From owner-freebsd-current Tue Mar 9 13:45:16 1999 Delivered-To: freebsd-current@freebsd.org Received: from orthanc.kellogg.nwu.edu (orthanc.kellogg.nwu.edu [129.105.197.36]) by hub.freebsd.org (Postfix) with ESMTP id 7179B15019 for ; Tue, 9 Mar 1999 13:45:10 -0800 (PST) (envelope-from pcox@orthanc.kellogg.nwu.edu) Received: (from pcox@localhost) by orthanc.kellogg.nwu.edu (8.9.3/8.9.1) id PAA00606 for current@freebsd.org; Tue, 9 Mar 1999 15:44:53 -0600 (CST) (envelope-from pcox) Date: Tue, 9 Mar 1999 15:44:52 -0600 From: Peter Cox To: current@freebsd.org Subject: Secondary IDE woes Message-ID: <19990309154452.A519@orthanc.kellogg.nwu.edu> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.3i Sender: owner-freebsd-current@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi all, I recompiled -current last week, and have been having intermittent problems with my secondary IDE controller not being detected since. Sometimes when I boot, it sees the controller with no problems. Most often though, it doesn't detect it at all. I recompiled again with today's sources and the problem persists. Here's the dmesg output, any help would be appreciated. Cheers, Peter Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-CURRENT #19: Tue Mar 9 15:21:37 CST 1999 pcox@orthanc.kellogg.nwu.edu:/usr/src/sys/compile/ORTHANC Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 297998769 Hz CPU: Pentium II (298.00-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x634 Stepping=4 Features=0x80f9ff real memory = 134217728 (131072K bytes) avail memory = 127864832 (124868K bytes) Preloaded elf kernel "kernel" at 0xf02ad000. Probing for devices on PCI bus 0: chip0: rev 0x03 on pci0.0.0 chip1: rev 0x03 on pci0.1.0 chip2: rev 0x01 on pci0.7.0 ide_pci0: rev 0x01 on pci0.7.1 chip3: rev 0x01 on pci0.7.3 ahc0: rev 0x01 int a irq 10 on pci0.13.0 ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs vga0: rev 0x00 int a irq 9 on pci0.14.0 chip4: rev 0x03 on pci0.15.0 xl0: <3Com 3c905 Fast Etherlink XL 10/100BaseTX> rev 0x00 int a irq 11 on pci0.17.0 xl0: Ethernet address: 00:c0:4f:8c:c1:c1 xl0: autoneg complete, link status good (full-duplex, 100Mbps) Probing for devices on PCI bus 1: vga1: rev 0x5c on pci1.0.0 Probing for devices on PCI bus 2: Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A psm0 irq 12 on isa psm0: model MouseMan+, device ID 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 6149MB (12594960 sectors), 13328 cyls, 15 heads, 63 S/T, 512 B/S wdc1 not found at 0x170 npx0 on motherboard npx0: INT 16 interface vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa Waiting 15 seconds for SCSI devices to settle sa0 at ahc0 bus 0 target 0 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 11) da0 at ahc0 bus 0 target 1 lun 0 da0: Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 8363MB (17127880 512 byte sectors: 255H 63S/T 1066C) changing root device to wd0s1a OSS/FreeBSD loading, address = f0bc1d58 -- ----------------------------------------------------------------------------- Peter Cox - Systems Administrator, Phone: (847) 467 1842 Kellogg Graduate School of Management, Fax: (847) 467 3500 Northwestern University. Email: p-cox@nwu.edu ----------------------------------------------------------------------------- It is impossible to travel faster than light, and certainly not desirable, as one's hat keeps blowing off. -- Woody Allen To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message