Date: Mon, 14 Mar 2005 17:40:08 -0600 From: Eric <eric@bsdunix.us> To: Chuck Robey <chuckr@chuckr.org> Cc: freebsd-questions@freebsd.org Subject: Re: logitech cordless mouse w/ freebsd 5.3 stable Message-ID: <423620D8.1030900@bsdunix.us> In-Reply-To: <20050314151838.K74062@april.chuckr.org> References: <4234F80A.80901@bsdunix.us> <20050313215820.B74062@april.chuckr.org> <4235ADFE.2050400@bsdunix.us> <20050314151838.K74062@april.chuckr.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Chuck Robey wrote: >On Mon, 14 Mar 2005, Eric wrote: > > > >>I removed above this to save some bandwidth, as bandwidth is not free >>every where in the world :) >> >>Chuck Robey wrote: >> >> >> >>>>I then edit the pointer section of /etc/X11/xorg.conf to: >>>> >>>> Identifier "Mouse1" >>>> Driver "mouse" >>>> Option "Protocol" "Auto" >>>> Option "Device" "/dev/bpsm0" >>>> >>>> >>>> >>>> >>>I am running FreeBSD-6.0-current, but I bet it works for you like it works >>>(just fine) for me. Try it, what have you got to lose? However, if it >>>works, you owe us a usage report, Sirrah! >>> >>>Anyhow, FreeBSD is not terribly willing to share the mouse. When it >>>boots, the stupid thing will start 'moused' processes on both mouses. >>>Check this with: >>> >>>ps -ax | grep mouse >>> >>>if it's like I think it is, one of the lines that come back will report a >>>device filename of ums0. You need this process dead, dead, dead. You >>>*could*, I suppose, edit /etc/usbd.conf ... >>> >>>After you do that, the stuff you have above for Xorg isn't enough either, >>>cause you left out the wheel. take those lines out and replace them with >>> >>>Section "InputDevice" >>> Identifier "Mouse0" >>> Driver "mouse" >>> Option "Protocol" "auto" >>> Option "Device" "/dev/ums0" >>> Option "Buttons" "5" >>> Option "ZAxisMapping" "4 5" >>>EndSection >>> >>>Don't forget, at the top: >>> >>>Section "ServerLayout" >>> Identifier "X.org Configured" >>> Screen 0 "Screen0" 0 0 >>> InputDevice "Mouse0" "CorePointer" >>> InputDevice "Keyboard0" "CoreKeyboard" >>>EndSection >>> >>> >>>Try this, tell me how it works. >>> >>> >>> >>> >>> >>Chuck, >> Setting my mouse driver to "ums0", will make X crash before loading. >>My box never reported the ums0 device/the usb mouse. The usbd is >>running. There is no moused processes running on this box, as it is >>disabled in /etc/rc.conf. I get the scroll wheel to work as a middle >>button, but you are right, the scroll feature does not work. >> >> > >Just 1 thing I need to confirm: did you kill the moused process BEFORE >starting X? Because if you didn't, that's exactly what happens to me. I >need to kill the moused process that is tying up ums0, then I can start up >X. > > > I do not have any problem with the moused running at all (after doing the steps in the original email). Also as far as my os is concerned there is no USB mouse attached to the workstation. We are using different versions of FreeBSD :) By editing /etc/rc.conf and adding this line at the end: moused_enable="NO" , and then rebooting, keeps my moused from starting. I suppose I could have done #killall -9 moused *and* edited /etc/rc.conf with no immediate reboot. When I appended the line to /boot/device.hints, I rebooted for that too. This box is a workstation with one user, me, so uptime is not a issue. As far as the order of the steps, please see the original email. I did start X last after doing everything in the original email, as