From owner-freebsd-scsi Sun Oct 27 23:51:49 1996 Return-Path: owner-freebsd-scsi Received: (from root@localhost) by freefall.freebsd.org (8.7.5/8.7.3) id XAA10991 for freebsd-scsi-outgoing; Sun, 27 Oct 1996 23:51:49 -0800 (PST) Received: from irz301.inf.tu-dresden.de (irz301.inf.tu-dresden.de [141.76.1.11]) by freefall.freebsd.org (8.7.5/8.7.3) with SMTP id XAA10983 for ; Sun, 27 Oct 1996 23:51:44 -0800 (PST) Received: from sax.sax.de (sax.sax.de [193.175.26.33]) by irz301.inf.tu-dresden.de (8.6.12/8.6.12-s1) with ESMTP id IAA00469; Mon, 28 Oct 1996 08:50:02 +0100 Received: (from uucp@localhost) by sax.sax.de (8.6.12/8.6.12-s1) with UUCP id IAA20881; Mon, 28 Oct 1996 08:50:01 +0100 Received: (from j@localhost) by uriah.heep.sax.de (8.8.2/8.6.9) id IAA03071; Mon, 28 Oct 1996 08:33:12 +0100 (MET) From: J Wunsch Message-Id: <199610280733.IAA03071@uriah.heep.sax.de> Subject: Re: strange ncr problems To: freebsd-scsi@FreeBSD.org (FreeBSD SCSI list) Date: Mon, 28 Oct 1996 08:33:12 +0100 (MET) Cc: andrew@why.whine.com (Andrew Herdman) Reply-To: joerg_wunsch@uriah.heep.sax.de (Joerg Wunsch) In-Reply-To: from Andrew Herdman at "Oct 27, 96 09:07:30 pm" X-Phone: +49-351-2012 669 X-PGP-Fingerprint: DC 47 E6 E4 FF A6 E9 8F 93 21 E0 7D F9 12 D6 4E X-Mailer: ELM [version 2.4ME+ PL17 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-scsi@FreeBSD.org X-Loop: FreeBSD.org Precedence: bulk As Andrew Herdman wrote: > Just a question about the ncr driver in the 2.2-960801-SNAP. I don't have -chat is the wrong list for this. Redirected to -scsi. > much access to the machine but the following happens some times at > bootup...... ignore the config screen..... > ncr0 rev 1 int a irq 11 on pci0:12 > ncr0 waiting for scsi devices to settle > (ncr0:2:0): "NEC D3827 0410" type 0 fixed SCSI 2 > sd0(ncr0:2:0): Direct-Access > sd0(ncr0:2:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. > 1033MB (2116800 512 byte sectors) > changing root device to sd0a > spec_getpages: I/O read error > vm_fault: pager input (probably hardware) error, PID 30 failure > uid 0 on /: out of inodes > pid 30 (hostname), uid 0: exited on signal 11 > ncr0: SCSI phase error fixup: CCB already dequeued (0xf0d73c00) > ncr0: restart (ncr dead ?). > sd0(ncr0:2:0): UNIT ATTENTION info?:ffffffff asc:29,0 > sd0(ncr0:2:0): Power on, reset, or bus device reset occurred > , retries:3 > sd0(ncr0:2:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. > sd0(ncr0:2:0): NOT READY info?:ffffffff asc:4,1 > sd0(ncr0:2:0): Logical unit is in process of becoming ready > , retries:2 > sd0(ncr0:2:0): NOT READY info?:ffffffff asc:4,1 > sd0(ncr0:2:0): Logical unit is in process of becoming ready > , retries:1 -- cheers, J"org joerg_wunsch@uriah.heep.sax.de -- http://www.sax.de/~joerg/ -- NIC: JW11-RIPE Never trust an operating system you don't have sources for. ;-)