernel: da8 at mps0 bus 0 scbus0 target 20 lun 0 Oct 27 > 16:36:28 > elibm kernel: da12 at mps0 bus 0 scbus0 target 27 lun 0 Oct 27 16:36:28 > elibm > kernel: da10 at mps0 bus 0 scbus0 target 22 lun 0 Oct 27 16:36:28 elibm > kernel: > da11 at mps0 bus 0 scbus0 target 23 lun 0 Oct 27 16:37:24 elibm kernel: > (da0:mps0:0:9:0): READ(10). CDB: 28 00 > 00 e6 5d 08 00 00 28 00 length 20480 SMID 396 command timeout cm > 0xfffffe0000e547c0 ccb 0xfffff800261ca800 Oct 27 16:37:24 elibm kernel: > (noperiph:mps0:0:4294967295:0): SMID 1 Aborting command > 0xfffffe0000e547c0 Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): > READ(10). > CDB: 28 00 > 00 e6 5d 08 00 00 28 00 > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): CAM status: Command > timeout > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): Retrying command Oct 27 > 16:37:25 elibm kernel: (da0:mps0:0:9:0): READ(10). CDB: 28 00 > 00 e6 5d 08 00 00 28 00 > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): CAM status: SCSI Status > Error > Oct 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): SCSI status: Check > Condition Oct > 27 16:37:25 elibm kernel: (da0:mps0:0:9:0): SCSI sense: UNIT ATTENTION > asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:37:25 > elibm > kernel: (da0:mps0:0:9:0): Retrying command (per sense data) Oct 27 > 16:37:25 > elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 > 01 14 fb 28 00 00 70 00 length 57344 SMID 292 command timeout cm > 0xfffffe0000e4bf40 ccb 0xfffff8000fd0a000 Oct 27 16:37:25 elibm kernel: > (noperiph:mps0:0:4294967295:0): SMID 2 Aborting command > 0xfffffe0000e4bf40 Oct 27 16:37:25 elibm kernel: (da5:mps0:0:14:0): > READ(10). > CDB: 28 00 > 01 14 fa 48 00 00 e0 00 length 114688 SMID 276 command timeout cm > 0xfffffe0000e4aa40 ccb 0xfffff8007daa0000 Oct 27 16:37:26 elibm kernel: > (da5:mps0:0:14:0): READ(10). CDB: 28 00 > 01 14 fa 48 00 00 e0 00 length 114688 SMID 276 terminated ioc 804b scsi 0 > state > c xfer 113668 Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): READ(10). > CDB: > 28 00 > 01 14 fb 28 00 00 70 00 > Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): CAM status: Command > timeout > Oct 27 16:37:26 elibm kernel: (da5:mps0:0:14:0): Retrying command Oct 27 > 16:37:27 elibm kernel: (da5:mps0:0:14:0): READ(10). CDB: 28 00 > 01 14 fb 28 00 00 70 00 > Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): CAM status: SCSI Status > Error > Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): SCSI status: Check > Condition > Oct 27 16:37:27 elibm kernel: (da5:mps0:0:14:0): SCSI sense: UNIT > ATTENTION > asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:37:27 > elibm > kernel: (da5:mps0:0:14:0): Retrying command (per sense data) Oct 27 > 16:38:27 > elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 > 74 70 6a 10 00 00 10 00 length 8192 SMID 464 command timeout cm > 0xfffffe0000e5a100 ccb 0xfffff8002620e000 Oct 27 16:38:27 elibm kernel: > (noperiph:mps0:0:4294967295:0): SMID 3 Aborting command > 0xfffffe0000e5a100 Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): > READ(10). > CDB: 28 00 > 74 70 68 10 00 00 10 00 length 8192 SMID 459 command timeout cm > 0xfffffe0000e59a70 ccb 0xfffff8000fcfa800 Oct 27 16:38:27 elibm kernel: > (da6:mps0:0:17:0): READ(6). CDB: 08 00 > 02 10 10 00 length 8192 SMID 452 command timeout cm 0xfffffe0000e59140 > ccb 0xfffff8007dab0800 Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): > READ(10). CDB: 28 00 > 01 15 0d 88 00 00 70 00 length 57344 SMID 443 command timeout cm > 0xfffffe0000e58570 ccb 0xfffff8000cf25800 Oct 27 16:38:27 elibm kernel: > (da6:mps0:0:17:0): READ(10). CDB: 28 00 > 01 15 0d 40 00 00 28 00 length 20480 SMID 489 command timeout cm > 0xfffffe0000e5c1d0 ccb 0xfffff8007daa4800 Oct 27 16:38:27 elibm kernel: > (da6:mps0:0:17:0): READ(10). CDB: 28 00 > 01 15 0d 40 00 00 28 00 length 20480 SMID 489 terminated ioc 804b scsi > 0 state c xfer 19460 > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(10). CDB: 28 00 > 74 70 68 10 00 00 10 00 length 8192 SMID 459 terminated ioc 804b scsi > 0 state c xfer (da6:mps0:0:17:0): READ(10). CDB: 28 00 74 70 6a 10 00 > 00 10 00 > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): CAM