Date: Wed, 14 Feb 2007 10:00:18 +0100 From: Arek Czereszewski <arek@wup-katowice.pl> To: freebsd-questions@FreeBSD.org Subject: mfi0 error Message-ID: <45D2CFA2.9000900@wup-katowice.pl>
next in thread | raw e-mail | index | archive | help
Hi all, I have problem with managing SAS RAID with linux-megacli System: FreeBSD 7.0-CURRENT on i386 Megacli form ports linux-megacli-1.01.09 LSI MegaRAID SAS controller management utility Machine is Fujitsu Siemens TX200 S3 with LSI Megaraid SAS 8300xlp (I have 5 SATA hd) - this controller work only under 7.0 CURRENT. I made raid 5 (via FSC ServerView) and now I try manage array. If i check logical drive or physical drive (ld/pdinfo) # megacli -PdInfo -physdrv \[1:1\] -aAll Enclosure Number: 1 Slot Number: 1 Device Id: 1 Sequence Number: 2 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 Raw Size: 238475MB [0x1d1c5970 Sectors] Non Coerced Size: 237963MB [0x1d0c5970 Sectors] Coerced Size: 237952MB [0x1d0c0000 Sectors] Firmware state: Online SAS Address(0): 0x1221000001000000 Inquiry Data: ATA WDC WD2500JS-55N2E01 WD-WCANK9026749 As you can see everything is show OK. But if i try turn any physycal drive to Offline mode or locate drive system hang and on console I have a lots of messages: mfi0: command 0xc64595f4 secound 54 timeout Any idea what is going on? Regards Arek -- Arek Czereszewski arek (at) wup-katowice (dot) pl "UNIX is like a wigwam: no windows, no gates, apache inside."
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?45D2CFA2.9000900>