Date: Wed, 21 Jul 1999 23:17:38 +0200 From: Marc Fonvieille <fonvi@club-internet.fr> To: questions@FreeBSD.ORG Subject: Miro PC/TV and FreeBSD Message-ID: <19990721231738.A6148@vobiscum.styx.org>
next in thread | raw e-mail | index | archive | help
Hello, I try to make run a Miro PC/TV card on my FreeBSD Box (FreeBSD 3.1R). The card is detected: bktr0: <BrookTree 848A> rev 0x12 int a irq 12 on pci0.13.0 bti2c0: <bt848 Hard/Soft I2C controller> iicbb0: <I2C generic bit-banging driver> on bti2c0 iicbus0: <Philips I2C bus> on iicbb0 master-only iicsmb0: <I2C to SMB bridge> on iicbus0 smbus0: <System Management Bus> on iicsmb0 smb0: <SMBus general purpose I/O> on smbus0 iic0: <I2C general purpose I/O> on iicbus0 smbus1: <System Management Bus> on bti2c0 smb1: <SMBus general purpose I/O> on smbus1 Miro TV, Temic PAL tuner. All seems to be good except the last line: the kernel see a "Temic PAL tuner", but my card is build around a Philips Pal/Secam tuner. So, in my kernel i put this line: options OVERRIDE_TUNER=6 # tuner Philips secam Then, i install fxtv, i config it with the good tuner and the frequencies. but when i run it, i can't obtain a real image... I tryed all options in the kernel or with sysctl but no changes :( I also download the last bt848's driver... It's strange cause the card runs fine under Linux with Xawtv. And i'm not alone with this pb in France. So i think there's a pb between the driver and secam standard with a Miro PC/TV. If someone can help me, it will be great. Marc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990721231738.A6148>