status: Command > timeout > Oct 27 16:38:27 elibm kernel: (da6:mps0:0:17:0): READ(6). CDB: 08 00 > 02 10 10 00 length 8192 SMID 452 terminated ioc 804b scsi 0 state c xfer 0 > Oct 27 16:38:27 elibm kernel: (da6: (da6:mps0:0:17:0): READ(10). > CDB: 28 00 01 15 0d 88 00 00 70 00 length 57344 SMID 443 terminated ioc > 804b > scsi 0 state c xfermps0:0: 0 Oct 27 16:38:28 elibm kernel: > (da6:mps0:0:17:0): > READ(10). CDB: 28 00 > 74 70 6a 10 00 00 10 00 > Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): CAM status: SCSI Status > Error > Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): SCSI status: Check > Condition > Oct 27 16:38:28 elibm kernel: (da6:mps0:0:17:0): SCSI sense: UNIT > ATTENTION > asc:29,0 (Power on, reset, or bus device reset occurred) Oct 27 16:38:28 > elibm > kernel: (da6:mps0:0:17:0): Retrying command (per sense data) Oct 27 > 16:45:21 > elibm kernel: mps0: Reinitializing controller, Oct 27 16:45:22 elibm > kernel: mps0: > Warning: io_cmds_active is out of sync - resynching to 0 Oct 27 16:45:22 > elibm > kernel: mps0: Firmware: 20.00.00.00, Driver: > 19.00.00.00-fbsd > Oct 27 16:45:22 elibm kernel: mps0: IOCCapabilities: > 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> > Oct 27 16:45:22 elibm kernel: mps0: mps_reinit finished sc > 0xfffffe0000d84000 post 4 free 3 > > ------------ > > > At 17:13, system rebooted with the freshly downgraded controller, this > time to > P19. > > > ------------ > > Oct 27 17:13:16 elibm kernel: mps0: <LSI SAS2008> port 0x3f00-0x3fff mem > 0x90ebc000-0x90ebffff,0x912c0000-0x912fffff irq 32 at device 0.0 on pci17 > Oct > 27 17:13:16 elibm kernel: mps0: Firmware: 19.00.00.00, Driver: > 19.00.00.00-fbsd > Oct 27 17:13:16 elibm kernel: mps0: IOCCapabilities: > 1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc> > Oct 27 17:13:16 elibm kernel: ses0 at mps0 bus 0 scbus0 target 15 lun 0 > Oct 27 > 17:13:16 elibm kernel: ses1 at mps0 bus 0 scbus0 target 22 lun 0 Oct 27 > 17:13:16 > elibm kernel: da1 at mps0 bus 0 scbus0 target 9 lun 0 Oct 27 17:13:16 > elibm > kernel: da2 at mps0 bus 0 scbus0 target 10 lun 0 Oct 27 17:13:16 elibm > kernel: > da0 at mps0 bus 0 scbus0 target 8 lun 0 Oct 27 17:13:16 elibm kernel: da3 > at > mps0 bus 0 scbus0 target 11 lun 0 Oct 27 17:13:16 elibm kernel: da4 at > mps0 bus > 0 scbus0 target 12 lun 0 Oct 27 17:13:16 elibm kernel: da5 at mps0 bus 0 > scbus0 > target 13 lun 0 Oct 27 17:13:16 elibm kernel: da6 at mps0 bus 0 scbus0 > target 14 > lun 0 Oct 27 17:13:16 elibm kernel: da10 at mps0 bus 0 scbus0 target 19 > lun 0 > Oct 27 17:13:16 elibm kernel: da7 at mps0 bus 0 scbus0 target 16 lun 0 Oct > 27 > 17:13:16 elibm kernel: da9 at mps0 bus 0 scbus0 target 18 lun 0 Oct 27 > 17:13:16 > elibm kernel: da8 at mps0 bus 0 scbus0 target 17 lun 0 Oct 27 17:13:16 > elibm > kernel: da11 at mps0 bus 0 scbus0 target 20 lun 0 Oct 27 17:13:16 elibm > kernel: > da12 at mps0 bus 0 scbus0 target 21 lun 0 > > > > > > sas2ircu output showing the SAS devices, which are mostly SATA disks. > The setup is > satisfactorily functional with the P19 firmware. > > > > > root@elibm:~ # sas2ircu 0 display > LSI Corporation SAS2 IR Configuration Utility. > Version 18.00.00.00 (2013.11.18) > Copyright (c) 2009-2013 LSI Corporation. All rights reserved. > > Read configuration has been initiated for controller 0 > ------------------------------------------------------------------------ > Controller information > ------------------------------------------------------------------------ > Controller type : SAS2008 > BIOS version : 7.37.00.00 > Firmware version : 19.00.00.00 > Channel description : 1 Serial Attached SCSI > Initiator ID : 0 > Maximum physical devices : 255 > Concurrent commands supported : 3432 > Slot : Unknown > Segment : 0 > Bus : 17 > Device : 0 > Function : 0 > RAID Support : No > ------------------------------------------------------------------------ > IR Volume information > ------------------------------------------------------------------------ > ------------------------------------------------------------------------ > Physical device information > ------------------------------------------------------------------------ > Initiator at ID #0 > > Device is a Hard