Date: Sat, 09 Sep 2000 09:55:19 -0700 From: Wes Warner <ufodziner@earthlink.net> To: freebsd-scsi@FreeBSD.ORG, freebsd-smp@FreeBSD.ORG Subject: Re: adaptec 2940uw with smp kernel on a bp6 Message-ID: <39BA6B77.CA1D2C5F@earthlink.net>
next in thread | raw e-mail | index | archive | help
I updated both the scsi card bios and my mobo bios to see if that helped
already. I didn't get any improvement. I currently am running
slackware and it runs fine both smp and the scsi card. It works with
either 2.2.x or 2.4.test.x. When I have scsi support enabled in the
kernel the machine only gives me the error message, it will not totally
boot. I don't ever get a terminal, it just hangs.
Thanks,
Wes
"William S. Duncanson" wrote:
>
> Hm, I have a Tyan Tiger 100 with dual processors running in SMP mode with a
> 2940UW. I would suggest making sure that the BIOS for the motherboard and
> the card are up to date. Does any other MP capable OS work? What are the
> outputs of dmesg and mptable?
>
> At 00:46 9/9/2000, Wes Warner wrote:
>
> >Hi, I have a abit bp6 and an adaptec 2940 uw scsi card. If I compile a
> >SMP
> >kernel with cupport for my scsi card I get this error...
> >
> >Waiting 15 seconds for SCSI devices to settle
> >Timeout SCB handled by another timeout
> >(probe1:ahc0:0:1:0)SCB 0xd timedout
> >ahc0 Issued channel A bus reset 14 SCBs Aborted
> >
> >I can run SMP fine without the card or run with the card and no SMP, but
> >I can't do them both together. Is there a fix for this?
> >
> > Thanks,
> > Wes
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?39BA6B77.CA1D2C5F>