the mouse did not work at all until all steps were complete. >> Option "Buttons" "5" >> Option "ZAxisMapping" "4 5" >> >>Setting those two options does not enable the scroll wheel. I think that >>is due to the generic PS/2 driver reported in dmesg. Having a working >>scroll wheel was never a issue for me :) Also note, I never tried >>FreeBSD 6.x . >> >> >> > >No, let's fix the mouse first, then we worry about the mouse wheel. > > > I re-read "man psm" and I believe the flags i set (/boot/device.hints) keep the mouse driver at level 0. A level 1 driver would make the scroll wheel work. When I boot with a level 1 driver, my mouse is completly dead in X. It is beyond my skills and desire, to code a custom driver :) >>I am not sure if the following info matters or not: >> >>This is included as it may give you some hints for fixing the wheel >>feature. This mouse config was a combination of some google hints that >>led me to look at, 'man psm', 'man device.hints', and my experience >>with Freebsd 4.x. FreeBSD 4.x taught me that using /dev/bpsm0 in >>the X config would work, with this mouse and this kvm. I didn't try >>setting up the moused in /etc/rc.conf with FreeBSD 5.x. In FreeBSD 4.x >>adding the bpsm0 config to /etc/rc.conf just lead to error messages >>getting reported to my shells every so often. >> >>Here is some additional info: >> >> >>%ls /dev >>acd0 ata fido psm0 ttyv3 >>acpi atkbd0 geom.ctl ptyp0 ttyv4 >>ad0 audio0.0 io ptyp1 ttyv5 >>ad0s1 audio0.1 kbd0 ptyp2 ttyv6 >>ad0s10 bpf0 klog ptyp3 ttyv7 >>ad0s1a bpsm0 kmem random ttyv8 >>ad0s1b console log sndstat ttyv9 >>ad0s1c consolectl lpt0 stderr ttyva >>ad0s1d ctty lpt0.ctl stdin ttyvb >>ad0s1e cuaa0 mdctl stdout ttyvc >>ad0s1f cuaia0 mem sysmouse ttyvd >>ad0s2 cuala0 mixer0 ttyd0 ttyve >>ad0s3 devctl net ttyid0 ttyvf >>ad0s4 devstat net1 ttyld0 urandom >>ad0s5 dsp0.0 net2 ttyp0 usb >>ad0s6 dsp0.1 net3 ttyp1 usb0 >>ad0s7 dspW0.0 network ttyp2 usb1 >>ad0s8 dspW0.1 nfs4 ttyp3 usb2 >>ad0s9 dspr0.1 null ttyv0 xpt0 >>agpgart fd pci ttyv1 zero >>apm fd0 ppi0 ttyv2 >>%cat /etc/rc.conf >> >># -- sysinstall generated deltas -- # Mon Jan 3 05:51:08 2005 >># Created: Mon Jan 3 05:51:08 2005 >># Enable network daemons for user convenience. >># Please make all changes to this file, not to /etc/defaults/rc.conf. >># This file now contains just the overrides from /etc/defaults/rc.conf. >>hostname="demon-spawn.bsdunix.us" >>ifconfig_rl0="DHCP" >>linux_enable="YES" >>usbd_enable="YES" >>moused_port="/dev/psm0" >>moused_type="auto" >>moused_enable="NO" >>% >>%ps auxw | grep usbd >>root 362 0.0 0.2 1240 780 ?? Ss 5:51AM 0:00.01 /usr/sbin/usbd >>eric 871 0.0 0.1 348 232 p3 R+ 7:38AM 0:00.00 grep usbd >> >>%ps auxw | grep mouse >>eric 1240 0.0 0.5 2276 1760 p1 RV 9:18AM 0:00.00 grep mouse >>(csh) >> >> >>psm0: <PS/2 Mouse> flags 0x204 irq 12 on atkbdc0 >>psm0: [GIANT-LOCKED] >>psm0: model Generic PS/2 mouse, device ID 0 >> >> >> > >---------------------------------------------------------------------------- >Chuck Robey | Interests include C & Java programming, FreeBSD, >chuckr@chuckr.org | electronics, communications, and SF/Fantasy. > >New Year's Resolution: I will not sphroxify gullible people into looking up >fictitious words in the dictionary (on the wall at my old fraternity, >Signa Phi Nothing). >---------------------------------------------------------------------------- > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?423620D8.1030900>