disk > Enclosure # : 2 > Slot # : 16 > SAS Address : 5000c50-0-05b5-ce25 > State : Ready (RDY) > Size (in MB)/(in sectors) : 140014/286749479 > Manufacturer : SEAGATE > Model Number : ST9146803SS > Firmware Revision : FS03 > Serial No : 3SD02W5L > GUID : N/A > Protocol : SAS > Drive Type : SAS_HDD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 17 > SAS Address : 5005076-0-3e8e-81a2 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08549F > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 18 > SAS Address : 5005076-0-3e8e-81a3 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08548T > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 19 > SAS Address : 5005076-0-3e8e-81a4 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08568E > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 20 > SAS Address : 5005076-0-3e8e-81a5 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08547X > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 21 > SAS Address : 5005076-0-3e8e-81a6 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08518Y > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 2 > Slot # : 22 > SAS Address : 5005076-0-3e8e-81a7 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08556K > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Enclosure services device > Enclosure # : 2 > Slot # : 255 > SAS Address : 5005076-0-3e8e-81b9 > State : Standby (SBY) > Manufacturer : IBM-ESXS > Model Number : SAS EXP BP > Firmware Revision : 61A6 > Serial No : 00000006 > GUID : N/A > Protocol : SAS > Device Type : Enclosure services device > > Device is a Hard disk > Enclosure # : 3 > Slot # : 0 > SAS Address : 5005076-0-3e8e-86e9 > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08550R > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 3 > Slot # : 1 > SAS Address : 5005076-0-3e8e-86ea > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08911Y > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 3 > Slot # : 2 > SAS Address : 5005076-0-3e8e-86eb > State : Ready (RDY) > Size (in MB)/(in sectors) : 953869/1953525167 > Manufacturer : ATA > Model Number : Samsung SSD 840 > Firmware Revision : BB0Q > Serial No : S1D9NEADA08811L > GUID : N/A > Protocol : SATA > Drive Type : SATA_SSD > > Device is a Hard disk > Enclosure # : 3 > Slot # : 13 > SAS Address : 5000c50-0-05b5-e531 > State : Ready (RDY) > Size (in MB)/(in sectors) : 140014/286749479 > Manufacturer : SEAGATE > Model Number : ST9146803SS > Firmware Revision : FS03 > Serial No : 3SD02STR > GUID : N/A > Protocol : SAS > Drive Type : SAS_HDD > > Device is a Hard disk > Enclosure # : 3 > Slot # : 14 > SAS Address : 5000c50-0-05b5-d489 > State : Ready (RDY) > Size (in MB)/(in sectors) : 140014/286749479 > Manufacturer : SEAGATE > Model Number : ST9146803SS > Firmware Revision : FS03 > Serial No : 3SD02TV1 > GUID : N/A > Protocol : SAS > Drive Type : SAS_HDD > > Device is a Hard disk > Enclosure # : 3 > Slot # : 15 > SAS Address : 5000c50-0-05b5-f0ad > State : Ready (RDY) > Size (in MB)/(in sectors) : 140014/286749479 > Manufacturer : SEAGATE > Model Number : ST9146803SS > Firmware Revision : FS03 > Serial No : 3SD03F4C > GUID : N/A > Protocol : SAS > Drive Type : SAS_HDD > > Device is a Enclosure services device > Enclosure # : 3 > Slot # : 255 > SAS Address : 5005076-0-3e8e-86f9 > State : Standby (SBY) > Manufacturer : IBM-ESXS > Model Number : SAS EXP BP > Firmware Revision : 61A6 > Serial No : 00000006 > GUID : N/A > Protocol : SAS > Device Type : Enclosure services device > ------------------------------------------------------------------------ > Enclosure information > ------------------------------------------------------------------------ > Enclosure# : 1 > Logical ID : 500605b0:07ba2100 > Numslots : 8 > StartSlot : 0 > Enclosure# : 2 > Logical ID : 50050760:3e8e81a0 > Numslots : 25 > StartSlot : 0 > Enclosure# : 3 > Logical ID : 50050760:3e8e86e0 > Numslots : 25 > StartSlot : 0 > ------------------------------------------------------------------------ > SAS2IRCU: Command DISPLAY Completed Successfully. > SAS2IRCU: Utility Completed Successfully. > root@elibm:~ # > > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4d0fee3179d0d7b7e3294e0206dafafc>