Date: Mon, 28 Oct 1996 08:33:12 +0100 (MET) From: J Wunsch <j@uriah.heep.sax.de> To: freebsd-scsi@FreeBSD.org (FreeBSD SCSI list) Cc: andrew@why.whine.com (Andrew Herdman) Subject: Re: strange ncr problems Message-ID: <199610280733.IAA03071@uriah.heep.sax.de> In-Reply-To: <Pine.BSF.3.95.961027210353.8129A-100000@why> from Andrew Herdman at "Oct 27, 96 09:07:30 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
As Andrew Herdman wrote: > Just a question about the ncr driver in the 2.2-960801-SNAP. I don't have -chat is the wrong list for this. Redirected to -scsi. > much access to the machine but the following happens some times at > bootup...... ignore the config screen..... > ncr0 <ncr 53c810 scsi> rev 1 int a irq 11 on pci0:12 > ncr0 waiting for scsi devices to settle > (ncr0:2:0): "NEC D3827 0410" type 0 fixed SCSI 2 > sd0(ncr0:2:0): Direct-Access > sd0(ncr0:2:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. > 1033MB (2116800 512 byte sectors) > changing root device to sd0a > spec_getpages: I/O read error > vm_fault: pager input (probably hardware) error, PID 30 failure > uid 0 on /: out of inodes > pid 30 (hostname), uid 0: exited on signal 11 > ncr0: SCSI phase error fixup: CCB already dequeued (0xf0d73c00) > ncr0: restart (ncr dead ?). > sd0(ncr0:2:0): UNIT ATTENTION info?:ffffffff asc:29,0 > sd0(ncr0:2:0): Power on, reset, or bus device reset occurred > , retries:3 > sd0(ncr0:2:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. > sd0(ncr0:2:0): NOT READY info?:ffffffff asc:4,1 > sd0(ncr0:2:0): Logical unit is in process of becoming ready > , retries:2 > sd0(ncr0:2:0): NOT READY info?:ffffffff asc:4,1 > sd0(ncr0:2:0): Logical unit is in process of becoming ready > , retries:1 -- cheers, J"org joerg_wunsch@uriah.heep.sax.de -- http://www.sax.de/~joerg/ -- NIC: JW11-RIPE Never trust an operating system you don't have sources for. ;-)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199610280733.IAA03071>