Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 28 Sep 2003 19:44:06 +0200
From:      Alex de Kruijff <freebsd@akruijff.dds.nl>
To:        nw1 <network101@covad.net>
Cc:        freebsd-questions@freebsd.org
Subject:    Re: FreeBSD 4.8-P10 --Mouse doesn't move in the console or XFree86--
Message-ID:  <20030928174406.GB16713@dds.nl>
In-Reply-To: <020f01c385b5$668dce10$0300a8c0@install>
References:  <020f01c385b5$668dce10$0300a8c0@install>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Sep 28, 2003 at 07:41:04AM -0400, nw1 wrote:
> Neither mouse will work in the console or in XFree86.
> 
> Gigabyte GA-6BXDS = main board
> BIOS= AWARD (2A69KG01) ver. 4.51PG
> 
> In the PCI/ISA section of the BIOS, a USB setting of: "Assign IRQ For USB: Enabled" (is
> set)
> There is also a "USB Keyboard Support" setting within the BIOS's  "INTERGRATED
> PEROPHERALS" section; I have tried this setting to both "Enabled and Disabled".
> 
> There aren't any other USB settings in this BIOS.
> 
> We are using these devices that are known working devices.
> Mouse-1 is: Logitech | model: M-BD58 | optical corded wheel
> Mouse-2 is: Logitech | model: M-RM67A | Optical cordless wheel
> 
> Our Kernel:
> # USB support
> device          uhci            # UHCI PCI->USB interface
> device          usb             # USB Bus (required)
> device          ums             # Mouse
> pseudo-device   ether           # Ethernet support
> 
> Our /etc/rc.conf:
> # grep -i mouse /etc/rc.conf
> moused_enable="YES"
> moused_port="/dev/ums0"
> # grep -i usb /etc/rc.conf
> usbd_enable="YES"
> 
> Our /dev:
> ls -l /dev | grep -i ums
> crw-rw----   1 root   operator  111,   0 Sep 27 13:16 ums0
> 
> dmesg reports:
> # dmesg | grep -i usb
> uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xa000-0xa01f irq 10 at device 7.2
> on pci0
> usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> usb0: USB revision 1.0
> ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
> 
> Upon booting into the OS, using the above BIOS, and other settings --with either of the
> above devices; the mouse is seen on screen, but it refuse to respond while moving the
> hand-held device.  Should we unplug one mouse (from either usb port) to test the other
> mouse, we receive the following on-screen message(s), respectively of the motherboards USB
> port we were using:
> 
> uhub0: device problem, disabling port 2
> uhub0: device problem, disabling port 1
> 
> When we plug the devices back in to either of the motherboards mouse ports, there's no
> indication at all, from the OS, that a USB device was attached.
> 
> Reminder: these devices are in perfect working order.

It seems to be in order. As i see it thare are two posibilties. 1) Your
mouse isn't supported or 2) There is a (new) bug in the system.

Did it work on previous version of FreeBSD?

-- 
Alex

Articles based on solutions that I use:
http://www.kruijff.org/alex/index.php?dir=docs/FreeBSD/



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030928174406.GB16713>